DOI QR코드

DOI QR Code

Analysis of NRRO Caused by Ball Bearing in a HDD Spindle System at Elevated Temperature

볼 베어링에 의해 발생하는 HDD 회전축계 NRRO의 온도 상승에 따른 변화

  • Published : 2004.03.01

Abstract

This research investigates the non-repeatable runout (NRRO) of a HDD spindle system at elevated temperature by analyzing the characteristics of a ball bearing and the natural vibration characteristics of a HDD spindle system due to the effect of elevated temperature. It shows that the elevated temperature results in the increase of the contact angle and the decrease of the deformation of the ball bearing in a HDD spindle system. The variation of bearing frequencies, which are dependent on the cosine function of contact angle, is almost negligible at elevated temperature. However, the decrease of bearing deformation at elevated temperature reduces the stiffness of the ball bearing and the natural frequencies of a HDD spindle system consequently. The latter has a significant effect on the amplitude and the frequency distribution of NRRO at elevated temperature.

Keywords

References

  1. Tseng, Chaw-Wu, Shen, Jr-Yi, Ku, C. -P. R. and Shen, I. Y., 2002, 'Effects of Elevated Temperatures on Rocking Vibration of Rotating Disk and Spindle Systems,' ASME Journal of Tribology, Vol. 124, No. 4, pp. 794-800 https://doi.org/10.1115/1.1456456
  2. 김동균, 장건희, 한재혁, 김철순, 2003, '온도 변화에 따른 HDD 회전축계 동특성 해석,' 한국소음진동공학회논문집, 제13권 제10호, pp. 805-812
  3. Jang, G. H., Kim, D. K., Kim, C. S. and Lee, H. S., 2004, 'Improvement of Dynamic Characteristics of a HDD Spindle System Su- pported by Ball Bearing at Elevated Temperature,' Microsystem Technologies, will be Published
  4. Stein, J. L. and Tu, J. F., 1994, 'A State- space Model for Monitoring Thermally Induced Preload in Anti-friction Spindle Bearings of High Speed Machine Tools,' ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 116(3), September, pp. 372-386 https://doi.org/10.1115/1.2899232
  5. Harris, T. A., 1991, Rolling Bearing Analy- sis, 3rd Edn., John Wiley & Sons.
  6. Jones, A. B., 1960, 'A General Theory for Elastically Constrained Ball and Roller Bearing under Arbitrary Load and Speed Conditions,' ASME Journal of Basic Engineering, June, pp. 309-320
  7. Akturk, Nizami, 1999, 'The Effect of Wavi- ness on Vibrations Associated with Ball Bearings,' ASME Journal of Tribology, Vol. 121, pp. 667-677 https://doi.org/10.1115/1.2834121
  8. Jang, G. H. and Jeong, S. W., 2002, 'Non- linear Excitation Model of Ball Bearing Waviness in a Rigid Rotor Supported by Two or More Bearings Considering Five Degrees of Freedom,' ASME Journal of Tribology, Vol. 124, pp. 82-90 https://doi.org/10.1115/1.1398289
  9. Igarashi, Teruo and Hamada, Hiroyoshi, 1982, 'Studies on the Vibration and Sound of Defective Rolling Bearings (First Report; Vibration of Ball Bearings with One Defect),' Bulletin of JSME, Vol. 25, No. 204, pp. 994-1001 https://doi.org/10.1299/jsme1958.25.994
  10. Jang, G. H., Kim, D. K. and Oh, J. E., 1999, 'New Frequency Domain Method of Non- repeatable Runout Measurement in a Hard Disk Drive Spindle Motor,' IEEE Transaction on Mag- netics, Vol. 35, No. 2, pp. 833-838 https://doi.org/10.1109/20.753794
  11. Shen, Jr-Yi, Tseng, Chaw-Wu, Shen, I. Y. and Ku, C. -P. R., 2000, 'Vibration of Disk Media at Elevated Temperatures,' Journal of Information Storage and Processing Systems, Vol. 2, pp. 307-312