DOI QR코드

DOI QR Code

Experimental study on concrete filled square hollow sections

  • Lam, Dennis (School of Civil Engineering, University of Leeds) ;
  • Williams, Christopher A. (Arup, Admiral House)
  • 투고 : 2003.10.13
  • 심사 : 2004.02.10
  • 발행 : 2004.04.25

초록

A series of tests was performed to consider the behaviour of short composite columns under axial compressive loading, covering a range of S275 and S355 grade steel square hollow section filled with normal and high strength concrete. The interaction between the steel and the concrete component is considered and the results show that concrete shrinkage has an effect on the axial strength of the column. Comparisons between Eurocode 4, ACI-318 and the Australian Standards with the findings of this research were made. Result showed the equation used by the ACI-318 and the proposed Australian Standards gave better predication for the axial capacity of concrete filled SHS columns than the Eurocode 4.

키워드

참고문헌

  1. ACI Committee 318, Building code requirements for structural concrete (ACI 318-95), (1995), American Concrete Institute, Detroit.
  2. Australia Standards AS3600 (1994), Reinforced Concrete Structures, Standards Australia, Sydney.
  3. Australia Standards AS4100 (1998), Steel Structures, Standards Australia, Sydney.
  4. Eurocode 4 (1994), DD ENV 1994-1-1, "Design of composite steel and concrete structures. Part 1.1, General rules and rules for buildings (with U.K National Application Document)", British Standards Institution, London.
  5. Garder, J. and Jacobson, R. (1967), "Structural behaviour of concrete filled steel tubes", ACI, 65, 404-413.
  6. Gibbons, C. and Scott, D. (1996), "Composite hollow steel tubular columns filled with high strength concrete", Proc. Int. Conf. on Advances in Steel Structures, Hong Kong, 467-476.
  7. Guiaux, P. and Janss, J. (1970), "Buckling behaviour of columns made with steel tubes and filled with concrete", CIDECT, Issue 70/42/E: No MT65.
  8. Hajjar, J.F. and Gourley, B.C. (1996), "Representation of concrete filled steel tube cross-section strength", J. Struct. Eng., ASCE, 122(11), 1327-1336. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:11(1327)
  9. Kato, B. (1996), "Column curves of steel-concrete composite members", J. Structural Steel Research, 39(2), 121-135. https://doi.org/10.1016/S0143-974X(96)00030-2
  10. Kilpatrick, A.E. and Rangan, B.V. (1997), "Tests on high strength composite concrete columns", Research Report No 1/97, Sch. of Civil Eng, Uni. of tech, Western Australia.
  11. Knowles, R.B. and Park, R. (1969), "Strength of concrete filled steel tubular columns", J. Struct. Div., ASCE, 95(ST12), 2565-2587.
  12. Lahlou, K. and Aitcin, P.C. (1997), "High performance concrete columns confined in thin steel casings", Bulletin Des Laboratories Des Ponts Et Chaussees, 209, 49-67 (In French).
  13. Lundberg, J.E. (1993), "The reliability of composite columns and beam-columns", Structural Engineering Report: No93-2: Department of Civil Engineering: Uni of Minnesota.
  14. Neogi, P.K., San, H.K. and Chapman, J.C. (1969), "Concrete filled tubular steel columns under eccentric loading", J. Struct. Eng., ASCE, 47(5), 187-195.
  15. Prion, H.G.L and Boehme, J. (1989), "Beam-column behaviour of steel tubes filled with high strength concrete", Proc. of the 4th Int. Colloquium, North Americas Session, New York, Structural Stability Research Council, 439-448.
  16. Rangan, B.V. and Joyce, M. (1992), "Strength of eccentrically loaded lender steel tubular columns filled with high strength concrete", ACI Struct J., 89(b), 676-681.
  17. Roeder, C.W., Cameron, B. and Brown, C.B. (1999), "Composite action in concrete filled tubes", J. Struct. Eng., ASCE, 477-484.
  18. Saw, H.S and Liew, J.Y. (2000), "Assessment of current methods for the design of composite columns in buildings", J. Constructional Steel Research, 53(2), 121-147. https://doi.org/10.1016/S0143-974X(99)00062-0
  19. Schneider, S.P. (1998), "Axially loaded concrete filled steel tubes", J. Struct. Eng., ASCE, 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)
  20. Shakir-Khalil, H. and Mouli, M. (1990), "Further tests on concrete filled rectangular hollow section columns", The Structural Engineer, 68(20), 405-413.
  21. Shanmugan, N.E and Lakshmi, B. (2001), "State of the art report on steel-concrete composite columns", J. Constructional Steel Research, 57(1), 1041-1080. https://doi.org/10.1016/S0143-974X(01)00021-9
  22. Uy, B. (1998), "Concrete filled fabricated steel box columns for multi-storey buildings", Progress in Structural Engineering and Material, 1(2), 150-158. https://doi.org/10.1002/pse.2260010207
  23. Uy, B. (2001), "Strength of short concrete filled high strength steel box columns", J. Constructional Steel Research, 57, 113-134. https://doi.org/10.1016/S0143-974X(00)00014-6
  24. Virdi, K.S. and Dowling, P.J. (1973), "The ultimate strength of composite columns in biaxial bending", Proc. Institute of Civil Engineers, Part 32, 55, 251-172. https://doi.org/10.1680/iicep.1973.4958
  25. Wang, Y.C. (1999), "Tests on slender composite columns", J. Constructional Steel Research, 49, 25-41 https://doi.org/10.1016/S0143-974X(98)00202-8

