초록
연속 주조 공정에서 설정한 속도로 주편을 인발하는 스트랜드 구동롤에 인발력이 적절하게 분배가 되지 않으면 주형 레벨의 주기적인 변동을 유발시킴과 동시에 주편의 품질을 저하하게 된다. 따라서 본 논문에서는 주편의 속도를 제어함과 동시에 각 구동롤에 운전자가 원하는 비율로 인발력을 분배할 수 있는 알고리즘을 제안한다. 제안된 방법은 전동기에 작용하는 토크 전류를 상위 제어기로 귀환하여 평균 토크 전류를 산출하고 각 구동롤 전동기의 토크 전류와 비교하여 전동기의 속도 기준값을 미소하게 변경함으로써 각 구동롤 전동기의 토크 전류가 평균 토크 전류에 추종하도록 하여 인발력을 분배한다. 그리고 과도상태 개선을 위하여 안티와인더업(anti-wind up) 제어기를 가진 인발력 제어기를 적용하였으며, 제안된 알고리즘의 확인을 위하여 포스코의 시험연주기에 적용하여 우수성을 입증하였다.
If the withdrawal force of strand driven roll which is controlled with predetermined speed isn't distributed regularly in continuous casting process, mold level is changed cyclically and slab quality is not good. In this paper, both casting speed control and load sharing control algorithm of strand driven roll according to ratio which is set up by operator at same time is proposed. The proposed algorithm is to share the withdrawal force by following torque current of each driven roll as average torque current by changing speed reference of each driven roll motor. The load sharing control with anti-wind up for improvement transient state is adopted and the proposed algorithm is implemented in POSCO pilot caster.