경험적인 방법에 의한 강제치환 심도 예측

Prediction of Compulsory Replacement Depth by Empirical Method

  • 홍원표 (중앙대학교 건설환경공학과) ;
  • 한중근 (중앙대학교 건설환경공학과) ;
  • 이종영 (한국시설안전기술공단 기술개발실)
  • Hong Won-Pyo (Dept. of Civil & Environmental Engrg., Chung-Ang Univ.) ;
  • Han Jung-Geun (Dept. of Civil & Environmental Engrg., Chung-Ang Univ.) ;
  • Lee Jong-Young (Technology Dvelopment Lab, Korea Infrastructure Safety & Technology Corp.)
  • 발행 : 2004.12.01

초록

본 연구에서는 기존에 제안된 각 연구자들의 치환심도 산정식을 고찰하고, 이를 토대로 영향인자를 고려한 수정식을 제안하였으며, 제안된 수정식을 국내 대표적인 강제치환 시공 사례지역인 남해안 광양만일대(여천, 율촌, 광양)의 시공사례에 적용하여 국내지반에서의 적용성을 조사하여 보았다. 또한 지반조사 결과를 바탕으로 산정된 수정성토하중과 극한지지력의 관계로부터 수정지지력계수를 결정하였으며, 결정된 수정지지력계수를 적용하여 치환심도를 예측하였다. 그리고 율촌, 여천지역의 시공시 각 영향인자별 상관성 분석을 통한 상호관계를 유도함으로서 인접지역 또는 유사지 역에서 치환심도를 예측할 수 있는 경험적 인 치환심도 예측기법을 제안하였고, 제안된 경험식을 광양지 역에 적용한 결과 예측결과는 실제 치환심도와 매우 근사한 결과를 나타내었다.

Based on the previous studies proposed by many researchers about the evaluation method of replacement depth, a modified formula which incorporates the effect factors such as embanked height and load, replacement depth, cohesive force of original ground and unit weight of embankment etc, was suggested in this study. The new proposed formula was applied in the three construction sites of Kwangyang-Bay Area (Yeocheon, Youlchon, and Kwangyang) constructed by the compulsion replacement method. The application of the new method was investigated through these case studies in domestics. A modified bearing capacity parameter was estimated form the relationship of modified embankment loading and ultimate bearing capacity resulted from the site investigation, and the replacement depth was predicted by using this parameter. In addition, through the relationship analyses between each effect factors to the replacement depth in two areas, Yeocheon and Youlchon, an empirical prediction method which can evaluate the replacement depth in adjoining area was proposed. The predicted value obtained by new method is approximately similar to the measured replacement depth in Kwangyang area.

키워드

참고문헌

  1. 농어촌진흥공사 (1984), 방조제 단면에 관한 연구, pp.195-209
  2. (주)동아컨설턴트 (1997. 11), 율촌 제1지방산단 조성공사 지반조사 종합보고서(현대부지)
  3. (주)동아컨설턴트 (1998. 9), 여천국가 공업단지 확장단지 제3공구 조성공사(치환량 확인조사)지질조사 보고서
  4. (주)동아컨설턴트 (1999. 11), 여천국가 산업단지 확장단지 제3공구 조성공사(치환량 확인조사)지질보사 보고서
  5. (주)동아컨설턴트 (1999. 12a), 율촌 제1지방산단 조성공사 현대부지 지반조사 종합 보고서
  6. (주)동아컨설턴트 (1999. 12b), 중소기업부지 지반조사 종합보고서
  7. 신현영 (1999), 강제치환 심도산정에 영향을 미치는 인자에 관한 연구, 석사학귀 논문, 중앙대학교
  8. 이승호 (1992), 토질구조물 축조에 의한 연약 점토지반의 변형에 관한 연구, 박사학위 논문, 한양대학교
  9. 이양희 (1982), 강제치환 공법에 의한 변위 특성, 석사학위 논문, 동국대학교
  10. 이종영 (2002), 연약지반상에 호안 축조기 강제치환 심도산정에 관한 연구, 석사학위 논문, 중앙대학교
  11. 홍원표, 한중근, 이종영 (2002), 지지력 공식을 이용한 강제치환 심도산정(사례연구), 대한토목학회 학술발표회 논문집
  12. 전라남도 (1995. 2), 율촌 제1지방 공업단지 조성공사 토질조사 보고서
  13. 삼중엔지니어링 (1998. 6), 여천국가산업단지 확장단지 제2공구 조성공사 중 확인보링 및 토질조사 보고서
  14. Terzaghi, K. (1943), Theoretical Soil Mechanics, John Wiley & Sons, New York, pp.265-296
  15. Timoshenko S.P., Goodier J.N. (1951), Theory of Elasticity, McGraw-Hili, New York
  16. Weber Jr. E. G. (1952), Construction of a fill by a mud displacement method, VoI.41, Highway research proceeding, pp.591-610
  17. Yashuhara. K. and Tsukamoto, Y. (1982), 'A rapid banking method using the resinous mesh on soft reclained land', 2nd International Conference on Geotextiles, Las Vegas, U.S.A, pp.635-640