산업공학 (IE interfaces)

  • 제17권2호
  • /
  • Pages.218-225
  • /
  • 2004
  • /
  • 1225-0996(pISSN)
  • /
  • 2234-6465(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지

외부 부하와 반복에 따른 팔 동작의 심물리학적 자세 부하

Psychophysical Stress of Arm Motions at Varying External Load and Repetition

  • 기도형 (계명대학교 산업시스템공학과)
  • Kee, Do-Hyung (Department of Industrial and Systems Engineering, Keimyung University)
  • 투고 : 2003.12.13
  • 심사 : 2004.05.12
  • 발행 : 2004.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to investigate effect of external load and motion repetitiveness on perceived discomfort. An experiment was performed for measuring discomfort scores at varying conditions, in which external load, motion repetitiveness and arm posture were employed as experimental variables. The arm posture was controlled by shoulder flexion and abduction, and by elbow flexion. Fifteen healthy college-age students without history of musculoskeletal disorders voluntarily participated in the experiment. The results showed that the effect of external load, motion repetitiveness and shoulder posture on discomfort were statistically significant, but that elbow posture did not significantly affect discomfort ratings. The effect of external load was much larger than that of any other variables, and that of repetitiveness was second only to external load. Discomfort scores significantly increased linearly as the levels of external load and motion repetitiveness increased. This implies that although they were not fully reflected in the existing posture classification scheme such as OWAS, RULA, etc., the effect of external load and motion repetitiveness should be taken into consideration for precisely quantifying work load in industry. Based on regression analysis, equivalent values of external load and motion repetitiveness in terms of discomfort scores were provided, which would be useful for better understanding the degree of their effect on work load.

키워드

참고문헌

  1. Carey, E.J. and Gallwey, T.J. (2002), Effects of wrist posture, pace and exertion on discomfort, International Journal of Industrial Ergonomics, 29, 85-94
  2. Colombini, D. (1998), An observational method for classifying exposure to repetitive movements of the upper limbs, Ergonomics, 41(9),1261-1289
  3. Dahalan, J.B. and Fernandez, J.E. (1993), Psychophysical frequency for a gripping task, International Journal of Industrial Ergonomics, 12, 219-230
  4. Gescheider, G.A.(1985), Phychophysics J: method, theory, and Application, Lawrence Erlbaum Associates, New Jersey
  5. Hagberg, M., Silverstein, B., Wells, R, Smith, M.J., Hendrick, H.W., Carayon, P. and Perusse, M. (1995), Work related musculoskeletal disorders (WMSDs), Taylor & Francis, London
  6. Hansson, G.A., Balogh, I., Ohlsson, K., Palsson, B., Rylander, L. and Skerfving, S. (2000), Impact of physical exposure on neck and upper limb disorders in female workers, Applied Ergonomics, 31, 301-310
  7. Hignerr, S. and McAtamney, L. (2000), Rapid entire body assessment(REBA), Applied Ergonomics, 31, 201-205
  8. Karhu, O., Kansi, P. and Kuorinka, I.(1977), Correcting working postures in industry: a practical method for analysis, Applied Ergonomics, 8(4), 199-2001
  9. Kim; C-H. and Fernandez, J.E. (1993), Psychophysical frequency for a drilling task, International Journal of lndustrial Ergonomics, 12, 209-218
  10. Kuorinka, I. and Forcier, L. (1995), Work-related musculoskeletal disorders (WMSDs): A reference book for prevention, Taylor and Francis, London
  11. Kwon, O. C. and You, H-C. (2003), A survey of repetitiveness assessment methodologies for hand-intensive tasks, Journal of the Ergonomics Society of Korea, 22(3), 75-91
  12. Lin, M.L. and Radwin, R.G. (1997), A single metric for quantifying biomechanical stress in repetitive morions and exertions, Ergonomics, 40(5), 543-558
  13. Lin, M.L. and Radwin, R.G. (1998), Agreement between a frequency-weighted filter for continuous biomechanical measurements of repetitive wrist flexion against a load and published psychophysical data, Ergonomics, 41(4), 459-475
  14. Marley, R.J. and Fernandez, J.E. (1995), Psychophysical frequency and sustained exertion ar varying wrist postures for a drilling task, Ergonomics, 38(2), 303-325
  15. McAramney, L. and Corlerr, E.N. (1993), RULA: a survey method for the investigation of work-related upper limb disorders, Applied Ergonomics, 24(2), 91-99
  16. Ministry of Labor (2003), Statistics of Industrial accidents of 2002
  17. Niebel, B. and Freivalds, A. (1999), Methods standards & work design, McGraw-Hill, Seoul
  18. Rodgers, S. (1986), Ergonomic design for people at work, Van Nostrand Reinhold, New York
  19. Silverstein, B.A., Fine, L.J.and Armstrong, T.J. (1986), Hand wrist cumulative trauma disorders in industry, British Journal of Industrial Medicine, 43, 779-784
  20. Van Cott, H.P. and Kinkade, R.G. (1972), Human engineering guide to equipment design, American Institute for Research, Washington, D.C
  21. Winkel, J. and Mathiassen, S.E. (1994), Assessment of physical work load in epidemiological studies: concepts, issues and operational considerations Ergonomics, 37(6), 979-988