DOI QR코드

DOI QR Code

Bond strength modeling for corroded reinforcement in reinforced concrete

  • Wang, Xiaohui (Department of Civil Engineering, Shanghai Jiaotong University) ;
  • Liu, Xila (Department of Civil Engineering, Shanghai Jiaotong University)
  • 투고 : 2002.10.23
  • 심사 : 2003.12.10
  • 발행 : 2004.06.25

초록

Steel corrosion in reinforced concrete structures leads to concrete cover cracking, reduction of bond strength, and reduction of steel cross section. Among theses consequences mentioned, reduction of bond strength between reinforcement and concrete is of great importance to study the behaviour of RC members with corroded reinforcement. In this paper, firstly, an analytical model based on smeared cracking and average stress-strain relationship of concrete in tension is proposed to evaluate the maximum bursting pressure development in the cover concrete for noncorroded bar. Secondly, the internal pressure caused by the expansion of the corrosion products is evaluated by treating the cracked concrete as an orthotropic material. Finally, bond strength for corroded reinforcing bar is calculated and compared with test results.

키워드

참고문헌

  1. Almusallam, A.A. (2001), "Effect of degree of corrosion on the properties of reinforcing steel bar", Constr. Build. Mater., 15, 361-368.
  2. Al-Sulaimani, G.J., Kaleemullah, M., Basunbul, I.A. and Rasheeduzzafar (1990), "Influence of corrosion and cracking on bond behaviour and strength of reinforced concrete members", ACI Struct. J., 87(2), 220-231.
  3. Amleh, L. and Mirza, S. (1999), "Corrosion influence on bond between steel and concrete", ACI Struct. J., 96(3), 415-423.
  4. Andrade, C., Alonso, C. and Molina, F.J. (1993), "Cover cracking as a function of bar corrosion: Part IExperimental test", Mater. Struct., 26, 453-464. https://doi.org/10.1007/BF02472805
  5. Auyeung, Y., Balaguru, P. and Chung, L. (2000), "Bond behaviour of corroded reinforcement bar", ACI Mater. J., 97(2), 214-221.
  6. Cabrera, J.G. and Ghoddoussi, P. (1992), "The effect of reinforcement corrosion on the strength of the steel/ concrete 'Bond'", Proc. on Int. Conf. "Bond in Concrete", Latvia, 11-24.
  7. Cairns, J. and Abdullah, R.B. (1996), "Bond strength of black and epoxy-coated reinforcement - A theoretical approach", ACI Mater. J., 93(4), 362-369.
  8. Coronelli, D. (2002), "Corrosion cracking and bond strength modeling for corroded bar in reinforced concrete", ACI Struct. J., 99(3), 267-276.
  9. Gambarova, P.G., Rosati, G.P. and Schumm, C. (1994), "An elasto-cohesive model for steel-concrete bond", In Proc. of the Europe-US Workshop on Fracture and Damage in Quasibrittle Structures, Edited by Bazant, Z.P., Bittnar, Z., Jirasek, M. and Mazars, J., Prague, 557-566.
  10. Gambarova, P.G. and Rosati, G.P. (1997), "Bond and splitting in bar pull-out: behavioural laws and concrete cover role", Mag. Concr. Res., 49(179), 99-110. https://doi.org/10.1680/macr.1997.49.179.99
  11. Giuriani, E., Plizzari, G. and Schumm, C. (1991), "Role of stirrups and residual tensile strength of cracked concrete on bond", J. Struct. Eng., 117(1), 1-18. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(1)
  12. Hsu, T.T.C. (1996), "Toward a unified nomenclature for reinforced concrete theory", J. Struct. Eng., 122(3), 275- 283. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(275)
  13. Lundgren, K. (2002), "Modelling the effect of corrosion on bond in reinforced concrete", Mag. Concr. Res., 54(3), 165-173. https://doi.org/10.1680/macr.2002.54.3.165
  14. Mangat, P.S. and Elgarf, M.S. (1999), "Bond characteristics of corroding reinforcement in concrete beams", Mater. Struct., 32, 89-97. https://doi.org/10.1007/BF02479434
  15. Molina, F.J., Alonso, C. and Andrade, C. (1993), "Cover cracking as a function of rebar corrosion: Part 2- Numerical model", Mater. Struct., 26, 532-548. https://doi.org/10.1007/BF02472864
  16. Nielsen, C.V. and Bicanic, N. (2002), "Radial fictitious cracking of thick-walled cylinder due to bar pull-out", Mag. Concr. Res., 54(3), 215-221. https://doi.org/10.1680/macr.2002.54.3.215
  17. Noghabai, K. (1994), "Environmental effects on bond in reinforced concrete structures", Proc. of the 7th Int. Conf. Durability of Building Materials and Components 7 (Volume one), Stockholm, Sweden, 605-614.
  18. Olofsson, T., Noghabai, K., Ohlsson, U. and Elfgren, L. (1995), "Anchorage and bond properties in concrete", Fracture of Brittle, Disordered Material-Concrete, Rock and Ceramics, Edited by. Baker, G., Karihaloo, B.L., UK: E & FN Son, Chapman & Hall, 525-543.
  19. Pantazopoulou, S.J. and Papoulia, K.D. (2001), "Modeling cover-cracking due to reinforcement corrosion in RC structures", J. Eng. Mech., 127(4), 342-351. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:4(342)
  20. Plizzari, G.A., Deldossi, M.A. and Massimo, S. (1998), "Transverse reinforcement effects on anchored deformed bar", Mag. Concr. Res., 50(2), 161-177. https://doi.org/10.1680/macr.1998.50.2.161
  21. Reinhardt, H.W. and Van Der Veen, C. (1992), "Splitting failure of a strain-softening material due to bond stresses", In Applications of Fracture Mechanics to Reinforced Concrete, edited by Elsevier Applied Science Publishers, 333-346.
  22. Stanish, K., Hooton, R.D. and Pantazopoulou, S.J. (1999), "Corrosion effects on bond strength in reinforced concrete", ACI Struct. J., 96(6), 915-922.
  23. Tepfers, R. (1979), "Cracking of concrete cover along anchored deformed reinforcing bar", Mag. Concr. Res., 31(106), 3-12. https://doi.org/10.1680/macr.1979.31.106.3
  24. Zhao, Y.X. and Jin, W.L. (2002), "Test study on bond behavior of corroded steel bar and concrete", China J. of Zhejiang University (Eng Sci), 36(4), 352-356.

