A Study on Endurance Estimation of ultra Precision Reverse-Locking Clutches under Contact Condition

접촉상태에 있는 초정밀 역전방지클러치의 내구성 평가에 관한 연구

  • Published : 2005.06.01

Abstract

A dangerous event occurred at the field industry and mechanical system. At developed by SUNGGOKNANOTECH corp. a R-L clutches of a small and high capacity serves safety device from a variety environment of mechanical system, it permits transmission of driving torque from input to output shaft in both directions of rotation, but restrains any feedback torque of the driven load from rotating the output shaft in either direction. This study was carried out to demonstrate through finite element method and durability estimation for safety of the R-L clutches without sliding during the engagement process. As results, we organized about endurance test method when applied rated torque.

Keywords

References

  1. Melville, P. H., 'Fracture Mechanics of Brittle Material in Compression,' International Journal of Fracture, Vol. 13, pp. 532-534, 1977 https://doi.org/10.1007/BF00034257
  2. Goo, B. C., Seo, J. W., 'Thermoelastic Contact Analysis of Drums Brakes by Finite Element Method,' The Korean Society of Automotive Engineers, Vol. 9, No. 3, pp. 173-180, 2001
  3. Hong, S. H., Cho., S. H. and Joo, W. S., 'A Study on the Safety Estimation of Low Pressure Torsion Mounted Turbine Blade,' Journal of the Korean Society of Precision Engineering, Vol. 20, No. 3, March 2003
  4. Sheppard, S., Barber, J. R. and Comnunou, M., 'Short Subsurface Cracks Under Conditions of Slip and Stick Caused by a Moving Compressive Load,' Journal of Applied Mechanics, Vol. 52, No. 12, pp. 811-817, 1985 https://doi.org/10.1115/1.3169151
  5. Kim, B. W., Kim, Y. K. and Lee, K. S., 'Frictional Contact Analysis of the Crack Surface Under the Compressive Loading,' Journal of the Korean Society of Precision Engienering, Vol. 18, No. 7, July 2001
  6. Jang, D. H., Cho, S. H. and Hwwang, B. B., 'Finite Element Analysis for Frictional Contact Problems of Axisymmetric Deforming Bodies,' Transactions of Materials Processing, Vol. 12, No. 1, 2003
  7. Roberts, Brian, 'Three-Dimensional Roller Wrench and Human Performance Neutral Buoyancy Laboratory 98.2 Test Results,' Space Systems Laboratory University of Marland College Park, SSL Document Number 99-001, March 1999
  8. Kim, T. B., Kim, D. K., Lee, S. J., Kim, I. S., Lee, W. R., Lee, D. K., 'A Study on the Fatigue Test and Performance Evaluation for Linear Motion Rolling Bearing,' Proc. Korean Society of Precision Engineering,pp. 1270-1274, June, 2003
  9. Jung, E. W., Choi, B. L., Jeon, J. W., 'A Consideration on the Strength and Durability Estimation Techniques in Passenger Car,' Journal of the Korean Society of Automotive Engineers, Vol. 015, No. 004, pp. 34-43, 1993