압전 변압기를 이용한 LCD 백라이트 구동용 인버터 설계 절차

Design Procedure of the Inverter for LCD Backlight using Piezoelectric Transformer

  • 발행 : 2004.12.01

초록

액정 디스플레이의 백라이트에 사용되는 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp) 구동을 위해 압전 변압기(Piezoelectric Transformer)를 사용하였으며, 최적 파라미터를 선정하여 실험을 통해 검증하였다. 적용한 압전 인버터로는 푸시-풀(Push-Pull)회로와 하프-브리지(Half-Bridge) 회로이며, 휘도 제어기법으로는 각각 아날로그(Analog) 방식과 버스트(Burst) 방식을 사용하였다. 푸시-풀 인버터의 경우 아날로그 제어방식으로 제어전압 2.5-4.5V에서 출력전류 1-6mA로 휘도 0-100% 특성을 보였다. 입출력 효율로 90.3%를 얻었으며, 하프브리지 인버터에 적용한 버스트 제어방식에서는 듀티비 5-50%에서 1-6mA의 제어 성능을 보였으며, 인버터의 입출력 효율은 82.1%를 얻었다.

Optimal parameters were selected to design an inverter circuit that drives a cold cathode fluorescent lamp for LCD backlight using a piezoelectric transformer and it was verified by an experiment. In this paper, the applied inverter topologies are a push-pull type and a half-bridge type, and the dimming control methods of these drive system were used a analog control method and a burst control method each other. When change a control voltage from 2.5V to 4.5V in the analog control method, the brightness 0-100% was seen in current 1-6 mA. And, the input/output efficiency were obtained 90.3%. Also, the control performance of 1-6 mA was seen in duty ratio 5-50% in the burst control method, and the input/output efficiency of the designed inverter got 82.1%.

키워드

참고문헌

  1. 35-th ICAT Smart Actuator Symposium : Conference Note. April 18-19, 2002
  2. Chih yi Lin, 'Design and Analysis of Piezoelelctric Transformer Converters', Academic Press, 1997
  3. G. H. Kweon, Y. C. Lim, S. H. Yang. 'An analysis of the backlight inverter by topologies' IEEE, ISIE-2001
  4. Data sheet & User's Guide Note, Multi-Topology Piezoelectric Transformer Controller, Texas Instrument. January 2002