Modal based Structural Model Modification Using Genetic Algorithm

유전자 알고리즘을 이용한 모드기반 교량의 해석모델개선

  • 윤정방 (한국과학기술원 건설 및 환경공학과) ;
  • 이종재 ;
  • 이정석 (한국시설안전기술공단 연구개발팀) ;
  • 전귀현 (한국시설안전기술공단 연구개발팀) ;
  • 이진학 (한국과학기술원 스마트사회기반시설연구센터)
  • Published : 2004.12.01

Abstract

This study presents the structural model modification based on the modal data such as natural frequencies and mode shapes. Preliminary structural model can be obtained using design drawings and field measurement, and therefore the deteriorated stiffness of a structure and the effect of the boundary conditions are difficult to be evaluated in preliminary analysis model, and the preliminary model can be modified using structural response data including static and/or dynamic characteristics. In this study, the structural model is modified based on the structural modal data using genetic algorithm. Modal testing were carried out for Imjin River Bridge and Hangjoo Bridge, the modal properties were estimated using modal identification techniques, and finally the structural models were updated using genetic algorithm. The modified structural model could give us more reliable structural analysis results and therefore those can be used for structural performance evaluation such as load carrying capacity and seismic capacity.

이 연구에서는 교량의 모드자료를 이용한 구조해석모델의 개선에 관하여 연구하였다. 교량의 초기해석모델은 도면 및 현장조사결과를 바탕으로 작성되므로, 시간에 따라 손실된 강성의 영향 및 경계조건 등을 합리적으로 반영하기 어려우며, 따라서 구조물에 대한 정적 혹은 동적실험을 수행하고, 그 결과를 반영하여 해석모델을 개선하는 것이 바람직하다. 이 연구에서는 구조물의 고유주파수 및 모드형상 등의 모드특성을 바탕으로 추계론적 최적화 기법인 유전자 알고리즘을 이용하여 해석모델을 개선하고자 하였다. 임진강교 및 행주대교에 대한 동적실험 자료를 이용하여 교량의 모드특성을 추정하였으며, 추정된 모드특성을 바탕으로 유전자 알고리즘을 이용하여 수치해석모델을 개선하였다. 개선된 모델을 사용하여 해석한 결과, 초기해석모델에 의한 해석결과보다 실험으로 추정한 모드특성에 가까움을 확인하였고, 이로부터 개선모델의 합리성을 검증하였다.

Keywords

References

  1. 김기화, '유전자 알고리즘', 전산구조공학 제9권 제2호, 1996, pp.28-35
  2. 양영순, 김기화, '실수형 Genetic Algorithm에 의한 최적 설계', 전산구조공학 제8권 제2호, 1995, pp.123-132
  3. Goldberg. D.E., Genetic algorithms in search. optimization. and machine learning. Addison Wesley: Reading, MA. USA, 1989
  4. Kirkpatrick, S., Gelatt Jr C.D., Vecchi, M.P., 'Optimization by simulated annealing', Science, Vol. 20, No.4598, 1998, pp.671-690
  5. Ceranic, B., Fryer, C., and Baines, R.W., 'An application of simulated annealing to the optimum design of reinforced concrete retaining structures', Computers and Structures, Vol.79, 2001, pp.1569-1581
  6. Manoharan, S., Shanmuganathan, S. 'A comparison of search mechanisms for structural optimization', Computers and Structures. Vol. 73, 1999, pp.363-372
  7. Hadi, M.N.S., Arfiadi, Y., 'Optimum rigid pavement design by genetic algorithms.' Computers and Structures, Vo1.79, pp.1617-1624
  8. Kim, Y.J... Ghaboussi. J., 'Direct use of design criteria in genetic algorithm based controller optimization', Earthquake Engineering and Structural Dynamics, Vol.30, 2001, pp.1261-1278
  9. Chou, J.H.. Ghaboussi. J., 'Genetic algorithm in structural damage detection', Computers and Structures, Vol.79, 2001, pp.1335-1353
  10. Mares, C., and Surace, C., 'An application of genetic algorithms to identify damagein elastic structures', Journal of Sound and Vibration Vol. 195, No.2, 1996, pp.195-215
  11. Felber, A.J., Cantieni. R., 'Introduction of a new ambient vibration testing system-Description of the system and seven bridge tests,' EMPA Report No.156, 1996
  12. 심종민 '유전자 알고리즘을 이용한 교량의 구조계수규명', 한국과학기술원 토목공학과 석사학위논문, 2001
  13. Overschee V.P. De Moor, B., Subspace Identification for Linear Systems, Kluwer Academic Publisher, 1996
  14. Peeters, B. De Roeck, G. 'Reference Based Stochastic Subspace Identification for Output Only Modal Analysis', Mechanical Systems and Signal Processing, Vol.13, No.6, 1999, pp.855-878
  15. Hermans, L. Van Der Auweraer, H.,'Modal Testing and Analysis of Structures under Operational Conditions: Industrial Applications', Mechanical Systems and Signal Processing, Vol.13, No.2, 1999, pp.193-216
  16. 한국시설안전기술공단 '동적계측결과를 이용한 교량의 손상도 평가,' 한국시설안전기술공단 연구보고서 TS03-R3-001, 2003