Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

A Study on Characteristics of Inconel 625 for Petroleum Application by FCAW Process ; Effect of Shield Gases Change Influence on a Mechanical Properties

석유시추용 인코넬 625강의 FCAW 용접에 관한 연구 ; 보호가스 변화가 기계적 성질에 미치는 영향

  • PARK KEYUNG-DONG (Pukyoung National University Dept. of Mechanical Engineering) ;
  • JIN YOUNG-BEOM (Pukyoung National University Dept. of Mechanical Engineering) ;
  • PARK HYOUNG-DONG (Pukyoung National University Dept. of Mechanical Engineering)
  • 박경동 (부경대학교 기계공학부) ;
  • 진영범 (부경대학교 기계공학부) ;
  • 박형동 (부경대학교 기계공학부)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Inconel 625 is useful in a variety of industrial applications because of the resistance to attack in various corrosive media at temperatures from $200^{\circ}C$ to over $1090^{\circ}C$, in combination with good low and high temperature mechanical strength. Rencently this material has also been widely used in offshore processing piping in order to extend the maintenance term and improve the quality of anti-corrosion. In general, high quality weldings for this material are readily produced by commonly used processes. How, not all processes are applicable to this material group of Ni-alloys. Metallurgical or the unavailability of matching, position or suitable welding processes produce a lower quality. Nowadays, the flux cored wire is developed and applied for increased productivity in several welding positions, including the vertical position. In this study, the weldability and weldment characteristics(mechanical properties) of inconel 625 are considered in FCAW(Flux Core Arc Welding) associated with the several shielding gases$(80\%Ar+20\%CO2,\;50\%Ar+50CO2,\;100CO2)$ in view of welding productivity.

Keywords

References

  1. 박경동, 정재욱 (2004). '석유시추용 인코넬 625강의 FCAW용접에 의한 저온 충격강도에 관한 연구', 한국해양공학회 춘계학술대회, pp 356-359
  2. 박경동, 안재필 (2004). '석유시추용 인코넬 625강의 FCAW용접에 의한 부식성에 관한 연구' 한국해양공학회 춘계학술대 회, pp 365-369
  3. Cieslak, M.J. (1991). 'The Welding and Solidification Metalluigy of Alloy 625', Welding Joumal Vol 70, No 2, PP 49-56
  4. Cieslak, M.J., Headley, T. J. and Frank, R.B. (1989). 'The Welding Metallurgy of Custom Age 625 PLUS Alloy', Welding Joumal, Vol 68, No 12, pp 473-482
  5. Dupont, J.N. (1996). 'Solidification of an AUoy 625 Weld Overlay', Metallurgical and Material Transacdons A, Vol 27A, No 3, pp 3612-3620
  6. Dupont, J.N. (1997). Solidification and Welding Metallurgy of Experimental Ni Base and Fe Base Alloys Containing Nb, Si, and C, Ph.D Thesis, Lehigh University, pp 6-12
  7. Dupont, J. N, Rohino, C V., Marder, A. R (1997). 'Solidification of Nb-hraring superalloys, Part Ⅱ : Pseudo-ternarySolidification Surfaces', Vol 28, No 2, pp 81-90
  8. Lee, B.Y (1991). 'Welding Construction System', Journal of KWS, Vol 16, No 3, pp 38-39
  9. Zhao, Q. H., Gao, Y., Devletian, J. H., Mccarthy, J. M. and Wood, W. E. (1992). 'Microstructural Analysis of Ni Alloy 625 Cladding over Carbon Steel', Proc. of 3rd Int. Conf. International Trends in Welding Science and Technology. David S.A. and Vitek, J.M. eds., ASM, Matehals Park, pp 339-343