A Signal Anti-reduction System for Power Line Communication

  • Ko Jong-Sun (Department of Electric Electronics and Computer Eng. Dankook University) ;
  • Kim Hyun-Sik (Department of Electric Electronics and Computer Eng. Dankook University) ;
  • Hong Soon-Chan (Department of Electric Electronics and Computer Eng. Dankook University)
  • 발행 : 2004.10.01

초록

A new communication system is suggested using a single-phase full-bridge inverter with high efficiency ferrite core for power line communication (PLC). The conventional system has a decreasing signal voltage problem due to internal resistance. The proposed system has almost zero internal impedance and replaces a linear amplifier.

키워드

참고문헌

  1. M. H. Shwehdi, A. Z. Khan: 'A Powεr Line Data Communication Interface using Spread Spectrum Technology in Home Automation', IEEE Transactions on Power Delivery, Vol. 2, No.3, July 1996.
  2. Min-Sang Seo, Seuk-Kyung Sung, Byung-Gyu Ann: 'Spread Spectrum Method based Power Line Communication for Plant Monitoring and Control System' , The Transactions of the Korean Institute of Power Electronics, 1997, pp 17-19
  3. Masaoki Tanaka: 'High Frequency Noise Power Spectrum, Impedance & Transmission Loss of Power Line in Japan on Intra-building Power Line Communications', IEEE Transaction on Consumer Electronics, Vol.34, No.2, May 1988.
  4. Denny Radford, Member IEEE: 'New Spread Spectrum Technologies Enable Low Cost Control Applications for Residential and Commercial Use' , Intellon Corporation Ocala, Florida 34482 USA
  5. K. C. Abraham & S. Roy: ‘A Novel High-Speed PLC Communication Modem', IEEE Transaction on Power Delivery, Vol. 7, No.4, October 1992, pp 1760-1768
  6. 'SSC P400 Hard ware Design Reference - Technical Reference Note #0026', Intellon.