DOI QR코드

DOI QR Code

Harmonic differential quadrature (HDQ) for axisymmetric bending analysis of thin isotropic circular plates

  • 투고 : 2002.11.14
  • 심사 : 2003.10.23
  • 발행 : 2004.01.25

초록

Numerical solution to linear bending analysis of circular plates is obtained by the method of harmonic differential quadrature (HDQ). In the method of differential quadrature (DQ), partial space derivatives of a function appearing in a differential equation are approximated by means of a polynomial expressed as the weighted linear sum of the function values at a preselected grid of discrete points. The method of HDQ that was used in the paper proposes a very simple algebraic formula to determine the weighting coefficients required by differential quadrature approximation without restricting the choice of mesh grids. Applying this concept to the governing differential equation of circular plate gives a set of linear simultaneous equations. Bending moments, stresses values in radial and tangential directions and vertical deflections are found for two different types of load. In the present study, the axisymmetric bending behavior is considered. Both the clamped and the simply supported edges are considered as boundary conditions. The obtained results are compared with existing solutions available from analytical and other numerical results such as finite elements and finite differences methods. A comparison between the HDQ results and the finite difference solutions for one example plate problem is also made. The method presented gives accurate results and is computationally efficient.

키워드

참고문헌

  1. Bellman, R. and Casti, J. (1971), "Differential quadrature and long-term integration". J. of Mathematical Analysis and Application. 34, 235-238. https://doi.org/10.1016/0022-247X(71)90110-7
  2. Bellman, R., Kashef, B.G. and Casti, J. (1972), "Differential Quadrature: A technique for the rapid solution of nonlinear partial differential equation". J. of Computational Physics, 10, 40-52. https://doi.org/10.1016/0021-9991(72)90089-7
  3. Bert, C.W. and Malik, M. (1996a), "The differential quadrature method for irregular domains and application to plate vibration". Int. J. Mech. Sci., 38(6), 589-606. https://doi.org/10.1016/S0020-7403(96)80003-8
  4. Bert, C.W., Jang, S.K. and Striz, A.G. (1987), "Two new approximate methods for analyzing free vibration of structural components". AIAA J., 26(5), 612-618.
  5. Bert, C.W., Wang, X. and Striz, A.G. (1993), "Differential quadrature for static and free vibration analysis of anisotropic plates". Int. J. Solids Struct., 30.(13), 1737-1744. https://doi.org/10.1016/0020-7683(93)90230-5
  6. Bert, C.W. and Malik, M. (1996b), "Free vibration analysis of tapered rectangular plates by differential quadrature method: a semi-analytical approach". J. Sound Vib., 190(1), 41-63. https://doi.org/10.1006/jsvi.1996.0046
  7. Bert, C.W. and Malik, M. (1996c), "Differential quadrature method in computational mechanics: a review". Applied Mechanics Reviews, 49(1), 1-28. https://doi.org/10.1115/1.3101882
  8. Bert, C.W., Wang, X. and Striz, A.G. (1994), "Static and free vibrational analysis of beams and plates by differential quadrature method". Acta Mechanica, 102, 11-24. https://doi.org/10.1007/BF01178514
  9. Berktay, I. (1992), Theory of Plates and Its Applications, Yildiz University Press, Istanbul.
  10. Bjorck, A. and Pereyra, V. (1970), "Solution of Vandermonde system of equations", Mathematical Computing, 24, 893-903. https://doi.org/10.1090/S0025-5718-1970-0290541-1
  11. Chen, W.L., Striz, A.G. and Bert, C.W. (2000), "High-Accuracy plane stress and plate elements in the quadrature element method", Int. J. Solids Struct., 37, 627-647. https://doi.org/10.1016/S0020-7683(99)00028-1
  12. Civalek, O. (1998), Finite Element Analysis of Plates and Shells, University, (in Turkish), Elazig.
  13. Civalek, O. (2001), "Static, dynamic and buckling analysis of elastic bars using differential quadrature", XVI. National Engineering Technical Symposium, METU, Ankara.
  14. Civalek, O. (2002), "Static and dynamic analysis of structures by the method of differential quadrature", University, Elazig.
  15. Du, H., Lim, M.K. and Lin, R.M. (1994), "Application of generalized differential quadrature method to structural problems", Int. J. Num. Meth. Eng., 37, 1881-1896. https://doi.org/10.1002/nme.1620371107
  16. Du, H., Lim, M.K. and Lin, R.M. (1995), "Application of generalized differential quadrature method to vibration analysis", J. Sound Vib., 181(2), 279-293. https://doi.org/10.1006/jsvi.1995.0140
  17. Farsa, J., Kukreti, A.R. and Bert, C.W. (1993), "Fundamental frequency analysis of laminated rectangular plates by differential quadrature method", Int. J. Num. Meth. Eng., 36, 2341-2356. https://doi.org/10.1002/nme.1620361403
