초록
슬롯리스 PM BLDC 전동기는 고속도, 고출력의 특징을 가지고 있어서 산업 및 공장자동화 기기분야에서 폭넓게 사용되고 있다. PM BLDC 전동기를 구동하려면 회전자 위치를 검출하는 센서가 필수적으로 요구된다. 홀 센서는 회전자의 위치를 판별하기 위한 것으로서 3상 PM BLDC 전동기의 경우 3개의 센서를 이용하는 것이 일반적인 방법으로 사용되어지고 있다. 그러나 본 논문에서는 기존의 회전자 위치 검출 시 1개의 홀 센서를 사용하여 기존의 방법과 동일한 성능을 가질 수 있음을 증명하였다. 그 결과 기존의 방법과 동일한 성능을 갖으며 저가격, 보호회로의 역할, 회로의 부피 감소의 효과를 얻을 수 있었으며 이를 시뮬레이션과 실험으로 증명하였다.
Slotless Permanent Magnet Brushless DC Motor(PM BLDC) with the characteristics of high speed and power density has been more widely used In Industrial and factory machine. Generally, PM BLDC meter is necessary that the three Hall-lCs evenly be distributed around the stator circumference in case of the 3 phase motor. The Hall-ICs are set up in PM BLDC Motor to detect the main flux from the rotor. therefore the output signal from Hall-ICs is used to drive a power transistor to control the stator winding current. However, instead of using three Hall-ICs, if it used only one Hall-IC, we can estimate information of the others phase in sequence through a rotor This paper identified the characteristics and performance by using one Hall-IC with the 3-phase, 2-pole, 6-slot PM BLDC motor.