Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

An Application of XML Based Manufacturing Information for Forming Shop

XML을 이용한 곡면 가공 시스템의 정보 구조화에 관한 연구

  • Ha, Kwang-Cheol (Dept. of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Lee, Jang-Hyun (Research Institute of Marine Systems Engineering, Seoul National University) ;
  • Oh, Dae-Kyun (Dept. of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Shin, Jong-Gye (Dept. of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Ryu, Cheol-Ho (Research Institute of Marine Systems Engineering, Seoul National University)
  • 하광철 (서울대학교 해양시스템공학연구소) ;
  • 이장현 (서울대학교 조선해양공학과) ;
  • 오대균 (서울대학교 조선해양공학과) ;
  • 신종계 (서울대학교 조선해양공학과) ;
  • 유철호 (서울대학교 해양시스템공학연구소)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

As the automation of ship production system proliferates, it is unavoidable to move the real machinery, facility, application software, and virtual environment from the heterogeneous data environment to the integrated one. However, it is a prevailing situation that each component operates under the different environment, due to the inability of interchanging the data in a structured manner between the components. The issue is obstacles to improvement of the application system. To facilitate seamless exchange of data among the manufacturing systems, STEP, PDML, and XML has been tried by other studies. This study has investigated how XML data can be applied to exchange the data among the ship production system components. XML data is applied to the forming shop in shipyard to overcome the present difficulties on sharing and exchanging of the information. An example of forming information is represented by XML to demonstrate the feasibility of the proposed approach. In addition, an application of XML information applicable to virtual factory and electronic work order sheet is included.

Keywords

References

  1. 고대은, 장창두, 서승일, 이해우, 1999,' 곡가공자동화 시스템을 위한 선상가열에 의한 변형의 실시간 시뮬레이션,' 대한조선학회 논문집, 제36 권, 제 4 호, pp. 116-128
  2. 류철호, 2002, 최소 변형률 에너지를 갖는 선체외판의 전개형상 알고리즘, 서울대학교 조선해양공학과 박사학위 논문
  3. 신동헌, 우종훈, 이장현, 신종계, 2002, ' 적응시스템 접근법을 이용한 조선소 가공공장 분석,' 대한조선학회 논문집, 제 39 권, 제 3 호, pp. 75-81
  4. 신종계, 이장현, 우종훈, 김용균, 이종무, 2002, ' 디지털생산을 위한 초기 모델 개발 소개 -조선소 성형공장을 중심으로-, ' 대한용접학회지 제 20 권 제 1 호, pp. 10-17
  5. 오대균, 송관형, 이종갑, 2002, ' 무선 프로그래밍을 활용한 XML 기반의 조선 PDM 구현에 관한 연구,' 대한조선학회 논문집, 제 39 권, 제 4호, pp. 54-60
  6. 이미숙, 2002, XML 을 이용한 기업 간 통합 비즈니스 프로세스의 자동 실행 방안, 서울대학교 산업공학과 석사학위 논문
  7. 이장현, 신종계, 2002, ' 유한요소해석과 다변수해석에 의한 선상가열 변형관계식,' 대한조선학회 논문집, 제 39 권, 제 2 호, pp. 69-80
  8. Burkett, W. C., 2001, ' Product data markup language: a new paradigm for product data exchange and integration,' Computer-Aided Design, Vol. 33, pp. 489-500
  9. Hardwick, M., Spooner, D. L., Rando, T. and Morris, K. C., 1996, 'Sharing Manufacturing Information in Virtual Enterprises, 'Communication of the ACM, Vol. 39, No.2, pp 46-54 https://doi.org/10.1145/230798.230803
  10. Shin, J. G., Ryu, C. H., Lee J. H. and Kim, W. D., 2003, ' User-Friendly, Advanced Line Heating Automation for Accurate Plate Forming,' Journal of Ship Production, Vol. 19 No. 1, pp. 8-15
  11. Yoo, S. B. and Kim, Y., 2002, ' Web-based knowledge management for sharing product data in virtual enterprises,' International Journal of Production Economics, Vol. 75, pp. 173-183