소성∙가공 (Transactions of Materials Processing)

  • 제14권3호
  • /
  • Pages.187-199
  • /
  • 2005
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

쾌속조형공정의 원리 및 기술 동향

Principle and Recent Trend of Rapid Prototyping Technology

  • 김효찬 (한국과학기술원 기계공학과) ;
  • 박상후 (한국과학기술원 기계공학과) ;
  • 양동열 (한국과학기술원 기계공학과)
  • 발행 : 2005.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. Paul F. Jacobs, 1996, Stereolithography and other RP&M Technologies from Rapid Prototyping to Rapid Tooling, ASME Press
  2. 박근, 윤정환, 양동열, 조종래, 1996, 쾌속 3 차원 조형법과 유한요소해석을 연계한 소성가공 금형설계의 동시공학적 접근방법, 한국정밀공학회지, Vol. 13, No. 8, pp. 146-154
  3. 양동열, 손현기, 2000, 쾌속제품개발(RPD)을 위한 쾌속조형기술의 최근동향, 한국정밀공학회지, Vol. 17, No, 10,pp. 5-10
  4. T. T. Wohler, 2004, Wohlers Report 2004, Rapid Prototyping & Tooling State of the industry, Wohler's Associates Inc
  5. http://www.cadcamnet.com
  6. P. Kulkarni, A. Marsan, D. Dutta, 2000, A review of process planning techniques III layered . manufacturing, Rapid Prototyping J., Vol.6, No.1, pp. 18-35
  7. X. Yan, P. Gu, 1996, A review of rapid prototyping technologies and systems, Computer Aided Design, Vol.28, No.4, pp. 307-318 https://doi.org/10.1016/0010-4485(95)00035-6
  8. D. T. Pham, R. S. Gault, 1997, A comparison of rapid prototyping technologies, Int. J. Mach. Tool. Manu., Vol.38, pp. 1257-1287 https://doi.org/10.1016/S0890-6955(97)00137-5
  9. http://www.3dsystems.com
  10. http://www.stratasys.com
  11. http://solid-scape.com
  12. ttp://www.zcorp.com
  13. http://www.2objet.com
  14. D. G. Ahn, S. H. Lee, D. Y. Yang, 2002, Investigation into thermal characteristics of linear hotwire cutting system for variable lamination manufacturing (VLM) process by using expandable polystyrene foam, Int. J. Mach. Tool. Manu., Vol. 42, No.4, pp. 427-439 https://doi.org/10.1016/S0890-6955(01)00144-4
  15. 안동규, 이상호, 양동열, 신보성, 박승고, 이용일, 2001, 발포 폴리스티렌 폼을 이용한 가변적층 쾌속 조형 공정 및 장치 개발, 한국정밀공학회지, Vol. 18, No. 8, pp. 54-63
  16. S. Kawata, H. B. Sun, T. Tanaka, K. Takada, 2001, Finer features for functional microdevices, Nature, Vol.412, No.16, pp. 697-698 https://doi.org/10.1038/35089130
  17. J. Serbin, A. Egbert, A. Ostendorf, B. N. Chichkov, 2003, Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics, Optics letters, Vol.28, No.5, pp. 301-303 https://doi.org/10.1364/OL.28.000301
  18. S. H. Park, T. W Lim, D. Y. Yang, H. J. Kong, K. S. Kim, K. S. Lee, 2004, Fabrication of Nanoprecision PDMS Replica using Two-photon Photopolymerization and Vacuum Pressure Difference Technique, B. Korean Chem. Soc. (communication), Vol. 25, No.8, pp. 1119-1120 https://doi.org/10.5012/bkcs.2004.25.8.1119
  19. 박상후, 임태우, 이상호, 양동열, 공홍진, 이광섭, 2005, 이광자 광중합의 윤곽선 스캐닝법에 의한 마이크로 입체형상 제작, Polym. Korea, Vol. 29, No. 2, pp. 146-150
  20. T. W Lim, S. H. Park, D. Y. Yang, 2005, Contour Offset Algorithm (COA) for Precise Patterning in Two-photon Polymerization, Microelectron. Eng., Vol. 77 , pp. 382-388 https://doi.org/10.1016/j.mee.2005.01.022

피인용 문헌

  1. Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process vol.47, pp.4, 2013, https://doi.org/10.1177/0021998312441812
  2. Development of Innovative Light Water Reactor Nuclear Fuel Using 3D Printing Technology vol.33, pp.4, 2016, https://doi.org/10.7736/KSPE.2016.33.4.279