Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Response Modification Factors of Inverted V-type Ordinary Concentrically Braced Frames

역V형 보통가새골조의 반응수정계수

  • 김진구 (성균관대학교 건축공학과) ;
  • 남광희 (성균관대학교 건축공학과)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper the overstrength factors, ductility factors, and response modification factors of ordinary concentric braced frames designed in accordance with a current seismic design code are determined by performing pushover analysis. According to the analysis results, the overstrength and the response modification factors turn out to be larger than the values regulated in the codes in most model structures. However if the braces are reinforced by BRB or zipper columns, the overstrength factors and response modification factors turn out to increase significantly.

본 논문에서는 현행 내진설계방법에 따라 설계된 역V형 보통 가새골조 (OCBF)의 비선형 정적 해석을 수행하고, 그 결과를 바탕으로 초과강도계수, 연성계수, 반응수정계수 및 변위 증폭계수 등을 산정하였다. 해석결과에 따르면 대부분의 해석모델에서 현행 내진설계 기준에서 제시한 값보다 작은 초과강도계수 및 반응수정계수 값을 가지는 것으로 나타났다. 그러나 수직 보강 기둥 (zipper column)으로 가새를 보강한 경우 초과강도계수 및 반등수정계수는 보통 가새 구조물에 비하여 상당히 증가하는 것으로 나타났다.

Keywords

References

  1. ATC, 'Tentative provisions for the development of seismic regulations for buildings,' ATC-3-06, Applied Technology Council, Redwood City, California, 1978, pp. 45-53
  2. ATC, 'Structural response modification factors,' ATC-19, Applied Technology Council, Redwood City, California, 1995, pp. 5-32
  3. ATC, 'A critical review of current approaches to earthquake-resistant design,' ATC-34, Applied Technology Council, Redwood City, California, 1995, pp. 31-36
  4. Uang, C. M., 'Establishing R(or $R_w$) and $C_d$ factors for building seismic provisions,' Journal of Structural Engineering, Vol. 119, No. 1, 1991, pp. 19-28
  5. Osteraas, J. D., 'Strength and ductility considerations in seismic design,' Ph.D dissertation, Stanford University, Stanford, California, 1990
  6. Balendra, T. and Huang, X., 'Overstrength and ductility factors for steel frames designed according to BS 5950,' Journal of Structural Engineering, Vol. 129, No. 8, 2003, pp. 1019-1035 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1019)
  7. ICC, International Building Code, International Code Council, 2000
  8. AISC, Seismic Provisions for Structural Steel Buildings, AISC, Chicago, IL, 2002
  9. BSSC, NEHRP Recommended Provisions for the Development of Seismic Regulations for New Buildings, FEMA302, Federal Emergency Management Agency, Washington, DC, 1997
  10. Prakash, V., Powell, G. H, and Campbell,S., DRAIN-2DX, Static and Dynamic Analysis of Plane Structure, NISEE, Earthquake Engineering Research Center, University of California, Berkeley, 1993
  11. BSSC, NEHRP Commentary on The Guidelines for The Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency Management Agency, Washington, DC, 1997
  12. BSSC, Prestandard and Commentary for The Seismic Rehabilitation of Building, FEMA-356, Federal Emergency Management Agency, Washington, DC, 2000
  13. SEAOC, Recommended Lateral Force Requirements and Commentary, SEAOC Blue Book, Structural Engineers Association of California, 1997
  14. Newmark, N. M. and Hall, W. J., Earthquake spectra and Design, EERI Monograph Series, Earthquake Engineering Research Institute, Oakland, 1982
  15. Miranda, E. and Bertero, V. V., 'Evaluation of strength reduction factors for earthquake-resistant design,' Earthquake Spectra, Vol. 10, No. 2, 1994, pp. 357-379 https://doi.org/10.1193/1.1585778
  16. Rai, D. C. and Goel, S. C., 'Seismic Evaluation and Upgrading of Chevron Braced Frames,' Journal of Construction Steel Research, Vol. 59, No.8, 2003, pp.971-994
  17. 김남훈, 이철호, '역V형 철골가새골조의 비탄성거동 및 내진성능 향상방안에 관한 연구', 2003년도 한국강구조학회 논문집, 제15권 제5호, 2003, pp. 571-578