Acknowledgement
본 연구는 농림기술개발사업의 지원에 의하여 수행되었음
Journal of the Korean Wood Science and Technology
- Volume 32 Issue 4
- /
- Pages.1-7
- /
- 2004
- /
- 1017-0715(pISSN)
- /
- 2233-7180(eISSN)
Effect of Impregnation Ratio and Carbonizing Temperature on Surface Temperature of Woodceramics Made from Thinned Logs of Pinus densiflora S. et. Z.
함침율 및 소성온도가 소나무 간벌재로 제조된 우드세라믹의 표면온도에 미치는 영향
- Oh, Seung-Won (College of Agriculture & Life Science, Research Institute of Bioindustry, Chonbuk National University) ;
- Byeon, Hee-Seop (College of Agriculture & Life Science, Institute of Agriculture & Life Science. Gyeonsang National University)
- Received : 2004.02.04
- Accepted : 2004.04.15
- Published : 2004.07.25
Abstract
The change in surface temperature of woodceramics, made from thinned logs of Pinus densiflora, were investigated, by the impregnation ratio and carbonizing temperature. As the surface temperature of silicon rubber heater was going up, that of woodceramics also increase rapidly. In case of heaters surface temperature at 70℃, the surface temperature of woodceramics was 53.9℃ when a sample was the impregnation ratio of 80%, while it was 54.2℃ when a sample was at 1,000℃ in carbonizing temperature, showing the highest. Also, it was found that woodceramics maintained heat for a long time because the descending velocity of their surface temperature was lower than that of the heater.
소나무 간벌재로 톱밥보드를 만든 후 우드세라믹을 제조하여 수지함침율 및 소성온도에 따른 우드세라믹의 표면온도의 변화를 조사하였다. 실리콘러버 히터의 표면온도가 증가함에 따라 우드세라믹의 표면온도도 빠른 속도로 증가하였으며, 히터의 설정표면온도가 70℃ 일때 수지함침율 80% 시편의 표면온도는 53.9 ℃이었으며, 소성온도 1,000℃ 조건으로 제조된 우드세라믹의 표면 온도는 54.2 ℃로 가장 높았다. 히터의 표면온도보다 우드세라믹 표면온도의 하강 속도가 느려 우드세라믹이 오랜 시간 열을 유지하고 있음을 알 수 있었다.