Consolidation Test Method Considering Sample Deformation Due to Stress Release by Sampling

시료채취에 의한 응력해방시 시료변형을 고려한 압밀시험

  • Published : 2004.09.01

Abstract

When a saturated clay is sampled from a borehole in an undisturbed manner, the exerted negative pore water pressure restricts the volume expansion. The vertical and horizontal stresses to which the clay was subjected in the ground are smaller and larger than this isotropically confining stress equivalent to the mean principal stress in the ground, respectively. Therefore the sample expands vertically and shrinks laterally under an undrained condition. In the ordinary consolidation test, the sample thus deformed is trimmed to fit the inside of the consolidometer ring. Thus, the specimen generates larger consolidation displacement due to confining larger horizontal stress when in-situ effective pressure is loaded. The specimen does not reproduce the in-situ consolidation behavior, In this paper, considering sample deformation, the test specimen is made to expand laterally to fit the inside of the ring in the undrained manner when the in-situ effective pressure is loaded. And applicability of this proposed test procedure was verified; results from the conventional consolidation test procedure are also discussed.

포화점토가 보오링공에서 불교란시료로써 채취되면, 부의 간극수압이 체적팽창을 억제한다. 이 점토시료에는 지반중에서 작용한 평균주응력이 등방적으로 작용하며, 이 평균주응력은 수직응력보다 작고, 수평응력보다 크다. 그러므로 시료는 비배수조건하에서 수직으로 늘어나고, 수평으로 수축하게 된다. 통상적인 압밀시험은 이와 같이 변형된 시료를 그대로 사용하여 압밀링 크기와 똑같이 성형한 후 수행한다. 따라서 지반중의 유효상재압이 재하되면, 이 압력이 수평응력보다 크기 때문에 압밀량이 늘어나게 된다. 즉 압밀시험공시체는 현장의 압밀거동을 정확하게 나타내지 못하고 항상 아래에 위치하게 된다. 이 논문에서는 상기와 같은 시료변형의 영향을 고려하여, 압밀시험 공시체에 유효상재압이 재하되었을때 수평방향으로 비배수 변형하여 압밀링 내경에 밀착해도록 하였다. 그리고 제안하는 시험법의 적용성과 결과를 통상적인 압밀시험결과와 검토하였다.

Keywords

References

  1. lnterpItation and application ofground survey and soil test results (1998), Japanese Geotechinical Society, pp.229-233 (in Japanese)
  2. Kim J. and Takada N. (2001), 'Consolidation test method to reflect sample deformation due to stress release', Journal of JSCE, No. 680 / III-55, pp.263-268 (in Japanese).
  3. Kim J. (2003), Q&A. Korean Geotechinical Society, Vol.19, No.5, pp.55-58
  4. Takada N. and Hamada T. (1993), 'Measurement of deformation of clay sample after sampling', Proc. of annual convention of JSCE, IIl-456 (in Japanese)
  5. Recommendation Design of Building Foundation (1988), Architectural Institute of Japan, pp.137-138 (in Japanese)