  18. Hamming, R.W. (1973), Numerical Methods for Scientists and Engineers, McGraw-Hill, New York.
  19. Han, J.-B. and Liew, K.M. (1997a), "Analysis of moderately thick circular plates using differential quadrature method", J. Eng. Mech., 123(12), 1247-1252. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:12(1247)
  20. Han, J.-B. and Liew, K.M. (1998), "Analysis of annular Reissner/Mindlin plates using differential quadrature method", Int. J. Mech. Sci., 40(7), 651-661. https://doi.org/10.1016/S0020-7403(97)00087-8
  21. Han, J.-B. and Liew, K.M. (1997b), "An eight-node curvilinear differential quadrature formulation for Reissner/Mindlin plates", Comput. Methods Appl. Mech. Engrg., 141, 265-280. https://doi.org/10.1016/S0045-7825(96)01115-2
  22. Jang, S.K., Bert, C.W. and Striz, A.G. (1989), "Application of differential quadrature to static analysis of structural components", Int. J. Numer. Meth. Eng., 28, 561-577. https://doi.org/10.1002/nme.1620280306
  23. Liew, K.M. and Teo, T.M. (1999b), "Three dimensional vibration analysis of rectangular plates based on differential quadrature method", J. Sound Vib., 220(4), 577-599. https://doi.org/10.1006/jsvi.1998.1927
  24. Liew, K.M., Teo, T.M. and Han, J.B. (1999a), "Comparative accuracy of DQ and HDQ methods for threedimensional vibration analysis of rectangular plates", Int. J. Num. Meth. Eng., 45, 1831-1848. https://doi.org/10.1002/(SICI)1097-0207(19990830)45:12<1831::AID-NME656>3.0.CO;2-W
  25. Liew, K.M., Teo, T.M. and Han, J.-B. (2001), "Three dimensional static solutions of rectangular plates by variant differential quadrature method", Int. J. Mech. Sci., 43, 1611-1628. https://doi.org/10.1016/S0020-7403(00)00098-9
  26. Liew, K.M. and Liu, F.-L. (1997a), "Differential cubature method: A solution technique for Kirchhoff plates of arbitrary shape", Comput. Methods Appl. Mech. Engrg., 145, 1-10. https://doi.org/10.1016/S0045-7825(96)01194-2
  27. Liew, K.M. and Han, J.-B. (1997b), "A four-node differential quadrature method for straight-sided quadrilateral Reissner/Mindlin plates", Communications Numerical Methods in Eng., 13(2), 73-81. https://doi.org/10.1002/(SICI)1099-0887(199702)13:2<73::AID-CNM32>3.0.CO;2-W
  28. Liew, K.M., Huang, Y.Q. and Reddy, J.N. (2002), "A hybrid moving least squares and differential quadrature (MLSDQ) meshfree method", Int. J. Comput. Eng. Sci., 3(1), 1-12. https://doi.org/10.1142/S1465876302000526
  29. Liew, K.M. and Han, J.-B. (1997c), "Bending analysis of simply supported shear deformable skew plates", J. Eng. Mech., ASCE, 123(3), 214-221. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(214)
  30. Liu, F.-L. and Liew, K.M. (1998), "Differential cubature method for static solutions of arbitrarily shaped thick plates", Int. J. Solids Struct., 53(28-29), 3655-3647.
  31. Liu, F.-L. and Liew, K.M. (1999c), "Differential quadrature method for static analysis of Reissner-Mindlin polar plates", Int. J. Solids Struct., 36, 5101-5123. https://doi.org/10.1016/S0020-7683(98)00245-5
  32. Shu, C. and Xue, H. (1997), "Explicit computations of weighting coefficients in the harmonic differential quadrature", J. Sound Vib., 204(3), 549-555. https://doi.org/10.1006/jsvi.1996.0894
  33. Shu, C. and Richards, B.E. (1992), "Application of generalized differential quadrature to solve twodimensional incompressible Navier - Stokes equations", Int. J. Numer. Meth. Fluids, 15, 791-798. https://doi.org/10.1002/fld.1650150704
  34. Shu, C. and Chew, Y.T. (1998), "On the equivalence of generalized differential quadrature and highest order finite difference scheme", Comput. Meth. Appl. Mech. Eng., 155, 249-260. https://doi.org/10.1016/S0045-7825(97)00150-3
  35. Striz, A.G., Jang, S.K. and Bert, C.W. (1988), "Nonlinear bending analysis of thin circular plates by differential quadrature", Thin-Walled Structures, 6, 51-62. https://doi.org/10.1016/0263-8231(88)90025-0
  36. Striz, A.G., Wang, X. and Bert, C.W. (1995), "Harmonic differential quadrature method and applications to analysis of structural components", Acta Mechanica, 111, 85-94. https://doi.org/10.1007/BF01187729
  37. Striz, A.G., Chen, W. and Bert, C.W. (1994), "Static analysis of structures by the quadrature element method", Int. J. Solids Struct., 31(20), 2807-2818. https://doi.org/10.1016/0020-7683(94)90070-1
  38. Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, 2nd Ed. McGraw-Hill, New York.
  39. Ugural, A.C. (1999), Stresses in Plates and Shells, Second Edition, McGraw Hill Companies.
  40. Quan, J.R. and Chang, C.T. (1989), "New insights in solving distributed system equations by the quadrature method-I analysis", Computers in Chemical Engineering, 13(7), 779-788. https://doi.org/10.1016/0098-1354(89)85051-3

