DOI QR코드

DOI QR Code

Reliability analysis of latticed steel towers against wind induced displacement

  • Khan, M.A. (Department of Civil Engineering, Aligarh Muslim University) ;
  • Siddiqui, N.A. (Department of Civil Engineering, Aligarh Muslim University) ;
  • Abbas, H. (Department of Civil Engineering, Aligarh Muslim University)
  • 투고 : 2002.10.11
  • 심사 : 2004.02.10
  • 발행 : 2004.02.25

초록

The present study aims at the reliability analysis of steel towers against the limit state of deflection. For this purpose tip deflection of the tower has been obtained after carrying out the dynamic analysis of the tower using modal method. This tip deflection is employed for subsequent reliability analysis. A limit state function based on serviceability criterion of deflection is derived in terms of random variables. A complete procedure of reliability computation is then presented. To study the influence of various random variables on tower reliability, sensitivity analysis has been carried out. Design points, important for probabilistic design of towers, are also located on the failure surface. Some parametric studies have also been included to obtain the results of academic and field interest.

키워드

참고문헌

  1. Agarawal, S.K. and Garg, R.K. (1994), "Wind load assessment on free standing lattice towers", J. the Institution of Engineers, India, 75, 171-177.
  2. Ahmad, M.B., Pande, P.K. and Krishna, P. (1984), "Self supporting towers under wind loads", J. Struct. Eng., ASCE, 110(2), 370-384. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:2(370)
  3. Amanullah, M., Siddiqui, N.A., Umar, A. and Abbas, H. (2002). "Fatigue reliability analysis of welded joints of a TLP tether system." Steel and Composite Structures, An Int. J., 2(5), 331-354. https://doi.org/10.12989/scs.2002.2.5.331
  4. AS: 3995-1994. Australian Standard for Design of Steel Lattice Towers and Masts. Standards Australia, North Sydney, Australia, 1994.
  5. Choudhury, M.A., Siddiqui, N.A. and Abbas, H. (2002). "Reliability analysis of buried concrete target under missile impact", Int. J. Impact Eng., 27(8), 791-806. https://doi.org/10.1016/S0734-743X(02)00025-8
  6. Davenport, A.G. and Sparling, B.F. (1992), "Dynamic gust response factors for guyed towers", J. Wind Eng. & Ind. Aerodyn., 41-44, 2237-2248.
  7. Deoliya, R. and Datta, T.K. (1998), "Reliability of microwave towers against extreme winds", Struct. Eng. Mech., An Int. J., Techno-Press, 6(5), 555-569. https://doi.org/10.12989/sem.1998.6.5.555
  8. Deoliya, R. and Datta, T.K. (2000), "Reliability analysis of a microwave tower for fluctuating mean wind with directional effect." Reliability Engineering and System Safety, 67, 257-267. https://doi.org/10.1016/S0951-8320(99)00053-8
  9. Dharaneepathy, M.V. and Keshavarao, N.N. (1987), "Spectral analysis of communication tower response to wind spectra." J. Struct. Eng., SERC, India, 14, 2.
  10. EIA/TIA-222-E. Structural Standards for Steel Antenna Towers and Antenna Supporting Structures. American National Standard, USA, 1991.
  11. Harikrishna, P., Shanmugasundaram, J., Gomathinayagam, S. and Lakshmanan, N. (1999). "Analytical and experimental studies on the gust response of a 52 m tall steel lattice tower under wind loading", Comput. Struct., 70(2), 149-160. https://doi.org/10.1016/S0045-7949(98)00156-4
  12. Holmes, J. D. (1994a), "Along wind response of lattice towers: Part I- Deviation of expressions for gust response factors", Eng. Struct., 16(4), 287-292. https://doi.org/10.1016/0141-0296(94)90069-8
  13. Holmes, J. D. (1994b). "Along wind response of lattice towers: Part III- Deviation of expressions for gust response factors." Eng. Struct., 18(7), 489-494.
  14. Madsen, H.O., Krenk, S. and Lind, N.C. (1986), Methods of Structural Safety. Engle wood cliffs, NJ: Prentice- Hall.
  15. Masood, A., Ahmad, S., Ahmad, M.B. and Khan, M.A. (1995), "Analysis and design of tall slender latticed steel tower under wind effect", Proc., National Seminar on High rise structures, XIth National Convention of Civil Engineers, The Institution of Engineers, India, November 1995, VIII, 28-37.
  16. Menon, D. and Rao, P.S. (1998), "Reliability of wind-resistant design of tubular concrete towers", J. Struct. Eng., Structural Engineering Research Centre (SERC), India, 25(4), 21-29.
  17. Siddiqui, N.A. and Ahmad, S. (2000), "Reliability analysis against progressive failure of TLP tethers in extreme tension", Reliability Engineering and System Safety, 68(3), 195-205. https://doi.org/10.1016/S0951-8320(00)00008-9
  18. Siddiqui, N.A. and Ahmad, S. (2001), "Fatigue and fracture reliability of TLP tethers under random loading." Marine Struct., 14, 331-352. https://doi.org/10.1016/S0951-8339(01)00005-3
  19. Siddiqui, N.A., Choudhury, M.A. and Abbas, H. (2002), "Reliability analysis of projectile penetration into a buried concrete target." Reliability Engineering and System Safety, 78(1), 13-19. https://doi.org/10.1016/S0951-8320(02)00050-9

피인용 문헌

  1. Fracture prediction of welded steel connections using traditional fracture mechanics and calibrated micromechanics based models vol.11, pp.3, 2011, https://doi.org/10.1007/s13296-011-3010-2
  2. Fracture behavior analyses of welded beam-to-column connections based on elastic and inelastic fracture mechanics vol.10, pp.3, 2010, https://doi.org/10.1007/BF03215835