The Crystal Structure and Mechanical Properties of Thick & Thin yarn According to Production Condition

제조조건에 따른 태세사(Thick & Thin yarn)의 구조와 물성

  • Published : 2005.06.01

Abstract

시료는 POY사 104/192로 Draw-Winder(독일, Zinser)를 이용하여 기존의 태세사 제조장치의 부분적인 개조를 통하여 길이방향으로 강제적인 태세사가 형성되도록 하는 제조기술을 이용하여 Thin-thick yam(T&T사) 6종류를 제조하였으며 제조 조건에 따른 구조변화와 물성에 대하여 연구 검토한 결과 다음과 같다. 결정화도의 변화는 Draw-winder의 R2 roller 온도가 상온인 경우보다 $100^{\circ}C$인 경우가 높게 나타났으며 태세사의 세(thin)부분의 복굴절률은 연신비가 높고 Draw winder의 roller(R2)의 온도가 높을수록 복굴절 값은 선형적으로 증가하였다. T&T사 제조시 연신 온도가 상온인 경우는 Thin부분만 연신이 진행되고 Thick 부분은 원사인 POY사의 성질이 그대로 유지하고 있음을 알 수 있고 R2 roller 온도가 상온에서 제조된 시료의 초기탄성률은 약1.5-2.0kgf/denier 정도로 높게 나타났으나 $100^{\circ}C$로 제조된 시료는 약 0.2-0.8kgf/denier 정도로 낮게 나타났다.

Keywords

References

  1. Selivansky D and Lewin M, Strain Phenomena of POY Revealed by Thermal Retraction and Other Techniques I. Fundamental Aspects, J. Appl. Polym. Sci., 27, 2337-2349(1982) https://doi.org/10.1002/app.1982.070270703
  2. DESAI P and ABHIRAMAN A. S, Crystalization in oriented poly(ethylene terephthalate) Fiber I. Fundamental Aspects, J. Appl. Polym. Sci., Polym. Phys. Ed., 23, 653-674(1985) https://doi.org/10.1002/pol.1985.180230404
  3. Ikeda R.M, Shrinkage Measurements of Stress -Induced Crystallization in Oriented Amorphous PET J. Polym. Sci., Polym. Lett. Ed., 18, 325-331(1980) https://doi.org/10.1002/pol.1980.130180502
  4. Hristov H.A and Schultz J.M, Thermal Response and Structure of PET Fibers, J. polym. Sci., Part B: Polym. Phy., 28, 1647-1663(1990) https://doi.org/10.1002/polb.1990.090281001
  5. Lopatin G, Thermal Reaction of Polymer POY by a Novel Semi micro technique, J. Appl. Polym. Sci., Appl. Polym. Sym., 31, 127-132(1977)
  6. Selivansky D and Lewin M, Straining Phenomena of POY Revealed by Thermal Retraction and Other Techniques, J. Appl. Polym. Sci., 27, 2337-2349(1982) https://doi.org/10.1002/app.1982.070270703
  7. Warwicker J. O and Vevers B, The Dimensional Changes of Oriented Polyester Yarns Subjected to Dry and Wet Heat, J. Appl. Polym. Sci., 25, 977-995(1980) https://doi.org/10.1002/app.1980.070250601