한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제42권6호
  • /
  • Pages.417-424
  • /
  • 2005
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

3Y-TZP의 기계적 물성에 미치는 영향: (II) 알루미나의 첨가

Effect on Mechanical Properties of 3Y-TZP; (II) Addition of Alumina

  • 양성구 (경남대학교 대학원 재료공학과, 경남대학교 공동기기센터) ;
  • 배경만 (경남대학교 대학원 재료공학과) ;
  • 조범래 (계명대학교 신소재공학과) ;
  • 강종봉 (경남대학교 신소재공학부)
  • Yang, Seong-Koo (Department of Materials Science and Engineering, Kyungnam University, The Center for Instrumental Analysis in Kyungnam University) ;
  • Bae, Kyung-Man (Department of Materials Science and Engineering, Kyungnam University) ;
  • Cho, Bum-Rae (Department of Advanced Materials Engineering, Keimyung University) ;
  • Kang, Jong-Bong (Division of Advanced Materials Engineering, Kyungnam University)
  • 발행 : 2005.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Although a lot of studies in fracture toughness of Y-TZP ceramics for structural applications have been done, it remains an important challenge to be able to improve fracture toughness of Y-TZP ceramics. In this research, milling method adding monoclinic zirconia and $Al_2O_3$ to 3Y-TZP was introduced to improve the fracture toughness of 3Y-TZP. Experimental results showed that addition of small amount of $Al_2O_3$ causes to make lots of oxygen vacancies (VO) by substituting $Al^{3+}$ for $Zr^{4+}$. It is believed that the produced vacancies provides useful routes far mass transfer. Y-TZP ceramics having higher microhardness and better fracture toughness was fabricated by sintering at $1400^{\circ}C$.

키워드

참고문헌

  1. J. Y. Kim, B. C. Seo, and H. K. Oh, ' Toughness Mechanism and Manufacturing Process of $ZrO_{2}$ Ceramics(in Korean),' Bull. Kor. Ceram. Soc., 7 [1] 80-8 (1992)
  2. R. Singh, C. Gill, S. Lawson, and G P. Dransfield, ' Sintering, Microstruvture and Mechanical Properties of Commercial Y-TZPs,' J. Mater. Sci., 31 6055-62 (1996) https://doi.org/10.1007/BF01152158
  3. O. N. Grigoryev, S. A. Firstov, O. A. Babiy, N. A. Orlovskaya, and G. E. Homenko, ' Effect of Zirconia(3 mol% yttria) Additive on Mechanical Properties and Structure of Alumina Ceramics,' J. Mater. Sci., 29 4633-38 (1994) https://doi.org/10.1007/BF00376289
  4. S. H. Kim, S. Y. Choi, and S. H. Cho, ' Effect of $SiO_{2}$ Addition on Sintering Characteristics in Yttriastabilized Zirconia Ceramics(in Korean),' J. Kor. Ceram. Soc., 25 [6] 601-08 ( 1988)
  5. S. K. Yang, J. Y. Jung, and J. B. Kang, ' Characteristics of Sintered Yttria Stabilized Tetragonal Zirconia Polycrystals(3Y-TZP) with Alumina(in Korean),' J. Kor. Ceram Soc., 41 [2] 601-08 (2004)
  6. M. J. Kim, J. K. Lee, and E. G. Lee, ' Influence of Alumina-dispersion on the Microstructure and Fracture Toughness of Y-TZP Ceramics(in Korean),' J. Kor. Ceram. Soc., 38 [2] 166-72 (2001)
  7. S. Y. Yang, J. H. Lee, J. J. Kim, and J. S. Lee, ' Sintering Behavior of Y-Doped $ZrO_{2}$ Ceramics: The Effect of $Al_{2}O_{3}$ and $Nb_{2}O_{5}$ Addition,' Solid State Ionics., 172 413-16 (2004) https://doi.org/10.1016/j.ssi.2004.03.026
  8. H. S. Oh, Y. B. Lee, Y. W. Kim, K. D. Oh, and H. C. Park, ' Preparation and Characteristics of $Y_{2}O_{3}$-$CeO_{2}$-$ZrO_{2}$ Struc- tural Ceramics: II. Mechanical Properties and Thermal Stability of Sintered Body(in Korean),' J. Kor. Ceram. Soc., 34 [1] 102-08 (1997)
  9. J. K. Lee and H. Kim, ' The Change of Microstructures by Low Temperature Aging in Y-TZP(in Korean),' J. Kor. Ceram. Soc., 27 [6] 735-40 (1990)
  10. M. I. Kim, J. H. Park, D. S. Kang, and S. H. Moon, ' A Study on the Ceria Stabilized Tetragonal Zirconia Polycrystals(Ce-TZP)(I): Effect of $CeO_{2}$ Content on the Mechanical Properties and Fracture Behavior of Ce-TZP(in Korean),' J. Kor. Ceram. Soc., 26 [5] 719-27 (1989)
  11. H. Schubert, ' Anisotropic Thermal Expansion Coefficients of $Y_{2}O_{3}$-Stabilized Tetragonal Zirconia,' J. Am. Ceram. Soc., 69 [3] 270-71 (1986) https://doi.org/10.1111/j.1151-2916.1986.tb07424.x