피인용 문헌

  1. Numerical modelling of concrete-filled steel box columns incorporating high strength materials vol.102, 2014, https://doi.org/10.1016/j.jcsr.2014.07.014
  2. Research on axial bearing capacity of rectangular concrete-filled steel tubular columns based on artificial neural networks vol.11, pp.5, 2017, https://doi.org/10.1007/s11704-016-5113-6
  3. Axial strength of circular concrete-filled steel tube columns — DOE approach vol.66, pp.10, 2010, https://doi.org/10.1016/j.jcsr.2010.04.006
  4. Novel Design Procedures for Rectangular Hollow Steel Sections Subject to Compression and Major and Minor Axis Bending vol.20, pp.4, 2015, https://doi.org/10.1061/(ASCE)SC.1943-5576.0000248
  5. Experimental behaviour of square CFST under local bearing forces vol.74, 2014, https://doi.org/10.1016/j.tws.2013.09.022
  6. 08.47: Experimental study of cross-section shape and infill influence on CFST stub columns subjected to axial load vol.1, pp.2-3, 2017, https://doi.org/10.1002/cepa.268
  7. Structural design of stainless steel concrete filled columns vol.64, pp.11, 2008, https://doi.org/10.1016/j.jcsr.2008.04.012
  8. Using fibres and fly ash in concrete-filled steel tube columns vol.169, pp.10, 2016, https://doi.org/10.1680/jstbu.15.00130
  9. 08.15: Axial behaviour of concrete filled lean duplex stainless steel square hollow sections vol.1, pp.2-3, 2017, https://doi.org/10.1002/cepa.240
  10. Dune sand concrete-filled steel tubular (CFST) stub columns under axial compression: Experiments vol.124, 2018, https://doi.org/10.1016/j.tws.2017.12.006
  11. Experimental behavior and design method of rectangular concrete-filled tubular columns using Q460 high-strength steel vol.125, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.057
  12. Reliability-based assessment of American and European specifications for square CFT stub columns vol.19, pp.4, 2015, https://doi.org/10.12989/scs.2015.19.4.811
  13. An experimental study on elliptical concrete filled columns under axial compression vol.87, 2013, https://doi.org/10.1016/j.jcsr.2013.04.002
  14. Finite element modelling of concrete-filled steel stub columns under axial compression vol.89, 2013, https://doi.org/10.1016/j.jcsr.2013.07.001
  15. Experiments on special-shaped CFST stub columns under axial compression vol.98, 2014, https://doi.org/10.1016/j.jcsr.2014.03.002
  16. Nonlinear analysis of concrete-filled steel SHS and RHS columns vol.44, pp.8, 2006, https://doi.org/10.1016/j.tws.2006.07.005
  17. Testing and analysis of concrete-filled elliptical hollow sections vol.30, pp.12, 2008, https://doi.org/10.1016/j.engstruct.2008.07.004
  18. Nonlinear behavior of concrete-filled stainless steel stiffened slender tube columns vol.45, pp.3, 2007, https://doi.org/10.1016/j.tws.2007.02.011
