Electrochemical Analysis of the Microbiologically Influenced Corrosion of Steels by Sulfate-Reducing Bacteria

  • Moon, Kyung-Man (Institute of Corrosion & Corrosion Control, Korea Maritime University) ;
  • Lee, Myung-Hoon (Institute of Corrosion & Corrosion Control, Korea Maritime University) ;
  • Kim, Ki-Joon (Institute of Corrosion & Corrosion Control, Korea Maritime University) ;
  • Kim, Seong-Jong (Institute of Corrosion & Corrosion Control, Korea Maritime University) ;
  • Shin, Sung-Kyu (Division of Civil and Environmental Engineering, Korea Maritime University) ;
  • Koh, Sung-Cheol (Division of Civil and Environmental Engineering, Korea Maritime University)
  • Published : 2004.10.01

Abstract

We have investigated the differences between the general corrosion and microbiologically influenced corrosion (MIC) of steels in terms of electrochemical behavior and surface phenomena. Corrosion potential of steels in the absence of SRB (sulfate-reducing bacteria) shifted to a low level and was maintained throughout the experimental period (40 days). The potential in the presence of SRB, however, shifted to a noble level after 20 days' incubation, indicating the growth of SRB biofilms on the test metal specimens and a formation of corrosion products. In addition, the color of medium inoculated with SRB changed from gray to black. The color change appeared to be caused by the formation of pyrites (FeS) as a corrosion product while no significant color change was observed in the medium without SRB inoculation. Moreover, corrosion rates of various steels tested for MIC were higher than those in the absence of SRB. This is probably because SRB were associated with the increasing corrosion rates through increasing cathodic reactions which caused reduction of sulfate to sulfide as well as formation of an oxygen concentration cell. The pitting corrosions were also observed in the SRB-inoculated medium.

Keywords

References

  1. M. Yama, Proceedings of the 100$^th$ Corrosion & Corrosion Control Institute Symposium, p.55 (in Japanese), (1994)
  2. M. Yama, Proceedings of the 36$^th$ Corrosion & Corrosion Control Institute Symposium, p.1449 (in Japanese), (1989)
  3. N. Mura, Proceedings of the 89$^th$ Corrosion & Corrosion 192 Control Institute Symposium, p49 (in Japanese), (1992)
  4. W. Sin, Engineering Department of Hoka College, p.5, (1999)
  5. Oil Companies International Marine Forum, Factors Influencing Accelerated Corrosion of Caryo Oil Tank, p.l, (Sept 1997)
  6. A. Hagenauer, R. Hilpert, and T. Hack, Week stoffe und Korrosion 355, 45 (1994)
  7. K. R. Sreekumari, M. Ozawa, and y. Kikuchi, IDJI. International, 54, 40 (2000)
  8. Proc. 10$^th$ International Biodeferioration and Biodegradation Symposium, Hamburg, September, p4, 1994)
  9. G. J. Licina, Source Book for Microbiologically Influenced Corrosion in Nuclear Power Plants, Electric Power Research Institute Report, p.35, (1998)
  10. Y. Kikuchi, K.Tohomoto, M. Ozawa, and T. kanamaru, Corrosion 199 Paper No.170
  11. Y. Toyuo, Corrosion Engineering & Corrosion Technology, Corona(Eds), p.361 (in Japanese), (1975)
  12. S. Hyra, Journal of the Japan Institute of Metals, 135, 9, (1970)
  13. J. W. West, Corrosion and Oxide, p.104, Industry Publication (S. Nota Trans.), Tokyo, Japan, 1990
  14. J. You, Journal of the Japan Institute of Metals, 58, 775 (1994)
  15. A High Molecule Society, A Society for the Research of Bio . High Molecule, p.189, (1988)
  16. Y. Kikuchi and K. Tohomoto, ZAIRYO-TO-KANKYO, 47, 467 (1998)
  17. A. K. Tiller, Biologically Induced Corrosion, S. C. Dexter, ed., NACE, Houston, p.8, 1986
  18. Y. Kikuchi, Technical Explanation, Joining and Welding Research Institute, Osaka University, 7, 119 (1999)