DOI QR코드

DOI QR Code

Numerically integrated modified virtual crack closure integral technique for 2-D crack problems

  • Palani, G.S. (Structural Engineering Research Centre, CSIR Campus) ;
  • Dattaguru, B. (Indian Institute of Science) ;
  • Iyer, Nagesh R. (Structural Engineering Research Centre, CSIR Campus)
  • 투고 : 2003.12.05
  • 심사 : 2004.08.03
  • 발행 : 2004.12.25

초록

Modified virtual crack closure integral (MVCCI) technique has become very popular for computation of strain energy release rate (SERR) and stress intensity factor (SIF) for 2-D crack problems. The objective of this paper is to propose a numerical integration procedure for MVCCI so as to generalize the technique and make its application much wider. This new procedure called as numerically integrated MVCCI (NI-MVCCI) will remove the dependence of MVCCI equations on the type of finite element employed in the basic stress analysis. Numerical studies on fracture analysis of 2-D crack (mode I and II) problems have been conducted by employing 4-noded, 8-noded (regular & quarter-point), 9-noded and 12-noded finite elements. For non-singular (regular) elements at crack tip, NI-MVCCI technique generates the same results as MVCCI, but the advantage for higher order regular and singular elements is that complex equations for MVCCI need not be derived. Gauss numerical integration rule to be employed for 8-noded singular (quarter-point) element for accurate computation of SERR and SIF has been recommended based on the numerical studies.

키워드

참고문헌

  1. Badari Narayana, K. (1991), "A general procedure for evaluation of crack closure integral in problems of fracture mechanics", Ph.D. Thesis, Indian Institute of Science, Bangalore, India.
  2. Badari Narayana, K. and Dattaguru, B. (1996), "Certain aspects related to computation by modified crack closure integral", Engg. Fract. Mech., 55, 335-339. https://doi.org/10.1016/0013-7944(96)00017-3
  3. Badari Narayana, K., Dattaguru, B., Ramamurthy, T.S. and Vijayakumar, K. (1990), "Modified crack closure integral using 6-noded isoparametric quadrilateral singular element", Engg. Fract. Mech., 36, 945-955. https://doi.org/10.1016/0013-7944(90)90270-Q
  4. Barsoum, R.S. (1976), "On the use of isoparametric finite elements in linear fracture mechanics", Int. J. Num. Meth. Engg., 10, 25-37. https://doi.org/10.1002/nme.1620100103
  5. Buchholz, F.G. (1984), "Improved formulae for the FE-calculation of the strain energy release rate by the modified crack closure integral method", Proc. 4th World Congress and Exhibition in FEM, Interlaken, 650- 659.
  6. Buchholz, F.G., Chergui, A. and Richard, H.A. (2001), "Computational fracture analysis by the MVCCI method regarding 3-D and mode coupling effects for different specimens and loading conditions", Proc. 6th Int. Conf. Biaxial/Multiaxial Fatigue and Fracture, M. De Freitas (Ed.), Portugal, 991-998.
  7. Cotterell, B. (2002), "The past, present and future of fracture mechanics", Engg. Fract. Mech., 69, 533-553. https://doi.org/10.1016/S0013-7944(01)00101-1
  8. Dhondt, G., Chergui, A. and Buchholz, F.G. (2001), "Computational fracture analysis of different specimens regarding 3-D and mode coupling effects", Engg. Fract. Mech., 68, 383-401. https://doi.org/10.1016/S0013-7944(00)00104-1
  9. Irwin, G.R. (1958), "Fracture", Handbook Phys., 6, 551-590.
  10. Liebowitz, H. and Moyer, E.T. (1989), "Finite element method in fracture mechanics", Comput. Struct., 31, 1-9. https://doi.org/10.1016/0045-7949(89)90160-0
  11. Owen, D.R.J. and Fawkes, A.J. (1982), Engineering Fracture Mechanics: Numerical Methods and Applications, Pine ridge Press Ltd., Swansea, UK.
  12. Raju, I.S. (1986), Simple Formulas for Strain Energy Release Rate with Singular Order and Simple Finite Elements, NASA-CR-178186.
  13. Rooke, D.P. and Cartwright, D.T. (1976), Compendium of Stress Intensity Factors, Her Majesty's Stationery Office, London.
  14. Rybicki, E.F. and Kanninen, M.F. (1977), "A finite element calculation of stress intensity factors by a modified crack closure integral", Engg. Fract. Mech., 9, 931-938. https://doi.org/10.1016/0013-7944(77)90013-3
  15. Schijve, J. (2003), "Fatigue of structures and materials in the 20th century and the state of the art", Int. J. Fatigue, 25, 679-702. https://doi.org/10.1016/S0142-1123(03)00051-3
  16. Young, M.J. and Sun, C.T. (1993), "On the strain energy release rate for a cracked plate subject to out-of-plane bending moment", Int. J. Fract., 60, 227-247. https://doi.org/10.1007/BF00012511
  17. Zienkiewicz, O.C. and Taylor, R.L. (2000), The Finite Element Method, Vol. I: The basis, Vol. II: Solid Mechanics, Butterworth-Hieneman Ltd.

피인용 문헌

  1. New a posteriori error estimator and adaptive mesh refinement strategy for 2-D crack problems vol.73, pp.6, 2006, https://doi.org/10.1016/j.engfracmech.2005.10.003
  2. Simulation and validation of disbond growth in co-cured composite skin–stringer specimens using cohesive elements 2017, https://doi.org/10.1177/0021998317715505