  19. A Strength Model for Square CFT Stub Columns with Compact Sections vol.94-96, pp.1662-7482, 2011, https://doi.org/10.4028/www.scientific.net/AMM.94-96.425
  20. Experimental evaluation on the seismic performance of high strength thin-walled composite members accounting for sectional aspect ratio effect vol.9, pp.4, 2004, https://doi.org/10.12989/scs.2009.9.4.367
  21. Axial compressive behaviour of stub concrete-filled columns with elliptical stainless steel hollow sections vol.10, pp.6, 2004, https://doi.org/10.12989/scs.2010.10.6.517
  22. Stability study on tenon-connected SHS and CFST columns in modular construction vol.30, pp.2, 2004, https://doi.org/10.12989/scs.2019.30.2.185
  23. Experimental and analytical investigation of composite columns made of high strength steel and high strength concrete vol.33, pp.1, 2019, https://doi.org/10.12989/scs.2019.33.1.067
  24. Numerical study of concrete-encased CFST under preload followed by sustained service load vol.35, pp.1, 2004, https://doi.org/10.12989/scs.2020.35.1.093
  25. Experimental study on steel-concrete composite beams with Uplift-restricted and slip-permitted screw-type (URSP-S) connectors vol.35, pp.2, 2004, https://doi.org/10.12989/scs.2020.35.2.261
  26. A Novel Hybrid Model Based on a Feedforward Neural Network and One Step Secant Algorithm for Prediction of Load-Bearing Capacity of Rectangular Concrete-Filled Steel Tube Columns vol.25, pp.15, 2004, https://doi.org/10.3390/molecules25153486
  27. Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading vol.36, pp.5, 2004, https://doi.org/10.12989/scs.2020.36.5.587
  28. Design of square and rectangular CFST cross-sectional capacities in compression vol.176, pp.None, 2004, https://doi.org/10.1016/j.jcsr.2020.106419
  29. The effects of cross-sectional shapes on the axial performance of concrete-filled steel tube columns vol.176, pp.None, 2021, https://doi.org/10.1016/j.jcsr.2020.106424
  30. Effect of steel tube thickness on the behaviour of CFST columns: Experimental tests and design assessment vol.230, pp.None, 2004, https://doi.org/10.1016/j.engstruct.2020.111687
  31. Experimental Study of Square Concrete-Filled Welded Cold-Formed Steel Columns Under Concentric Loading vol.46, pp.5, 2004, https://doi.org/10.1007/s13369-020-04797-9
  32. Simplified Nonlinear Simulation of Rectangular Concrete-Filled Steel Tubular Columns vol.147, pp.6, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0003021
  33. Evaluation of the ultimate eccentric load of rectangular CFSTs using advanced neural network modeling vol.248, pp.None, 2004, https://doi.org/10.1016/j.engstruct.2021.113297
  34. Performance and strength calculation of CFST columns with localized pitting corrosion damage vol.188, pp.None, 2004, https://doi.org/10.1016/j.jcsr.2021.107011