Design and Fabrication of a W-band FMCW Radar for the Metal Target Detection Under the Ground Clutter Environment

지면 클러터 환경에서 금속표적감지를 위한 W-대역 FMCW 레이더의 설계 및 제작

  • Published : 2004.09.01

Abstract

In this paper, we describe the design, fabrication, and test results of a W-band FMCW radar for the metal target detection under the ground clutter environment. In order to detect metal targets on the ground, we used a single cassegrain antenna with the beamwidth of $1.45^{\circ}$ which forms pencil-beam footprint on the ground. A log envelope detector was applied to improve radar performance in the severe ground clutter known as Weibull and log normal clutter. The designed FMCW radar can acquire altitude information from the ground clutter with $\sigma_0=-23dB$ at the height of 160m. The fabricated W-band FMCW radar transmits 11 dBm power and the dynamic range of the receiver is from -106dBm to -30dBm. The performances of the fabricated sensors were tested out in the fields and detected a car target of 200m apart on the grass.

Keywords

References

  1. Lawrence A. Klein, Millimeter-Wave and infrared Multisensor Design and Signal Processing , Artech House, 1997, pp.59, pp.164 ~ 188, pp.117
  2. A. G. Stove, 'Linear FMCW radar techniques', IEE PROCEEDINGS-F, Vo!. 139, No.5, October, 1992
  3. 박정동,정명숙,김완준 'W 대역 FMCW 레이 더 IF보완설 계 및 제작', 기술보고서, TEDC517- 040399, 국방과학연구소, April, 2004
  4. Nicholas C. Currie, Robert D. Hayes, Robert N. Trebits, Millimeter-wave Radar Clutter, Artech House, 1992, pp.198
  5. Barton, David K., Radar technology encyclopedia, Artech House, 1998, pp.94
  6. N. C. Currie, Principles and Applications of Millimeter-wave Radar, Artech House, 1987, pp.22~28