참고문헌
- Taviss, D. P., Rohsenow, W. M., and Ba-ron, A. B., Forced Convection Condensation inside Tubes: A Heat Transfer Equation for Condenser Design, ASHRAE Trans., 1972, Vol. 79, pp.157-165
- Cavallini, A., and Zecchin, R., A Dimen-sionless Correlation for Heat Transfer in Forced Convection Condensation, Proc. 5th Int. Heat Transfer Conf., 1974, Vol. 79, pp. 309-31
- Shah, M. M., A General Correlation for Heat Transfer during Film Condensation inside Pipes, Int. J. Heat Mass Transfer, 1979, Vol. 22, pp. 547-556 https://doi.org/10.1016/0017-9310(79)90058-9
- Sato, Y. and Takahashi, T., An Expeh-mental Study of Condensation Heat Transfer of Refrigerant HCFC-22 in Aluminum Extruded Flat Tubes, JSME, 1994, No. 940-24
- Yang, C. Y., A Theoretical and Expehmental Study of Condensation in Flat Extruded Micro-fin Tubes, Ph. D. Thesis, Pennsylvania State Univ., 1994
- Lockhard, R. W., and Martinelli, R. C., Pro-posed Correlation of Data for Isothermal Two-Phase Two-Component Flow in Pipes, Chem. Eng. Prog, 1949. 45(1), pp. 39-48
- Chisholm, D., A Theoretical Basis for the Lockhart Martinelli Correlation for Two-Phase Flow. Int. J. Heat and Mass Trans., 1967, 10, 1767-1778 https://doi.org/10.1016/0017-9310(67)90047-6
- Friedel, L., Improved Fhction Pressure Drop Correlation for Horizontal and Vertical Two-Phase Pipe Flow, Eropian Two-Phase Flow Group Meeting, Isora, Italy, Paper E2, 1979
- Davenport, C. J., Correlations for Heat Tra-nsfer and Flow Friction Characteristics of Louvered Fin, Transactions of the ASME, 1983, pp.19-27
- Sahnoun. A. and Webb, R. L., Prediction of Heat Transfer and Friction for Louver Fin Geometry, Transaction of the AHME, 1992, Vol. 114, pp. 893-900 https://doi.org/10.1115/1.2911898
- Dillen, E. R., and Webb, R. L,, Rationally Based Heat Transfer and Fhction Correlations for the Louver Fin Geometry, Society of Automotive Engineers, Paper 940504, SAE International Congress. Detroit, MI, 1994, pp.1-8
- Webb, R. L., Chang, Y, J. and Wang, C. C., Heat Transfer and Friction Correlation's fort he Louver Fin Geometry, IMechE, 1995, Vol. C496/081, pp. 533-541
- Dittus, F. W., and Boelter, L. M .K., University of California Publications on Engineering, Berkely, 1930, Vol. 2, pp. 443
- Paliwoda, A., Generalized Method of Press-ure Drop and Tube Length Calculation with Boiling and Condensing Refrigerants within the Entire Zone of Saturation, Int. J. Refrig., 1989, 12, 314-322 https://doi.org/10.1016/0140-7007(89)90062-5
- Zivi, S. M., Estimation of Steady State Ste-am Void-Fraction by Means of Principle of Minimum Entropy Production, Trans ASME, 1964, Series C, 86, pp. 237-252
- Kays, W. M. and London, A. L., Compact Heat Exchanger, McGraw-Hill, 3rd ed. 1984