참고문헌
- Kahng, C. H., 1995, 'Machine Tool Technology; The present And The Future(4),' KSPE, Vol. 12, No.7, pp. 5-18
- Knapp, W., 1983, 'Test of the Three Dimensional Uncertainty of Machine Tools and Measuring Machines and Its Relation to the Machine Errors,' Annals. CIRP, Vol. 32, No.1 pp. 459-464 https://doi.org/10.1016/S0007-8506(07)63440-4
- Bryan, J. B., 1982, 'A Simple Method for Testing Measuring Machines and Machine Tools, Part 1,' Principle and Application Precision Eng., Vol. 4, No.2, pp. 197-203
- Park, J. H., 1993, Precision Measurement System Engineering, Yajeongmunhwasa, pp. 201-209
- Park, J. H., 1994, 'Positioning Error Measurement and Compensation Using Laser Interferometer,' KSME(A), Vol. 34, No.3, pp. 185-192
- Pahk, H. J., 1994, 'Development of Geometric Error Measurement System for Machine Tool Guideways Using Laser-Photo Diode,' KSME, Vol. 34, No.3, pp. 168-176
- Park, J. H., Lee, E. S., Yang, J. H., and Cho, S. H., 1994, 'Volumetric Error Compensation of a Coordinate Measuring Machine using a Software Method,' KSPE, Vol. 11, No.4, pp. 158-164
- Eom, T. B., Lim, J. S., Won, J. W., and Chung, M. S., 1985, 'The Development of the Small Angle Generator by using Laser Interferometer,' KSME, Vol. 9, No. 3, pp. 373-378
- Ahn, G. S., Jhang, K. Y., and Moon, H. K., 1996, 'Improvement of Measurement Accuracy for Absolute Height by Using Two Types of Doppler and Heterodyne Optical Interferometer,' KSPE, Vol. 13, No. 6, pp. 128-135
- Steinmets, C. R., 1990, 'Sub-micron Position Measurement and Control on Precision Machine Tools with Laser Interferometer,' Precision Engineering, Vol. 12, No.1, pp. 12-24 https://doi.org/10.1016/0141-6359(90)90004-I
- Hewellet Packard, 1993, 5519A Laser Measurement System User's Guide