DOI QR코드

DOI QR Code

Finite element modeling of slab-on-beam concrete bridge superstructures

  • Patrick, Michael D. (Department of Civil and Environmental Engineering, Tennessee Technological University) ;
  • Huo, X. Sharon (Department of Civil and Environmental Engineering, Tennessee Technological University)
  • 발행 : 2004.08.25

초록

This paper presents a study of four finite element techniques that can be used to model slabon-beam highway bridges. The feasibility and correctness of each modeling technique are examined by applying them to a prestressed concrete I-beam bridge and a prestressed concrete box-beam bridge. Other issues related to bridge modeling such as torsional constant, support conditions, and quality control check are studied in detail and discussed in the paper. It is found that, under truck loading, the bending stress distribution in a beam section depends on the modeling technique being utilized. It is observed that the behavior of the bridge superstructure can be better represented when accounting for composite behavior between the supporting beams and slab.

키워드

참고문헌

  1. Abendroth, R. E., Klaiber, R.W. and Shafer, M.W. (1995), "Diaphragm effectiveness in prestressed-concrete beam bridges", J.Bridge Eng., 121(9), 1362-1369.
  2. American Association of State Highway and Transportation Officials (AASHTO) (1994), AASHTO LRFD Bridge Design Specifications, 1st Ed. Washington, D.C.
  3. American Association of State Highway and Transportation Officials (AASHTO) (1996), Standard Specifications for Highway Bridges, 16th Ed. Washington, D.C.
  4. ANSYS documentation version 6.1 (2002), ANSYS Inc.
  5. Barker, R. M. and Puckett, J. A. (1997), Design of Highway Bridges: based on AASHTO LRFD bridge design specification, John Wiley, New York.
  6. Barr, P. J., Eberhard, M. O., and Stanton, J. F. (2001), "Live-load distribution factors in prestressed concrete girder bridges", J.Bridge Eng., 6(5), 298-306. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:5(298)
  7. Chen, Y. (1995), "Refined and simplified methods of lateral load distribution for bridges with unequally spaced girders: I. Theory", Comput. Struct., 55(1) 1-15.
  8. Chen, Y. (1999), "Distribution of vehicular loads on bridge girders by the FEA using ADINA: modeling, simulation, and comparison", Comput. Struct., 72(1-3), 127-139. https://doi.org/10.1016/S0045-7949(99)00032-2
  9. Chen, Y. and Aswad, A. (1996), "Stretching span capability of prestressed concrete bridges under AASHTO LRFD", J.Bridge Eng., 1(3), 112-120. https://doi.org/10.1061/(ASCE)1084-0702(1996)1:3(112)
  10. Eom, J. and Nowak, A. S. (2001), "Live-load distribution for steel beam bridges", J. Bridge Eng., 6(6), 489-497. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(489)
  11. Mabsout, M. E., Tarhini, K. M., Frederick, G. R. and Tayar, C. (1997), "Finite-element analysis of steel beam highway bridge", J.Bridge Eng., 2(3), 83-87. https://doi.org/10.1061/(ASCE)1084-0702(1997)2:3(83)
  12. Sanders, W. W. Jr, and Elleby, H. A. (1970), "Distribution of wheel loads on highway bridges", National Cooperative Highway Research Program Report No. 83, Transportation Research Board, Washington, D.C.
  13. SAP 2000 Analysis Reference Manual (2002), Computers and Structures, Inc.
  14. Sengupta, A. and Breen, J. E. (1973), "The effect of diaphragms in prestressed concrete girder and slab bridges", Res. Report 158-1F, Project 3-5-71-158, Center for Highway Res. Univ. of Texas at Austin, TX.
  15. Shahawy, M. and Huang, D. (2001) "Analytical and field investigation of lateral load distribution in concrete slab-on-girder bridges", ACI Struct. J., 98(4), 590-599.

피인용 문헌

  1. A method for effective beam widths of slabs in flat plate structures under gravity and lateral loads vol.21, pp.4, 2005, https://doi.org/10.12989/sem.2005.21.4.451
  2. A 3D finite element model for reinforced concrete structures analysis vol.4, pp.4, 2011, https://doi.org/10.1590/S1983-41952011000400002
  3. Evaluation of multi-lane transverse reduction factor under random vehicle load vol.19, pp.6, 2017, https://doi.org/10.12989/cac.2017.19.6.725