초록
고속 유동 속에 놓인 모델 표변의 압력분포를 정량적으로 측정하기 위해 PSP 기술이 사용되고 있다. 본 연구에서는 아음속 유동에 적용 가능한 PSP 기술을 개발하였다. 2가지의 백금계열 (PtOEP와 PtTFPP)의 발광분자와 2 가지의 폴리머 (Poly(TMSP)와 RTV-118)를 사 용하여 4가지의 PSP 조합을 만들어 그 성능을 확인하였다. 압력변화에 따른 PSP의 발광강 도를 측정하기 위해 $0{\sim}11kPa$까지 0.5, 1, 2kPa썩 압력을 증가시키면서 정적보정실험을 수행하였다. 4가지의 PSP 조성 중에 PtOEP 와 RTV-118의 조합이 가장 좋은 성능을 보였다. 충돌평판에 작용하는 압력장 분포를 측정하기 위하여 경사충돌분류에 본 연구에서 개발된 PSP 기술을 응용하였다.
The PSP technique has been used to measure pressure distribution on model surfaces ins high-speed flows. The objective of this study is to develop a PSP technique which can be applied to low-speed aerodynamic flows. Four different PSP formulations including two porphyrins (PtOEP and PtTFPP) and two polymers (Poly(TMSP) and RTV-118) were tested and the performance of each combination was evaluated. In a static calibration, the luminescent intensity of the PSP coatings was measured from 0kPa to 11kPa with 0.5, 1, 2kPa increments. Among 4 PSP formulations tested, the combination of PtOEP and RTV-118 shows the best performance. The developed PSP technique was applied to an oblique impinging jet to measure the pressure field distribution on the impinging plate.