DOI QR코드

DOI QR Code

Behaviour of composite walls under monotonic and cyclic shear loading

  • Hossain, K.M. Anwar (Department of Civil Engineering, Ryerson University) ;
  • Wright, H.D. (Department of Civil Engineering, University of Strathclyde)
  • 투고 : 2003.05.06
  • 심사 : 2003.09.08
  • 발행 : 2004.01.25

초록

The novel form of composite walling system consists of two skins of profiled steel sheeting with an in-fill of concrete. Such walling system can be used as shear elements in steel framed building subjected to lateral load. This paper presents the results of small-scale model tests on composite wall and its components manufactured from very thin sheeting and micro-concrete tested under monotonic and cyclic shear loading conditions. The heavily instrumented small-scale tests provided information on the load-deformation response, strength, stiffness, strain condition, sheet-concrete interaction and failure modes. Analytical models for shear strength and stiffness are derived with some modification factor to take into account the effect of quasi-static cycling loading. The performance of design equations is validated through experimental results.

키워드

참고문헌

  1. ASCE-AASHTO Task Committee (1977), "Curved I-girder bridge design recommendations", J. Struct. Div., ASCE, ST5, 1137-1168.
  2. Bradford, M.A., Wright, H.D. and Uy, B. (1998), "Short and long-term behaviour of axially loaded composite profiled walls", Proc. Institution of Civil Engineers, Structures and Buildings, 128, Feb. 26-37. https://doi.org/10.1680/istbu.1998.30032
  3. British Standard Institutions (1985), BS 8110, Structural Use of Concrete, London.
  4. Davies, J.M. and Fisher, J. (1979), "The diaphragm action of composite slabs", Proc. Institution of Civil Engineers, London, England, 67 (Part2) 891-906. https://doi.org/10.1680/iicep.1979.2780
  5. Easley, J.T. (1975), "Buckling formulas for corrugated metal shear diaphragms", J. Struct. Div,, ASCE, 101(ST7), July, 1403-1417.
  6. Easterling, W.S. and Porter, M.L. (1994a), "Steel-deck-reinforced concrete diaphragms I", J. Struct. Div., ASCE, 120(2), February, 560-576. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:2(560)
  7. Easterling, W.S. and Porter, M.L. (1994b), "Steel-deck-reinforced concrete diaphragms II", J. Struct. Div., ASCE, 120(2), February, 577-596. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:2(577)
  8. Gallocher, S.C. (1993), "The behaviour of composite wall with profiled steel sheeting", PhD Thesis, University of Strathclyde, Glasgow, UK.
  9. Hossain, K.M.A. (2000), "Axial behaviour of pierced profiled composite walls", IPENZ Transaction, 27(1/Civ), 1-7, 2000, New Zealand.
  10. Hossain, K.M.A. and Wright, H.D. (1998a), "Shear interaction between sheeting and concrete in profiled composite construction", Proc. of the Australasian Struct. Eng. Conf., Auckland, 30 Sept.-2 October, 1, 181-188 (ISBN 0-473-05481-7).
  11. Hossain, K.M.A. and Wright, H.D. (1998b), "Performance of profiled concrete shear panels", J. Struct. Eng., ASCE, 124(4), April, 368-381. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(368)
  12. Hossain, K.M.A. and Wright, H.D. (1995), "Composite walling with special reference to the stabilisation of building frames", Proc. Nordic Steel Construction Conf., 531-538, Malmo, Sweden, June 19-21, 1995.
  13. Kupfer, H.B. and Gerstle, K.H. (1973), "Behaviour of concrete under bi-axial stresses", J. Eng. Mech. Div., ASCE, 99, 852-866.
  14. Luo, R. and Edlund, B. (1996), "Shear capacity of plate girders with trapezoidally corrugated webs", Thin Walled Structures, 26(1), 19-44. https://doi.org/10.1016/0263-8231(96)00006-7
  15. Wright, H.D. and Hossain, K.M.A. (1998), "In-plane shear behaviour of profiled steel sheeting", Thin Walled Structures, 29(1-4), 79-100.
  16. Wright, H.D. and Evans, H.R. (1995), "Profiled steel concrete sandwich elements for use in wall construction", Proc. of the Third Int. Conf. on Sandwich Construction, Southampton, 12-15, September, 1995.
  17. Wright, H.D., Evans, H.R. and Gallocher, S.C. (1992), "Composite walling, composite construction II", Engineering Foundation Conference, Missouri, June 14-19.
  18. Wright, H.D., Hossain, K.M.A. and Gallocher, S.C. (1994), "Composite walls as shear elements in tall structures", Proc. of Papers Presented at ASCE Structures Congress XII, Atlanta, GA, USA, April 24-28, 140-145.
  19. Wright, H.D. (1998), "The axial load behaviour of composite walling", J. Constructional Steel Research, 45(3), 353-375. https://doi.org/10.1016/S0143-974X(97)00030-8
  20. Wright, H.D. and Gallocher, S.C. (1995), "The behaviour of composite walling under construction and service loading", J. Constructional Steel Research, 35(3), 257-273. https://doi.org/10.1016/0143-974X(94)00051-I