피인용 문헌

  1. Weak form quadrature element analysis of sandwich panels with functionally graded soft-cores vol.159, 2017, https://doi.org/10.1016/j.compstruct.2016.09.043
  2. Free vibration of orthotropic functionally graded beams with various end conditions vol.20, pp.4, 2005, https://doi.org/10.12989/sem.2005.20.4.465
  3. Symbolic computation and differential quadrature method - A boon to engineering analysis vol.27, pp.6, 2007, https://doi.org/10.12989/sem.2007.27.6.713
  4. Analysis of composite plates using moving least squares differential quadrature method vol.238, 2014, https://doi.org/10.1016/j.amc.2014.02.101
  5. Accurate stress analysis of sandwich panels by the differential quadrature method vol.43, 2017, https://doi.org/10.1016/j.apm.2016.11.034
  6. Geometrically nonlinear dynamic and static analysis of shallow spherical shell resting on two-parameters elastic foundations vol.113, 2014, https://doi.org/10.1016/j.ijpvp.2013.10.014
  7. Damage Detection of Bridges Using Vibration Data by Adjoint Variable Method vol.2014, 2014, https://doi.org/10.1155/2014/698658
  8. Free vibration of soft-core sandwich panels with general boundary conditions by harmonic quadrature element method vol.113, 2017, https://doi.org/10.1016/j.tws.2016.12.004
  9. On radially symmetric vibrations of non-uniform annular sandwich plates vol.94, 2015, https://doi.org/10.1016/j.tws.2015.05.009
  10. Nonlinear analysis of thin rectangular plates on Winkler–Pasternak elastic foundations by DSC–HDQ methods vol.31, pp.3, 2007, https://doi.org/10.1016/j.apm.2005.11.023
  11. Elastic buckling behavior of skew shaped single-layer graphene sheets vol.550, 2014, https://doi.org/10.1016/j.tsf.2013.10.021
  12. Static and dynamic response of sector-shaped graphene sheets vol.23, pp.4, 2016, https://doi.org/10.1080/15376494.2014.984089
  13. Analytical bending solutions of clamped rectangular thin plates resting on elastic foundations by the symplectic superposition method vol.26, pp.3, 2013, https://doi.org/10.1016/j.aml.2012.10.004
  14. Semi-analytical approach for free vibration analysis of cracked beams resting on two-parameter elastic foundation with elastically restrained ends vol.9, pp.2, 2014, https://doi.org/10.1007/s11465-014-0293-y
  15. Free vibration and stability of tapered Euler–Bernoulli beams made of axially functionally graded materials vol.36, pp.7, 2012, https://doi.org/10.1016/j.apm.2011.09.073
  16. Nonlinear dynamic response of MDOF systems by the method of harmonic differential quadrature (HDQ) vol.25, pp.2, 2007, https://doi.org/10.12989/sem.2007.25.2.201
  17. Geometrically nonlinear dynamic analysis of doubly curved isotropic shells resting on elastic foundation by a combination of harmonic differential quadrature-finite difference methods vol.82, pp.6, 2005, https://doi.org/10.1016/j.ijpvp.2004.12.003
  18. Vibration of annular plate concentrators with conical cross-section vol.321, pp.3-5, 2009, https://doi.org/10.1016/j.jsv.2008.10.010
  19. Free vibration analysis of axially functionally graded tapered Timoshenko beams using differential transformation element method and differential quadrature element method of lowest-order vol.49, pp.4, 2014, https://doi.org/10.1007/s11012-013-9847-z
  20. Free vibration analysis of soft-core sandwich beams by the novel weak form quadrature element method vol.18, pp.3, 2016, https://doi.org/10.1177/1099636215601373
  21. Novel weak form quadrature element method with expanded Chebyshev nodes vol.34, 2014, https://doi.org/10.1016/j.aml.2014.03.015
  22. Free vibration analysis of circular thin plates with stepped thickness by the DSC element method vol.85, 2014, https://doi.org/10.1016/j.tws.2014.07.010