피인용 문헌

  1. Four levels to assess anchorage capacity of corroded reinforcement in concrete vol.147, 2017, https://doi.org/10.1016/j.engstruct.2017.06.024
  2. Model for Flexural Strength Calculation of Corroded RC Beams Considering Bond–Slip Behavior vol.142, pp.7, 2016, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001079
  3. Simplified Model for Corrosion-Induced Bond Degradation between Steel Strand and Concrete vol.29, pp.4, 2017, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001784
  4. Bond Degradation–Induced Incompatible Strain between Steel Bars and Concrete in Corroded RC Beams vol.30, pp.6, 2016, https://doi.org/10.1061/(ASCE)CF.1943-5509.0000921
  5. Investigating correlations between crack width, corrosion level and anchorage capacity vol.13, pp.10, 2017, https://doi.org/10.1080/15732479.2016.1263673
  6. Probabilistic bond strength model for reinforcement bar in concrete vol.61, pp.None, 2020, https://doi.org/10.1016/j.probengmech.2020.103079
  7. Bond strength prediction of spliced GFRP bars in concrete beams using soft computing methods vol.27, pp.4, 2004, https://doi.org/10.12989/cac.2021.27.4.305
  8. Seismic fracture analysis of concrete arch dams incorporating the loading rate dependent size effect of concrete vol.79, pp.2, 2021, https://doi.org/10.12989/sem.2021.79.2.169
  9. Theoretical and practical models for shear strength of corroded reinforced concrete columns vol.79, pp.5, 2004, https://doi.org/10.12989/sem.2021.79.5.565