Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Optimal Design of Rocker Arm Shaft Using Improved Genetic Algorithm

개선된 유전자 알고리즘을 이용한 로커암 축의 최적설계에 관한 연구

  • 이수진 (동아대학교 대학원 기계공학과) ;
  • 안용수 (동아대학교 대학원 기계공학과) ;
  • 이동우 (동아대학교 기계공학과) ;
  • 조석수 (삼척대학교 자동차공학과) ;
  • 주원식 (동아대학교 기계공학과)
  • Published : 2005.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study proposes a new optimization algorithm which is combined with genetic algorithm and ANOM. This improved genetic algorithm is not only faster than the simple genetic algorithm, but also gives a more accurate solution. The optimizing ability and convergence rate of a new optimization algorithm is identified by using a evaluation function which have several local optimum and an optimum design of rocker arm shaft. The calculation results are compared with the simple genetic algorithm.

Keywords

References

  1. Kim Yunsik, Kim Jonghun and Lee Jongsoo, 2000, 'Optimization of Transonic Airfoil using GA based on Neural Network and Mutilple Regression Model,' Transactions of KSME(A), Vol. 6, No. 12, pp. 2556-2564
  2. Daly, P., 1998, 'Multidisciplinary Structural Optimization utilizing Genetic Algorithm Capabilities,' Proceedings of the AIAA/USAF/ NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization-Part I, pp. 553-558
  3. Choi, W. H., Yang, B. S. and Joo, H. J., 1996, 'Optimum Field Balancing of Rotating Machinery Using Genetic Algorithm,' Transactions of KSME (A), Vol. 20, No. 6, pp. 1819-1826
  4. Park, S. H. 1998, Applied Experimental Design, Youngchi, SEOUL
  5. Phadke, M. S., 1989, Quality Engineering Using Robust Design, Prentice Hall, New Jergy
  6. Wang, G. Gary, Dong Zuomin and Aitchison, Peter 2001, 'Adaptive Response Surface Method - A Global Optimization Scheme for Approximation-based Design Problems,' Engineering Optimization, Vol. 33, pp. 707-733 https://doi.org/10.1080/03052150108940940
  7. Schaffer, J. D., 1989, 'A study of control parameters affecting online performance of genetic algorithm for function optimization,' Proc. of the 3rd Int'l Conf. on Genetic Algorithm, pp. 51-61
  8. Lee, S. J., An, Y. S., Lee, D. W., Cho, S. S. and Joo, W. S., 2003, 'An Estimation on Failure boundary Condition of Rocker Arm Shaft for 4-Cylinder SOHC Engine using Orthogonal Array,' Fall Conference Proceeding, KSAE, Vol. II, pp. 1435-1440