References
- N. Q. Minh, ' Ceramic Fuel Cell,' J. Am. Ceram. Soc., 76 [3] 563-88 (1993) https://doi.org/10.1111/j.1151-2916.1993.tb03645.x
- N. Q. Minh and T. Takahashi, ' Science and Technology of Ceramic Fuel Cells,' pp. 1-14, Elsevier Science, Amsterdam (1995)
- H. Moon, J.-H. Lee, and H.-W. Lee, ' Ni Loss During the Fabrication of SOFC Anode, Ni-YSZ Composite(in Korean),' J. Kor. Ceram. Soc., 38 [2] 137-42 (2001)
- J.-H. Lee, J.-H. Moon, H.-W. Lee, J. Kim, J.-D. Kim, and K.-H. Yoon, ' Quantitative Analysis of Microstructure and its Related Electrical Property of SOFC Anode, Ni-YSZ Cermet,' Solid State Ionics, 148 15-26 (2002) https://doi.org/10.1016/S0167-2738(02)00050-4
- J.-H. Lee, J.-W. Heo, D.-S. Lee, J. Kim, G.-H. Kim, H.-W. Lee, H.-S. Song, and J.-H. Moon, ' The Impact of Anode Microstructure on the Power Generating Characteristics of SOFC,' Solid State Ionics, 158 225-32 (2003) https://doi.org/10.1016/S0167-2738(02)00915-3
- H.-W. Lee, B.-G. Yoon, and H.-S. Song, ' Fabrication of Porous Ceramics and Multi-Layered Ceramics Containing Porous Layers; I. Pore Structure(in Korean),' J. Kor. Ceram. Soc., 31 [9] 1044-52 (1994)
- C. Badini, P. Fino, A. Ortona, and C. Amelio, ' High Temperature Oxidation of Multilayered SiC Processed by Tape Casting and Sintering,' J. Eur. Ceram. Soc., 22, 95-102 (2002)
- A. K. Maiti and B. Rajender, ' Terpineol as a Dispersant for Tape Casting Yttria Stabilized Zirconia Powder,' Mater. Sci. and Eng., A333 35-40 (2002)
-
S. L. Morissette and J. A. Lewis, ' Direct-Write Fabrication of Pb(Nb,Zr,Ti)
$O_{3}$ Devices: Influence of Paste Rheology on Print Morphology and Component Properties,' J. Am. Ceram. Soc., 84 2462-68 (2001) https://doi.org/10.1111/j.1151-2916.2001.tb01036.x - V. Tohver, S. L. Morissette, and J. A. Lewis, ' Direct-Write Fabrication of Zinc Oxide Varistors,' J. Am. Ceram. Soc., 85 123-28 (2002) https://doi.org/10.1111/j.1151-2916.2002.tb00052.x
- B. A. Haberman and J. B. Yong, ' Three-Dimensional Simulation of Chemically Reacting Gas Flows in the Porous Support Structure of an Integrated-Planar Solid Oxide Fuel Cell,' Int. J. Heat Mass Transfer, 47 3617-29 (2004) https://doi.org/10.1016/j.ijheatmasstransfer.2004.04.010
- H. Luhleich, J. Dias, and H. Nickel, ' The Coat-Mix Procedure Using Carbon Fillers,' Carbon, 35 95-102 (1997) https://doi.org/10.1016/S0008-6223(96)00120-0
- H.-Y. Jung, T.-W. Roh, J. Kim, H.-W. Lee, H. Ko, K.-C. Lee, and J.-H. Lee, ' Power Generating Characteristics of Anode-Supported SOFC Fabricated by Uni-Axial Pressing and Screen Printing(in Korean),' J. Kor. Cerm. Soc., 41 456-63 (2004) https://doi.org/10.4191/KCERS.2004.41.6.456