Effect of Aqueous Phase Composition on the Stability of a Silica-stabilized Water-in-oil Emulsion

유화제로서 실리카를 이용한 유중수형 에멀젼의 안정성에 미치는 수상부 조성의 영향

  • Kim Jin-Hwang (Cosmetic R&D Center, LG Household & Healthcare Research Park) ;
  • Kim Song-I (Cosmetic R&D Center, LG Household & Healthcare Research Park) ;
  • Kyong Kee-Yeol (Cosmetic R&D Center, LG Household & Healthcare Research Park) ;
  • Lee Eun-Joo (Cosmetic R&D Center, LG Household & Healthcare Research Park) ;
  • Yoon Moung-Seok (Cosmetic R&D Center, LG Household & Healthcare Research Park)
  • 김진황 (LG생활건강 기술연구원 화장품연구소) ;
  • 김송이 (LG생활건강 기술연구원 화장품연구소) ;
  • 경기열 (LG생활건강 기술연구원 화장품연구소) ;
  • 이은주 (LG생활건강 기술연구원 화장품연구소) ;
  • 윤명석 (LG생활건강 기술연구원 화장품연구소)
  • Published : 2004.11.01

Abstract

The extent of silica flocculation can be modified by varying the silica concentration, aqueous phase pH, salt and polvmer concentration. High volume fraction W/O emulsion stabilized by hydrophobic silica was established with various aqueous phase conditions for cosmetic application. By increasing the silica concentration up to $1.0\;wt\%,$ the size of droplet decreased. A high silica concentration increased the viscosity of continuous oil phase by network formation, which resulted in target size of droplet. The stability of W/O emulsion is improved as increasing the aqueous phase pH. At low and intermediate pH, the emulsions became more stable by adding salt $(0.083\;mol\;dm^{-3}\;MgSO_4).$ At high PH, the presence of salt caused significant destabilization. The gelation behavior of the emulsion indicates that the effect of salt on silica-stabilized emulsion is derived from an electrostatic attraction. The addition of xanthan gum in aqueous phase increased the mono-dispersity of the W/O emulsion by making water more hydrophobic and hindering the recombination of droplets. In conclusion, these results indicate that very stable emulsifier-free, finely dispersed W/O emulsion can be achieved for cosmetic application by changing the aqueous phase composition.

실리카 입자의 표면이 실란올(silanol, SiOH)그룹과 트리메틸실록실$(trimethylsiloxyl,{\;}-OSi(CH_3)_3)$그룹으로 이루어진 양친 매성 고체입자를 이용하여 유중수형(water-in-oil, W/O)의 에멀젼을 제조하는데 있어서, 안정한 에멀젼을 제조하기 위해서 수상에서의 pH, 전해질 화합물, 고분자의 영향을 연구하였다. 에멀젼의 안정성은 실리카의 응집(flocculation) 정도를 조절함으로써 향상시킬 수 있었으며 수상의 pH 조절 및 전해질 화합물 첨가를 통해 에멀젼의 안정성을 증진시킬 수 있었다. $70\%$의 내상을 가지는 W/O 에멀젼을 제조하였을 때, 실리카 입자의 함량이 $1\%$까지 증가함에 따라 에멀젼 입자의 크기는 감소하였으나, 너무 높은 농도의 실리카는 오히려 유상의 점도를 상승시켜 작은 유화입자의 형성을 방해하였다. 제조된 에멀젼의 입자 크기를 이용하여 이론적으로 계산해 볼 때, 많은 양의 실리카 입자가 외상인 유상에 존재함을 알 수 있으며, 에멀젼의 안정성을 증진시키기 위해서는 실리카 입자를 계면에 위치하도록 하는 것이 보다 중요함을 알 수 있다. 내상인 수상부에 전해질 화합물을 첨가하지 않은 상태에서 내상의 pH가 증가할수록 실리카 입자의 (-)전하가 증가하여 입자간 응집 촉진에 의해 에멀젼의 안정성이 증가하였다. 산성 및 중성 pH에서 전해질 $화합물(0.083\;mol\;dm^{-3}\;MgSO_4)$의 첨가는 에멀전의 안정성을 증가시킨 반면, 알칼리성 pH에서 전해질 화합물의 첨가는 에멀젼의 안정성을 저하시켰다. 레오미터를 이용하여 에멀젼의 물성 변화를 관찰한 결과, 전해질 화합물 첨가시 내상인 수상의 pH에 관계없이 산성 및 알칼리성에서 모두 에멀젼의 탄성이 급격히 증가하였다. 이는 수상의 pH가 알칼리성인 경우 더욱 현저하였음을 볼 때, 알칼리에 의해 더욱 음전하를 띄게 된 실리카 입자와 전해질 화합물의 양이온간의 전기적 결합에 의한 것으로 사료된다. 수용성 고분자인 잔탄검의 첨가에 의해 에멀젼 입자의 평균 입자 크기가 약 2.8 um인 안정한 에멀전을 제조할 수 있었다. 이상의 연구를 통하여 계면활성제를 함유하지 않는 고내상의 안정한 W/O 에멀젼을 제조하여 보다 피부에 안전한 유화물의 제조가 가능하였다.

