사출금형 사상공정의 체계화

Systematic Finishing Process of Injection Molds

  • 박민수 (서울대학교 기계항공공학부) ;
  • 김민태 (서울대학교 기계항공공학부) ;
  • 이해성 (서울대학교 기계항공공학부) ;
  • 주종남 (서울대학교 기계항공공학부)
  • 발행 : 2004.10.01

초록

Finishing is the final process in molds manufacturing and consumes much process time. Also, it influences on surface quality of molds. But, there are few systematic methods to control the process. In this work, basic experiments were carried out to study the machining characteristics of the finishing tools. From the experiments, critical surface roughness and wear coefficient are suggested to reduce the number of finishing steps and to plan a systematic finishing procedure. Comparison experiments were carried out between the expert's method and the new method, which is based on the results of this research. From the experiments, it is verified that the systematic method takes less time and generates less form error in the machined surface than the worker's method.

키워드

참고문헌

  1. Schulz, H. and Hock, S., 'High-Speed Milling of Dies and Moulds - Cutting Conditions and Technology,' Annals of the CIRP, Vol. 44, pp. 35-38, 1995 https://doi.org/10.1016/S0007-8506(07)62270-7
  2. Yang, M. and Lee, H., 'A study on PC-NC Based Aspherical Lens Polishing System with Minimum Translation Mechanism,' Journal of the Korean Society of Precision Engineering, Vol. 18, No. 7, pp. 65-71, 2001
  3. Yang, M. and Lee, H., 'The development of CAM Software for Ultra-precision Aspheric Surface,' Journal of the Korean Society of Precision Engineering, Vol. 19, No. 4, pp. 79-86, 2002
  4. Altan, T. and Lilly, B. W., 'Advanced Techniques for Die and Mold Manufacturing,' Annals of the CIRP, Vol. 42, pp. 41-61, 1993
  5. Lilly, B. W., Bailey, R. W. and Altan, T., 'Automated Finishing of Dies and Molds: A State of the Art Review,' Proc. of ASME Winter Annual Meeting, Chicago, 11/27-12/2, pp. 75-90, 1988
  6. Kim, M., 'Pattern Characteristics and Time Estimation in Manual Finishing Process of Ball End Milled Surface,' M.S. thesis school of Mech. And Aero. Eng. Seoul National University, 2000
  7. Rabinowicz, E., 'Friction and Wear of Materials,' John Wiley & Sons, Inc., 2nd ed., pp. 124-190, 1995
  8. Eyre, T. S., 'Wear Characteristics of metals,' Tribology International, Vol. 10, pp. 203-212, 1976 https://doi.org/10.1016/0301-679X(76)90077-3
  9. Mulhearn, T. O. and Samuels, L. E., 'The Abrasion of Metals: A Model of the Process,' Wear, Vol. 5, pp. 478-498, 1962 https://doi.org/10.1016/0043-1648(62)90064-9