Journal of the Korean Society of Industry Convergence (한국산업융합학회 논문집)
- Volume 7 Issue 1
- /
- Pages.55-62
- /
- 2004
- /
- 1226-833X(pISSN)
- /
- 2765-5415(eISSN)
The effects of cutting parameters on the characteristics of mist generation in turning
선삭시 미스트 발생특성에 미치는 절삭변수의 영향
- Oh, Myung-Seok (Deft. of Mechanical Engineering of Yeungnam College of Science & Technology)
- 오명석 (영남이공대학 기계과)
- Received : 2003.10.08
- Accepted : 2004.02.20
- Published : 2004.02.28
Abstract
The presence of cutting fluid for cutting tool and workpiece leads a temperature decrease, and reduces tool wear and residual stress. Moreover, it disposes chips from cutting area, and reduces thermal distortion. However, in manufacturing, cutting fluid used in cutting process is undesirable for both human and environmental aspect. Also, it's not economic for cutting cost. This paper studied experimentally the effects of cutting parameters on the characteristics of mist generation in turning. The results of experiment are as follows: 1) The more severe cutting conditions the more mist generate, 2) The ratio of weight concentrations of cutting fluid nearly have no an effect on the amounts of mist generation 3) The size of SMD is not affected by cutting parameters.