한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제21권10호
  • /
  • Pages.154-161
  • /
  • 2004
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

Stereo Vision과 디지털 화상상관법을 이용한 파괴시험편의 측면 함몰의 현장 측정

In situ Measurement of Lateral Side-Necking of a Fracture Specimen Using a Stereo Vision and Digital Image Correlation

  • 이정현 (전남대학교 대학원 기계공학과) ;
  • 강기주 (전남대학교 기계시스템공학부)
  • 발행 : 2004.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An experimental method for measuring side-necking deformation near a crack-tip is described. It is based on Stereoscopic Digital Speckle Photography and Digital Image Correlation, and it is simple and robust to mechanical vibration inherent to a hydraulic material test system. The validity and accuracy are evaluated through a calibration fur rigid body translation. A case study has been performed for a CT specimen made of a ductile steel and the three dimensional profiles of the side-necked region are presented as the load increases. Also, the details of the procedure and the surface treatment are discussed.

키워드

참고문헌

  1. Kim, D. H., Lee, J. H. and Kang K. J., 'An Experimental Method for Measuring Q,' Tran. of KSME, Vol. 27, 9, 1607-1613, 2003
  2. Kim, D. H., Lee, J. H. and Kang K. J., 'An Experimental Method to Measure Q-parameter for Two Parameter Theory of Ductile Fracture,' Proceedings of IMECH'03, 2003 ASME International Mechanical Engineering Congress & Exposition, Washington, D.C., November 16-21, 2003
  3. Shoji, T., 'Evaluation of Intense Strain Region at Crack Tip in Fracture Toughness Testing,' Non Destructive Evaluation, Vol.28, 1978. (in Japanese)
  4. Shoji, T., 'Deformation of Crack Tip Energy Dissipation and Elastic-Plastic Toughness Parameter with Ductile Crack Extension,' Journal of Testing and Evaluation, Vol. 6, pp. 324-334, 1981
  5. Kim, K. S., 'A Stress Intensity Factor Tracer,' Journal of Applied Mechanics, Vol. 52, pp. 291-297, 1985 https://doi.org/10.1115/1.3169043
  6. Pardoen, T., Marchal, Y. and Delannay, F., 'Thickness Dependence of Cracking Resistance in Thin Aluminum Plates', Journal of the Mechanics and Physics of Solids, Vol. 47, pp. 2093-2123, 1999 https://doi.org/10.1016/S0022-5096(99)00011-3
  7. Kim, D. H., 'Speckle Interferometric Detection of Defects on the Backside of Steel Plate,' Proceedings KSPE Spring Annual Meeting, pp. 195-198, 2001
  8. Yamaguchi, I., 'A Laser-Speckle Strain Gauge,' J. Phys. E: Sci. Instrum., Vol.14, pp. 1270-1273, 1981 https://doi.org/10.1088/0022-3735/14/11/012
  9. Johnson, P., 'Strain field measurements with dual-beam digital speckle photography,' Optics and Lasers in Engineering, Vol.30, pp.315-326, 1998 https://doi.org/10.1016/S0143-8166(98)00021-9
  10. Kim, J. H., Moon, H. J and Earmme, Y. Y., 'A Study on Measurement of Mechanical Properties of Thin Membrane Using Moire Method,' Proceedings KSME Spring Annual Meeting A, pp. 19-24, 1996
  11. Synnergren, P. and Sjodahl, M., 'A stereoscopic digital speckle photography system for 3-D displ. Field measurements,' Optics and Lasers in Engineering, Vol. 31, pp. 425-443, 1999 https://doi.org/10.1016/S0143-8166(99)00040-8
  12. Lee, J. H., Jeon, M. C. and Kang, K. J., 'Evaluation of Displacement Measurement Technique Using Laser Speckle and Digital Image Correlation Method,' Journal of the Korean Society of Precision Engineering. Vol. 20, No. 6, pp. 47-54, 2003
  13. Sutton, M. A., Cheng, Minggi, Peters, W. H. Chao, Y. J. and Mcneil, S. R., 1986, 'Application of an Optimized Digital Correlation Method to Planar Deformation Analysis,' Image and Vision Computing, Vol. 4, No. 3, pp. 143-150 https://doi.org/10.1016/0262-8856(86)90057-0
  14. Schreier, H.W., Braasch, J. R. and Sutton, M. A., 'Systematic errors in digital image correlation caused by gray-value interpolation,' Opt. Eng. 39, pp.2915-2921, 2000 https://doi.org/10.1117/1.1314593
  15. Kim, H. J., Kim, D. H., Yang, K. J. and Kang, K. J., 'Variation of $A_2$ with Crack Propagation in a Ductile Metal; Experimental Evaluation,' Transaction of the Korean Society of Mechanical Engineering. Vol. 27, pp. 119-125, 2000 https://doi.org/10.3795/KSME-A.2003.27.1.119
  16. Kim, S. Y., Kang, K. J. and Jeung, D. Y., 'Estimation of Crack Initiation with DCPD Method on Dynamic Fracture Testing of Ductile Materials,' Proceedings KSME Spring Annual Meeting A, pp. 147-152, 1999