Journal of Advanced Marine Engineering and Technology

  • 제28권7호
  • /
  • Pages.1092-1100
  • /
  • 2004
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지

스크루형 공기압축기의 고장진단

Fault Diagnosis of Screw type Air Compressor

  • 배용완 (안동대학교 기계교육과)
  • 발행 : 2004.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes the application of fault tree technique to analyze of compressor failure. Fault tree analysis technique involves the decomposition of a system into the specific form of fault tree where certain basic events lead to a specified top event which signifies the total failure of the system. In this research. fault trees for failure analysis of screw type air compressor are made. This fault trees are used to obtain minimal cut sets from system failure and system failure rate for the top event occurrence can be calculated. It is Possible to estimate air compressor reliability by using constructed fault trees through compressor failure example. It is Proved that FTA is efficient to investigate the compressor failure modes and diagnose system.

키워드

참고문헌

  1. Bhushan, M., Rengaswamy. R., 'Design of sensor network based on the signed directed graph of the process for efficient fault diagnosis,' Industrial and Engineering Chemistry Research, Vol. 39, No. 4, pp.999-1019, 2000 https://doi.org/10.1021/ie990383d
  2. Lou, S. J., Budman, H., Duever, T. A., 'Comparison of fault detection technique,' Journal of Process Control, Vol. 13, No. 5, pp.451-464, 2003 https://doi.org/10.1016/S0959-1524(02)00069-0
  3. Scattoloni, R., 'Fault identification: An approach based on propagation digraph,' International Journal of Systems Science, Vol. 31, No. 11, pp. 1489-1496. 2000 https://doi.org/10.1080/00207720050197857
  4. Bhushan, M., Rengaswamy, R., 'Design of sensor location based on various fault diagnostic observability and reliability criteria,' Computers and Chemical Engineering, Vol. 24, No. 2, pp. 735-741, 2000 https://doi.org/10.1016/S0098-1354(00)00331-8
  5. Basseville, M., Benveniste, A., 'Diagnosing hybrid dynamical systems: Fault graphs, statistical residuals and Viterbi algorithm,' Proceedings of the IEEE Conference on Decision and Control, Vol. 4, pp. 3757-3762, 1998
  6. Sehgal, R., Gandhi, O. P., Angra, S., 'Fault location of tribo-mechanical systems graph theory and matrix approach,' Reliability Engineering & System Safety, Vol. 70, No. 1, pp. I-14, 2000 https://doi.org/10.1016/S0951-8320(00)00021-1
  7. Mo, K. J., Oh, Y. S., Yoon. E. S., 'Development of operation-aided system for chemical processes,' Expert Systems with Applications, Vol. 12, No. 4, pp. 455-464, 1997 https://doi.org/10.1016/S0957-4174(97)00005-5
  8. Yang. S. K., Liu, T. S., 'Failure analysis for an airbag inflator by Petri net,' Quality and Reliability Engineering International, Vol. 13. No. 3, pp. 139-151, 1997 https://doi.org/10.1002/(SICI)1099-1638(199705)13:3<139::AID-QRE91>3.0.CO;2-P
  9. 이근철, FTA안전공학, 기전연구사, pp.39-67, 1990
  10. Baron. J. H., Nunez, J. E., Rivera, S. S., 'Risk- orient ed safety evaluation of the CAREM-25 prototype reactor,' Nuclear Technology, Vol. 134, No. 2, pp.97-109, 2001 https://doi.org/10.13182/NT01-A3189
  11. Fussell, J. B., 'Reliabili ty of sequential systems using the cause- consequence diagram method,' Proceedings of the Institution of Mechanical Engineers. Part E: Journal of Process Mechanical Engineering, Vol. 215, No. 3, pp.207-220, 2001 https://doi.org/10.1243/0954408011530451
  12. McNiff, B. P., Errichello, R. L., 'New guidelines promise reliable wind-turbine gearboxes,' Power Transmission Design. Vol. 39, No. 3, pp. 21-24. 1997
  13. 日本潤慣學會, 潤滑故障例とその對策, 養賢堂, pp.23-46, 1978
  14. Mayo, P. A., 'Designing reliability into industrial gear drive,' Gear Technology, Vol. 15, No. 5, pp.8, 1998
  15. 한국 GMB 베어링, '기술카타로그.' Korea GMB Industry Co., LTD. Bearing Division. pp.15-19, 1993
  16. Bae, Y. H., Lee , H. K., Lee, S. H. and Lee, S. J., 'Fault Diagnosis of Walking Beam Roller Bearing by FTA,' Journal of KSPE, Vol.11, No. 5, pp.110-123, 1994