Abstract
Optimal parameters were selected to design an inverter circuit that drives a cold cathode fluorescent lamp for LCD backlight using a piezoelectric transformer and it was verified by an experiment. In this paper, the applied inverter topologies are a push-pull type and a half-bridge type, and the dimming control methods of these drive system were used a analog control method and a burst control method each other. When change a control voltage from 2.5V to 4.5V in the analog control method, the brightness 0-100% was seen in current 1-6 mA. And, the input/output efficiency were obtained 90.3%. Also, the control performance of 1-6 mA was seen in duty ratio 5-50% in the burst control method, and the input/output efficiency of the designed inverter got 82.1%.
액정 디스플레이의 백라이트에 사용되는 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp) 구동을 위해 압전 변압기(Piezoelectric Transformer)를 사용하였으며, 최적 파라미터를 선정하여 실험을 통해 검증하였다. 적용한 압전 인버터로는 푸시-풀(Push-Pull)회로와 하프-브리지(Half-Bridge) 회로이며, 휘도 제어기법으로는 각각 아날로그(Analog) 방식과 버스트(Burst) 방식을 사용하였다. 푸시-풀 인버터의 경우 아날로그 제어방식으로 제어전압 2.5-4.5V에서 출력전류 1-6mA로 휘도 0-100% 특성을 보였다. 입출력 효율로 90.3%를 얻었으며, 하프브리지 인버터에 적용한 버스트 제어방식에서는 듀티비 5-50%에서 1-6mA의 제어 성능을 보였으며, 인버터의 입출력 효율은 82.1%를 얻었다.