참고문헌
- J.M. Miller, V.R. Stefanovic, D. Kak, D. Pelergus, ‘Progresses For Starter – Alternator Systems In Automotive Applications’, Record of EPE – PEMC – 2002, Dubrovnik & Cavtat, Croatia
- T. Teratani et al , ‘Development Of Toyota Mild Hybrid System (THM - M) With 42 V Power Net’, Record of IEEE – IEMDC – 2003, Vol 1, pp. 3 – 9
- J. Voelker, ‘Top 10 Tech Cars : Here Come The Hybrids’, IEEE Spectrum, March 2004,pp. 20 – 27
- I. Husain, ‘Electric And Hybrid Vehicles’, book, CRC Press, Florida, 2003
- W. Cawthorne, P. Famouri, N. Clark, ‘Integrated Design Of Linear Alternator/Engine System For HEV Auxiliary Unit’, Record of IEEE – IEMDC – 2001
- E.C. Losic, T.M. Lindback, W.M. Arshad, P. Telin, E. Nordlund, ‘ApplicationOf Free – Piston Generator In A Series Hybrid Vehicle’, Record of LDIA – 2003, Birmingan, UK, pp. 541 – 544
- E.C. Lovelace, T.M. Jahns , J.L. Kirtley, J.H. Lang, ‘An Interior PM Starter Alternator For Automotive Applications’, Record of ICEM – 1998, Instambul, Vol.3, pp. 1802 – 1808
- A. Vaggati, A. Fratta, P. Gagliehni, G. Franchi, F. Villata, ‘Comparison Of A.C. Motor Based Drives For Electric Vehicle Application’, Record of PCIM – 1999, Europe, Vol. IE, pp. 173 – 180
- A. Lange, W.R. Canders, F. Laube, N. Mosebach, ‘Comparisons of Different Drive Systems for A 75 KW Electrical Vehicle’, Record of ICEM – 2000, Espoo, Finland
- S. Scridon, I. Boldea, I. Tutelea, F. Blaabjerg, ‘BEGA –Biaxial Excitation Generator For Automobiles. Full Characterization And Testing’, Record of IEEE – IAS – 2004 Meeting
- S. Chen, B. Lequensne, R.R. Henry, Y. Xuo, J. Ronning, ‘Design And Testing Of Belt – Driven Induction Starter - Generator’, IEEE Trans., Vol. IA – 38, no. 6, 2002, pp. 1525 – 1532
- I. Boldea, S.A. Nasar, ‘Induction Machine Handbook’, book, CRC Press, Florida, 2001, pp.130
- I. Boldea, S.A. Nasar, ‘Electric Drives’, book, CRC Press, 1999
- I. Boldea, ‘Reluctance Synchronous Machine And Drives’, book, Oxford University Press, 1996
- I. Boldea, L. Tutelea, C. I. Pitic, ‘Characterization Of PM Assisted Reluctance Synchronous Motor/ Generator (PM-RSM) For a Mild Hybrid Vehicle’, IEEE Trans. Vol. IA-40, no2, 2004, pp.492 – 498
- H. Kim, K. K. Huh, H. Harke, J. Wai, R. D. Lorenz, T. Jahns, ‘Initial Rotor Position Estimation For an Integrated Starter-Alternator IPMSM’, Record of EPE-2003, Tolouse, France
- M. Schroedl, 'Sensorless Control of ac. Machines at Low Speed And Standstill Based On The INFORM Method', Record of IEEE-IAS, 1996, vol.1, pp. 270-277
- A. Consoli, G. Scarcella, A. Fratta, ‘Sensorless Control of PM Synchronous Motors At Zero Speed’, Record of IEEE-IAS-1999, vol. 2, pp.1033-1040
- Y. Yeong, R. D. Lorenz, T. M. Jahns, S. K. Sul, ‘Initial Rotor Position Estimation of IPMSM Using Carrier Frequency Injection Methods’, Record of IEEE-IEMDC, 2003, Vol. 2, pp. 1218-1223
- A. V. Radun , C. A. Ferreira, E. Richter, ‘Two Channel Switched Reluctance Starter-Generator Results’, IEEE Trans. Vol. IA-34, no 5, 1998, pp. 1026-1034
- H. Baush, A. Grief, K. Kanelis, A. Milke, ‘Torque Control Of Battery Supplied Switched Reluctance Drives For Electric Vehicle’, Record of ICEM-1998, Istambul, Vol 1, pp.229-234
- R. B. Inderka, R. W. De. Doncker, ‘Simple Average Torque Estimation for Control Of SRMs’, Record of EPE-PEMC, 2000, Kosice, Vol. 5, pp. 176-181
- M. S. Islam, M. N. Anwar, I. Hussain, ‘A Sensorless Wide-Speed Range RSM Drive With Optimally Designed Critical Rotor Angles’, Record of IEEEIAS, 2000, Rome
- K. M. Rahman, S. E. Schultz, 'High Performance Fully Digital Switched Reluctance Motor Controller For Vehicle Propulsion', IEEE Trans. Vol. IA-38, no 4, 2002, pp. 1062-1071
- R. B. Inderka, M., R. De. Doncker, ‘Control Of Switched Reluctance Drives For Electric Vehicle Applications’, IEEE Trans. Vol. IE-49, no 1, 2002, pp. 48-53
- M. Eshani, B. Fahimi, ‘Elimination Of Position Sensor In Switched Reluctance Motor Drives: State Of The Art And Future Trends’, IEEE Trans. Vol. IE-49, no 1, 2002, pp. 15-27
- T. J. E. Miller, ‘Optimal Design Of Switched Reluctance Motors’, IEEE Trans. Vol. IE-49, no 1, 2002, pp.15-27
- H. Weh, M. May, ‘Achievable Force Densities With PM Excited Machines In New Configurations’, Record of ICEM-1986, Munchen, Vol 3, pp. 1107-1011
- G. Hennenberger, I. A. Viorel, ‘Variable Reluctance Electrical Machines’, book, Shaker Verlag, Aachen, 2001, chapter 6
- A. Njeh, A. Masmoudi, A. El-Antably, ‘3D-FEM based Investigation of Cogging Torque of a Transverse Flux PM Machine’, Record of IEEEIEMDC- 2003, Vol.1, pp. 319-324
- J. Luo, S. Huang , S. Chen, T. A. Lipo, ‘Design and Experiments of a Novel Axial Circumpherential Current PM (AFCC0) Machine with Radial Airgap’, Record of IEEE IAS-2001 Annual Meeting
- I. Boldea, ‘Automotive Electric Generator Systems – a review’, Record of Electromotion 1999 Symposium, Patras, Greece
- W. Lee, M. Sunwoo, ‘Vehicle Electric Power Simulator for Optimizing the Electric Charging System’, International Journal of Automotive Engineering, Vol. 2, no 4, 2001, pp. 157-164
- T, Jahns, ‘Component Requirement for Wide Constant Power Operation of IPMSM Drives’, Record of IEEE-IAS, 2000, Rome
- W. L. Soong, M. Ertrugrul, ‘Field Weakening Performance of IPMSM’, Record of IEEE-IAS-2000, Rome