피인용 문헌

  1. Profiled sandwich composite wall with high performance concrete subjected to monotonic shear vol.107, 2015, https://doi.org/10.1016/j.jcsr.2015.01.015
  2. Structural behavior of composite wall systems strengthened with embedded cold-formed steel tube vol.98, 2016, https://doi.org/10.1016/j.tws.2015.10.028
  3. Finite element modeling of impact shear resistance of double skin composite wall vol.107, 2016, https://doi.org/10.1016/j.tws.2016.06.002
  4. A state-of-the-art review on double-skinned composite wall systems vol.97, 2015, https://doi.org/10.1016/j.tws.2015.09.007
  5. Structural performance of profiled composite wall under in-plane cyclic loading vol.110, 2016, https://doi.org/10.1016/j.engstruct.2015.11.057
  6. Axial load behaviour of pierced profiled composite walls with strength enhancement devices vol.110, 2015, https://doi.org/10.1016/j.jcsr.2015.03.009
  7. Impact shear resistance of double skin profiled composite wall vol.140, 2017, https://doi.org/10.1016/j.engstruct.2017.02.062
  8. Parametric analysis and calculation method for bending and shear capacities of innovative composite shear walls vol.20, pp.7, 2017, https://doi.org/10.1177/1369433216670171
  9. Behavior of Double Skin Composite Wall Subjected to In-Plane Cyclic Loading vol.135, pp.10, 2009, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000057
  10. Finite element modeling of double skin profiled composite shear wall system under in-plane loadings vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.04.014
  11. Behavior of steel tube-reinforced concrete composite walls subjected to high axial force and cyclic loading vol.36, 2012, https://doi.org/10.1016/j.engstruct.2011.10.026
  12. Flexural and shear behaviour of profiled double skin composite elements vol.4, pp.2, 2004, https://doi.org/10.12989/scs.2004.4.2.113
  13. Quasistatic Cyclic Tests and Finite Element Analysis of Low-Aspect Ratio Double Steel Concrete Composite Walls vol.2019, pp.None, 2004, https://doi.org/10.1155/2019/5917380
  14. A Comparison Between Shear Capacities of Two Composite Shear Walls: DSCSWs and CSPSWs vol.29, pp.2, 2019, https://doi.org/10.1080/10168664.2018.1544473
  15. A Design Formula for Lateral Load Resistance of Concrete Filled Double-Steel-Plate Walls with Small Height-to-Length Ratio vol.23, pp.8, 2019, https://doi.org/10.1007/s12205-019-1588-7
  16. Structural behavior of sandwich composite wall with truss connectors under compression vol.35, pp.2, 2004, https://doi.org/10.12989/scs.2020.35.2.159
  17. Concrete-filled twin-layer steel-sheet CWs system: A systematic review of the literature vol.18, pp.6, 2004, https://doi.org/10.1590/1679-78256622
  18. Numerical Simulation and Shear Capacity Study of a New Double-Steel-Plate Shear Wall vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/5925369
  19. Experimental and analytical investigation on shear behavior of profiled steel sheet dry board composite wall system vol.34, pp.None, 2004, https://doi.org/10.1016/j.istruc.2021.10.012
  20. Mechanical properties of L-shaped column frame combined with shear wall vol.34, pp.None, 2021, https://doi.org/10.1016/j.istruc.2021.10.069