Journal of the Korea Safety Management & Science (대한안전경영과학회지)

Korea Safety Management & Science (대한안전경영과학회)
권호 표지

- Analysis of Likelihood of Failure for the External Corrosion of Stainless Steel through the Quantitative Risk Based Inspection Using API-581 -

API-581에 의한 정량적 위험기반검사에서 스테인리스강의 외부부식에 의한 사고발생 가능성 해석

  • 이헌창 (명지대학교 공과대학 화학공학과) ;
  • 김환주 (명지대학교 공과대학 화학공학과) ;
  • 김태옥 (명지대학교 공과대학 화학공학과)
  • Published : 2004.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels

Keywords

References

  1. API, 'Fitness For Service : API 579', American Petroleum Institute, 1999
  2. KAERI, 'The 7th Korea-Japan PSA workshop', Korea Atomic Energy Research Institute, May, 2002
  3. API, 'Based Resource Document of Risk Based Inspection : API 580', American Petroleum Institute(API), 2001
  4. API, 'RBI Basic Resource Document : API 581', American Petroleum Institute, 2000
  5. DNV, 'User Manual for Process Hazard Analysis Software Tools (PHAST)', Ver 4.1, DNV Technical Manual, 1993
  6. F. I. khan and M. M. Haddara, 'Risk-Based Maintenance(RBM) : A Quantitative Approach for Maintenance/Inspection Scheduling and Planning', J. of Loss Prevention in the Process Industries, 16, 561-573, 2003 https://doi.org/10.1016/j.jlp.2003.08.011
  7. J. R. Shims and R. E. Feigel, 'The Use of Risk-Based Approaches in Post-Construction Standards', J. of Pressure Vessel Technology, 122, 147-154, 2000
  8. W. G. Ashbaugh, 'Inspection of Vessels and Piping for Corrosion Under Insulation Corrosion : When, Where, and How To Do It', Materials Performance, 29(6), 38-42, 1990
  9. NACE, 'A State-of-the-Art Report for Carbon Steel and Austenitic Stainless Steel Surfaces Under Thermal Insulation and Cementitious Fireproofing', National Association of Corrosion Engineers Publication 6H189, Item No. 54268, 1978
  10. 이헌창, 유준, 김환주, 김태옥, 'API-581에 의한 정성적 위험기반검사(RBI) 프로그램 개발', 안전경영과학회지, 6(1), 49-60, 2004
  11. ASME, 'Risk-Based Inspection, Development of Guidelines', CRTD, 20(1), American Society of Mechanical Engineers, 1994
  12. H. C. Lee, 'Improved Risk-Based Inspection Supporting the Quantitative Cause Analysis', Ph.D. Thesis, Myongji University, August, 2004