Measurement of Yield Strength for Electroplated Nickel Film Using Micro-cantilever

  • Moon, Hyoung-Sik (HMED LAB. Dept. of Electrical, Information and Control Engineering, Hongik University) ;
  • Kim, Jooh-Wan (HMED LAB. Dept. of Electrical, Information and Control Engineering, Hongik University) ;
  • Kim, Young-Min (HMED LAB. Dept. of Electrical, Information and Control Engineering, Hongik University)
  • 발행 : 2004.10.01

초록

We report highly improved yield strength of nickel thin film, prepared using electroplating. The micro-scaled nickel cantilever is found to have significantly higher yield strength than bulk nickel. For the yield strength test, the heights of the micro-scaled cantilever were varied up to 60 ${\mu}{\textrm}{m}$ and electrostatic force was used for actuation. Stress of the bent cantilever was estimated using the FEM large deflection model. The yield strength of the thin nickel film is found to be over five times higher than that of the bulk nickel previously published. Results from this study indicate that metal microstructures can be used for MEMS applications requiring large deflection.

키워드

참고문헌

  1. Lopez, D. 'Monolithic MEMS optical switch with amplified out-of-plane angular motion.' Optical MEMs, 2002. Conference Digest. 2002 IEEE/LEOS International Conference on , 20-23 Aug. 2002, Pages:165–166
  2. Gabriel M. Rebeiz, 'RF MEMS theory, design, and technology', WILEY, pp.137-139
  3. Despont, M.; Takahashi, H. 'Dual-cantilever AFM probe for combining fast and coarse imaging with high-resolution imaging', Micro Electro Mechanical Systems, 2000. MEMS 2000. The Thirteenth Annual International Conference on , 23-27 Jan. 2000
  4. Rob Legtenberg, et al, J of Microelectro-mechanical Systems, Vol. 6(1997) P. 257-265
  5. Harald Schenk, IEEE Journal of Selected Topics in Quantum Electronics, Vol. 6, No. 5, September /October 2000
  6. Takashi MATSUNAGA, et al, Jpn. J. Appl. Phys. Vol. 39 (2002) p. 4327-4331
  7. S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, 1959
  8. T.Buchheit, T.Christensin, D.Schmale, and D.Lavan, 'Understanding and tailoring the mechanical properties of LIGA fabricated materials,' in MRS Symposium Proceedings, vol. 546, 1998, p.121-126
  9. Kristian P.Larsen, et al, 'MEMS device for bending test: measurements of fatigue and creep of electroplated nickel', Sensors and Actuators A 103 (2003), p.156-164
  10. T.Fritz, et al, 'Mechanical Properties of Electroplated Nickel', Techn.Dig.Micro Materials Micro Mat 2000, 3rd International Conference and Exhibition, Berlin, Germany, April 17-19 (2000), 752-755
  11. Philip A.Schweitzer, P.E, 'Metallic Materials', Marcel Dekker,Inc., p. 272
  12. J. Jin and Z. Zhou, 'Simulation and Modeling of a Micro Pressure Sensor Array', Nanotech 2002 Vol. 1, p.306-309