DOI QR코드

DOI QR Code

비행 시뮬레이터용 조종력 재현 장치 설계 및 시험연구

Research on the Design and Evaluation of a Control Loading System for Flight Simulator

  • 이찬석 (한국항공우주산업(주)) ;
  • 김병수 (경상대학교 기계항공공학부/항공기부품 기술연구소)
  • 발행 : 2004.05.01

초록

본 논문에서는 기계적 링키지의 가역 (Reversible) 비행조종장치를 갖는 항공기익 조종간 조종력 재현 시스템 (CLS : Control Loading System) 개발을 목적으로 조종력 재현 장치 제어기 설계, 시스템 구성, 조종력 재현 장치 운용 환경을 구축하고 시험평가를 수행한 내용을 기술한다. 시스템 구성은 기계적인 외형부분과 힘을 측정하는 센서부분과 스틱에서의 반력을 재현하는 모터부분과 안전장치로 되어 있다. 하드웨어와 PC간의 입출력 신호 연결 및 제이기로 dSpace 사의 DS1103 DSP장치를 사용하였다. 대상항공기 (KT-1)의 비행 조종장치 모델링을 바탕으로 피치축과 롤축에 대한 CLS를 구성하고, 조종력 재현장치 제어법칙 설계와 모니터링 S/W 및 실시간 시험평가도구를 포함한 시험평가 및 운용환경 대해 기술하였다. 정적 및 동적시험을 수행하여 실제 대상항공기 데이터와 비교함으로써 개발한 시스템을 검증하였다.

This paper represents the development of a CLS(Control Loading System) for a target a airplane (KT-1) with mechanical linkage reversible flight control system. The system is composed of mechanical frame, controller, sensing part to measure the force from the stick, driving system generating the reaction forces. The DS1103 DSP(Digital Signal Processor) of the dSpace Corp. was used as the controller. The control algorithm of the CLS and the operational environment including monitoring software and evaluation tools are described. The evaluation of the system was conducted according to the requirement specification. The results of the test were analyzed by comparing with the actual data of the target airplane.

키워드

참고문헌

  1. Fligh Control Systems - Design, Installation and Test of Piloted Aircraft MIL-F-9490D, Department of Defense, U.S.A.
  2. R. De Valois, Fokker Control Systems, Report, 2000.
  3. 서보 드라이버 Mamual, SERVO DRIVE (FARA CSDJ-02) 사용자 설명서, 삼성전자, 1999.
  4. dSPACE Manual, RTI and RTI-MP Implementation Guide, dSPACE, 2001.