DOI QR코드

DOI QR Code

Experiment study of structural random loading identification by the inverse pseudo excitation method

  • Guo, Xing-Lin (Department of Engineering Mechanics, Dalian University of Technology) ;
  • Li, Dong-Sheng (Department of Engineering Mechanics, Dalian University of Technology)
  • 투고 : 2004.05.11
  • 심사 : 2004.07.13
  • 발행 : 2004.12.25

초록

The inverse pseudo excitation method is used in the identification of random loadings. For structures subjected to stationary random excitations, the power spectral density matrices of such loadings are identified experimentally. The identification is based on the measured acceleration responses and the structural frequency response functions. Numerical simulation is used in the optimal selection of sensor locations. The proposed method has been successfully applied to the loading identification experiments of three structural models, two uniform steel cantilever beams and a four-story plastic glass frame, subjected to uncorrelated or partially correlated random excitations. The identified loadings agree quite well with actual excitations. It is proved that the proposed method is quite accurate and efficient in addition to its ability to alleviate the ill conditioning of the structural frequency response functions.

키워드

참고문헌

  1. Adams, Robert and Doyle, James F. (2002), "Multiple force identification for complex structures", Experimental Mechanics, 42(1), 25-36. https://doi.org/10.1007/BF02411048
  2. Avitabile, P. and Chandler, D. (2001), "Selection of measurement references using the TRIP method", Proc. of 19th Int. Modal Analysis Conf., Florida, U.S.A.
  3. Barlett, F.D. and Flannelly, W.G. (1979), "Modal verification of force determination for measuring vibratory loads", J. of the American Helicopter Society, 19(4), 10-18.
  4. Bendat, J.S. and Piersol, A.G. (2000), Random Data: Analysis and Measurement Procedures, John Wiley & Sons, Inc., New York.
  5. Callahan, O.J. and Piergentili, F. (1994), "Force estimation using operational data", Proc. of 8th Int. Modal Analysis Conf., 1586-1592.
  6. Desanghere, G. and Snoeys, R. (1985), "Indirect identification of excitation forces by modal coordinate transformation", Proc. of 3rd Int. Modal Analysis Conf., 685-690, Florida, U.S.A.
  7. Dobson, B.J. and Rider, E. (1990), "A review of the indirect calculation of excitation forces from measured structural response data", J. Mech. Eng. Sci. : Part C, 204, 69-75. https://doi.org/10.1243/PIME_PROC_1990_204_080_02
  8. Ewins, D.J. (1984), Modal Testing: Theory and Practice, Research Studies Press Ltd., London.
  9. Giansante, N., Jones, R. and Galapodas, N.J. (1982), "Determination of in-flight helicopter loads", J. of the American Helicopter Society, 27(3), 58-64. https://doi.org/10.4050/JAHS.27.58
  10. Golub, G.H. and Van Load, C.F. (1996), Matrix Computation, The Johns Hopkins University Press.
  11. Hillary, B. and Ewins, D.J. (1984), "The use of strain gages in force determination and frequency response measurements", Proc. of 2nd Int. Modal Analysis Conf., 627-634, Florida, U.S.A.
  12. Juang, J.N. (1994), Applied System Identification, PTR Prentice-Hall, Inc., New Jersey.
  13. Karl, S.K. (1987), "Force identification problems-An overview", Proc. of the 1987 Society of Experimental Mechanics Spring Conf. on Experimental Mechanics, 838-844, Florida, U.S.A.
  14. Li, D.S. and Guo, X.L. (2003), "Loading identification of random excitations", Proc. of 21th Int. Modal Analysis Conf., Florida, U.S.A.
  15. Lin, J.H. (1992), "A fast CQC algorithm of PSD matrices for random seismic responses", Comput. Struct., 44, 683-687. https://doi.org/10.1016/0045-7949(92)90401-K
  16. Lin, J.H., Zhang, W.S. and Li, J.J. (1994), "Structural responses to arbitrarily coherent stationary random excitations", Comput. Struct., 50(5), 629-633. https://doi.org/10.1016/0045-7949(94)90422-7
  17. Lin, J.H., Guo, X.L., Zhi, H., Howson, W.P. and Williams, F.W. (2001), "Computer simulation of structural random loading identification", Comput. Struct., 79, 375-387. https://doi.org/10.1016/S0045-7949(00)00154-1
  18. Newland, N.E. (1984), An Introduction to Random Vibration and Spectral Analysis, Longman, London.
  19. Okubo, N., Tanabe, S. and Tatsuno, T. (1985), "Identification of forces generated by a machine under operation condition", Proc. of 3rd Int. Modal Analysis Conf., 920-927, Florida, U.S.A.
  20. Zhu, X.Q. and Law, S.S. (2002), "Moving loads identification through regularization", J. Eng. Mech., 128(9), 989-1001. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:9(989)

피인용 문헌

  1. Accurate measurement of micromachining forces through dynamic compensation of dynamometers vol.49, 2017, https://doi.org/10.1016/j.precisioneng.2017.03.006
  2. Identification of high frequency loads using statistical energy analysis method vol.35, pp.1-2, 2013, https://doi.org/10.1016/j.ymssp.2012.08.028
  3. EXPERIMENTAL STUDY OF HAMMER IMPACT IDENTIFICATION ON A STEEL CANTILEVER BEAM vol.34, pp.3, 2009, https://doi.org/10.1111/j.1747-1567.2009.00530.x
  4. A state space force identification method based on Markov parameters precise computation and regularization technique vol.329, pp.15, 2010, https://doi.org/10.1016/j.jsv.2010.02.012
  5. An Updated Comparison of the Force Reconstruction Methods vol.347, pp.1662-9795, 2007, https://doi.org/10.4028/www.scientific.net/KEM.347.461
  6. On Optimal Sensor Placement Criterion for Structural Health Monitoring with Representative Least Squares Method vol.413-414, pp.1662-9795, 2009, https://doi.org/10.4028/www.scientific.net/KEM.413-414.383
  7. Experimental Study of a Multipoint Random Dynamic Loading Identification Method Based on Weighted Average Technique vol.2019, pp.None, 2004, https://doi.org/10.1155/2019/7368095