  23. Thermal buckling of FGM nanoplates subjected to linear and nonlinear varying loads on Pasternak foundation vol.5, pp.4, 2016, https://doi.org/10.12989/amr.2016.5.4.245
  24. A semi-analytical three-dimensional free vibration analysis of functionally graded curved panels vol.87, pp.8, 2010, https://doi.org/10.1016/j.ijpvp.2010.06.001
  25. HDQ-FD integrated methodology for nonlinear static and dynamic response of doubly curved shallow shells vol.19, pp.5, 2005, https://doi.org/10.12989/sem.2005.19.5.535
  26. Stability and accuracy of three Fourier expansion-based strong form finite elements for the free vibration analysis of laminated composite plates vol.111, pp.4, 2017, https://doi.org/10.1002/nme.5468
  27. Three-dimensional vibration, buckling and bending analyses of thick rectangular plates based on discrete singular convolution method vol.49, pp.6, 2007, https://doi.org/10.1016/j.ijmecsci.2006.10.002
  28. Three-dimensional free vibration analysis of thick cylindrical shells resting on two-parameter elastic supports vol.313, pp.3-5, 2008, https://doi.org/10.1016/j.jsv.2007.12.004
  29. Static analysis of sandwich panels with non-homogeneous soft-cores by novel weak form quadrature element method vol.146, 2016, https://doi.org/10.1016/j.compstruct.2016.03.017
  30. Nonlinear dynamic response of laminated plates resting on nonlinear elastic foundations by the discrete singular convolution-differential quadrature coupled approaches vol.50, 2013, https://doi.org/10.1016/j.compositesb.2013.01.027
  31. Frequencies of FGM shells and annular plates by the methods of discrete singular convolution and differential quadrature methods vol.183, 2018, https://doi.org/10.1016/j.compstruct.2016.11.051
  32. On the use of differential quadrature method in the study of free axisymmetric vibrations of circular sandwich plates of linearly varying thickness vol.22, pp.7, 2016, https://doi.org/10.1177/1077546314544695
  33. A novel sensitivity method to structural damage estimation in bridges with moving mass vol.54, pp.6, 2015, https://doi.org/10.12989/sem.2015.54.6.1217
  34. Frequency analysis of annular plates with inner and outer edges elastically restrained and resting on Winkler foundation vol.81, 2014, https://doi.org/10.1016/j.ijmecsci.2014.02.022
  35. Dynamic investigation of a concrete footbridge using finite element modelling and modal analysis vol.9, pp.8, 2013, https://doi.org/10.1080/15732479.2011.611147
  36. Nonlinear surface and nonlocal piezoelasticity theories for vibration of embedded single-layer boron nitride sheet using harmonic differential quadrature and differential cubature methods vol.26, pp.10, 2015, https://doi.org/10.1177/1045389X14538331
  37. Experimental study on bridge structural health monitoring using blind source separation method: arch bridge vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.069
  38. Static analysis of higher order sandwich beams by weak form quadrature element method vol.116, 2014, https://doi.org/10.1016/j.compstruct.2014.06.015
  39. Three-dimensional temperature dependent free vibration analysis of functionally graded material curved panels resting on two-parameter elastic foundation using a hybrid semi-analytic, differential quadrature method vol.31, pp.1, 2010, https://doi.org/10.1016/j.matdes.2009.07.025
  40. Harmonic Differential Quadrature Analysis of Soft-Core Sandwich Panels under Locally Distributed Loads vol.6, pp.12, 2016, https://doi.org/10.3390/app6110361
  41. Vibration Analysis of Annular Sector Plates under Different Boundary Conditions vol.2014, 2014, https://doi.org/10.1155/2014/517946
  42. Parametric resonance of truncated conical shells rotating at periodically varying angular speed vol.333, pp.13, 2014, https://doi.org/10.1016/j.jsv.2014.02.020