Keywords

References

  1. S. Abend, N. Bonnke, U. Gutsshner, and G. Lagaly, Stabilization of emulsions by heterocoagulation of clay minerals and layered double hydroxides, Colloid Polym. Sci., 276, 730 (1998)
  2. J. Thieme, S. Abend, and G. Lagaly, Aggregation in pickering emulsions, Colloid Polym Sci., 277, 257 (1999)
  3. B. P. Binks and S. O. Lumsdon, Pickering emulsions stabilized by monodisperse latex particles: Effects of particle size, Langmuir, 17, 4540 (2001)
  4. S. Levine, D. Boeden, and S. J. Partridge, Stabilization of emulsions by fine particles I. Partitioning of particles between continuous phase and oil/water interface. Colloid and Surfaces A., 38, 325 (1989)
  5. H. Hassender, B. Johansson, and B. Tornell, The mechanism of emulsion stabilization by small silica (Ludox) particles, Colloid and Surfaces A., 40, 93 (1989)
  6. D. E. Tambe and M. M. Sharma, Factors controlling the stability of colloid-stabilized emulsions, J. Colloid Interface Sci., 157, 244 (1993)
  7. B. P. Binks and S. O. Lumsdon, Stability of oil-in-water emulsions stabilized by silica particles, Phys. Chem. Chem. Phys., 1, 3007 (1999)
  8. B. R. Midmore, Preparation of a novel silicastabilized oil/water emulsion, Colloid and Surfaces A., 132, 257 (1998)
  9. B. P. Binks and S. O. Lumsdon, Catastrophic phase inversion of water-in-oil emulsions stabilized by hydrophobic silica, Langmuir, 16, 2539 (2000)
  10. B. P. Binks and S. O. Lumsdon, Influence of particle wettability on the type and stability of surfactant-free emulsions, Langmuir, 16, 8622 (2000)
  11. B. P. Binks and John, H. Clint, Solid wettability from surface energy components: Relevance to Pickering emulsions, Langmuir, 18, 1270 (2002)
  12. B. P. Binks and S. O. Lumsdon, Transitional phase inversion of solid-stabilised emulsions using particle mixtures, Langmuir, 16, 3748 (2000)
  13. B. P. Binks and S. O. Lumsdon, Stabilization of emulsions by heterocoagulation of clay minerals and layered double hydroxide, Colloid Polym. Sci., 276, 730 (1998)
  14. B. P. Binks and S. O. Lumsdon, Effect of oil type and aqueous phase composition on oil-water mixtures containing particles of intermediate hydrophobicity, Phys. Chem. Phys., 2, 2959 (2000).
  15. B. R. Midmore, Effect of aqueous phase composition on the properties of a silica-stabilised w/o emulsion, J. Colloid Interface Sci., 213, 352 (1999)
  16. O. Mengual, G. Meunier, I. Cayre, K. Puech, and P. Snabre, Characterisation of instability of concentrated dispersion by a new optical analyzer: the Turbiscan Ma 1000, Physicochemical and Engineering Aspects, 152, 111 (1999)
  17. B. Abismail, J. P. Canselier, A. M. Wilhem, H. Delmas, and C. Gourdon, Emulsification processe; on-line study by multiple light scattering measurements, Ultrasonics Sonochemistry, 7, 187 (2000)