Abstract
For designing a reliable harbor, a methodology for estimating design waves of 97.5% operable harbor condition is suggested using long-term wave data. For a practical application of the methodology, a marine police harbor was selected as a site. Wave data used were collected from February 1993 to December 2003 at Jodo wave gage station in front of Pusan harbor. Joint distributions of significant wave height and significant wave period for specified wave directions were obtained and used to feed as input waves for parabolic mild-slope wave model. Results showed that input waves with significant wave height of 1.75 m, significant wave period off sec and wave direction E yield design waves height of 1.06 m at the site of interests, which is a 97.5% operable harbor condition. Wind waves generated inside harbor showed to be no effect on the design wave condition. Swells propagated from deep water into harbor are shown to be dominant effects on the design waves of operable harbor condition.
본 논문에서는 장기간 측정된 파랑자료를 이용하여 신뢰성 있는 항만설계를 하기 위한 평상파 산정에 대한 방법론을 제시하였다. 제안된 방법론을 부산항 내 해경부두 설계에 적용하여, 부산항 입구 조도 전면해상에서 장기간 측정된 파랑자료를 이용하여 97.5% 평상파를 산정하였다. 1993년 2월부터 2002년 12월까지 측정된 파랑자료를 파향별로 유의파고와 유의파주기의 결합분포를 구한 후, 포물선형 완경사 방정식 파랑모델을 이용하여 해경부두에서의 평상파 조건을 산정하였다. 해경부두 위치에서의 항만설계를 위한 97.5% 평상파의 파고는 1.06 m 이며, 이는 부산항 항외에서 입사되는 파향 E, 유의파고 1.75 m, 유의파주기 7 sec에 의해 생성되는 것으로 분석되었다. 부산항 내 풍파에 의한 평상파에의 영향을 검토하였으나, 항내 풍파는 평상파 산정에 영향이 없으며 항외에서 항내로 진입하는 너울성 파고의 영향이 지배적임이 밝혀졌다. 따라서 항내의 풍파의 영향만을 고려하여 평상파를 추정하였을 경우 심각한 오류가 있음을 알 수 있었다.