  43. Harmonic differential quadrature-finite differences coupled approaches for geometrically nonlinear static and dynamic analysis of rectangular plates on elastic foundation vol.294, pp.4-5, 2006, https://doi.org/10.1016/j.jsv.2005.12.041
  44. A state space meshless method for the 3D analysis of FGM axisymmetric circular plates vol.22, pp.1, 2016, https://doi.org/10.12989/scs.2016.22.1.161
  45. LARGE DEFLECTION STATIC AND DYNAMIC ANALYSIS OF THIN CIRCULAR PLATES RESTING ON TWO-PARAMETER ELASTIC FOUNDATION: HDQ/FD COUPLED METHODOLOGY APPROACHES vol.02, pp.02, 2005, https://doi.org/10.1142/S0219876205000478
  46. Vibration analysis of FG cylindrical shells with power-law index using discrete singular convolution technique vol.3, pp.1, 2016, https://doi.org/10.1515/cls-2016-0007
  47. Nonlocal buckling analysis of functionally graded annular nanoplates in an elastic medium with various boundary conditions vol.23, pp.8, 2017, https://doi.org/10.1007/s00542-016-3210-y
  48. Free Vibration Analysis of Rings via Wave Approach vol.2018, pp.1875-9203, 2018, https://doi.org/10.1155/2018/6181204
  49. A unified procedure for free transverse vibration of rectangular and annular sectorial plates pp.1432-0681, 2019, https://doi.org/10.1007/s00419-019-01519-y
  50. Differential quadrature method for frequency analysis of membranes having irregular domains using an eight-node curvilinear element vol.5, pp.5, 2004, https://doi.org/10.12989/sss.2009.5.5.587
  51. Differential quadrature method for free vibration analysis of coupled shear walls vol.41, pp.1, 2004, https://doi.org/10.12989/sem.2012.41.1.067
  52. A semi-analytical three-dimensional free vibration analysis of functionally graded curved panels integrated with piezoelectric layers vol.21, pp.4, 2014, https://doi.org/10.1515/secm-2013-0225
  53. A semi-analytical three-dimensional free vibration analysis of functionally graded curved panels integrated with piezoelectric layers vol.21, pp.4, 2014, https://doi.org/10.1515/secm-2013-0225
  54. Analysis of non-homogeneous orthotropic plates using EDQM vol.61, pp.2, 2004, https://doi.org/10.12989/sem.2017.61.2.295
  55. Free transverse vibration of shear deformable super-elliptical plates vol.24, pp.4, 2017, https://doi.org/10.12989/was.2017.24.4.307
  56. Deformation and stress analysis of a sandwich cylindrical shell using HDQ Method vol.27, pp.1, 2004, https://doi.org/10.12989/scs.2018.27.1.035
  57. Analytical Bending Solutions of Orthotropic Rectangular Thin Plates with Two Adjacent Edges Free and the Others Clamped or Simply Supported Using Finite Integral Transform Method vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/8848879
  58. Numerical analysis of thermal post-buckling strength of laminated skew sandwich composite shell panel structure including stretching effect vol.34, pp.2, 2004, https://doi.org/10.12989/scs.2020.34.2.279
  59. Mechanical analysis of functionally graded spherical panel resting on elastic foundation under external pressure vol.74, pp.2, 2004, https://doi.org/10.12989/sem.2020.74.2.297
  60. Analytical bending solutions of thin plates with two adjacent edges free and the others clamped or simply supported using finite integral transform method vol.39, pp.4, 2020, https://doi.org/10.1007/s40314-020-01310-8
  61. An Analytical Solution for the Vibration and Far-Field Sound Radiation Analysis of Finite, Semisubmerged Cylindrical Shells vol.2021, pp.None, 2004, https://doi.org/10.1155/2021/9996960
  62. Using orthotropic viscoelastic representative elements for C1-continuous zigzag dynamic response assessment of sandwich FG circular plates with unevenly damaged adhesive layers vol.49, pp.3, 2004, https://doi.org/10.1080/15397734.2019.1687313