Analytical Science and Technology (분석과학)

The Korean Society of Analytical Sciences (한국분석과학회)
권호 표지

Analytical Study for an Acrylic Coating

아크릴 코팅의 성분 분석 연구

  • Kim, Seog-Jun (School of Material Science & Chemical Engineering, Kunsan National University)
  • 김석준 (군산대학교 공과대학 재료.화학공학부)
  • Received : 2004.01.15
  • Accepted : 2004.02.17
  • Published : 2004.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, $^1H$ NMR spectroscopy and HPLC were used to identify the type and quantity of each component in an acrylic coating materials applied for an automotive part. By the $^1H$ NMR analysis, it was found that this acrylic coating contained about 88.40 wt% of poly methyl methacrylate (PMMA), 7.05 wt% of methyl methacrylate (MMA), and 2.36 wt% of allyl methacrylate. Polymer additives such as a benzotriazole light stabilizer (Hisorb 328), an oxanilide light stabilizer, butylated hydroxy toluene (BHT), and dimethyl phthalate (DMP) were also identified and measured quantitatively from the $^1H$ NMR spectra. However, only two light stabilizers were identified by reverse phase (RP) HPLC analysis using Bondapak C18 column, methanol mobile phase, and a PDA (Photodiode array) detector. The contents of two light stabilizers in the acrylic coating were measured by a quantitative analysis through UV-Vis spectroscopy and compared with the NMR data. The analytical informations from $^1H$ NMR spetra were better than those from HPLC-PDA plot.

본 연구에서는 $^1H$ NMR 분광분석법 및 HPLC를 이용하여 자동차 부품에 사용된 아크릴 코팅의 성분 및 함량을 분석하였다. $^1H$ NMR 분석 결과 아크릴 코팅은 88.40 wt%의 PMMA, 7.05 wt%의 MMA 및 2.36 wt%의 allyl methacrylate를 포함하고 있다. 또한, 고분자 첨가제로 벤조트리아졸 (Hisorb 328) 및 oxanilide 광안정제, BHT 및 DMP가 $^1H$ NMR 스펙트럼에서 확인되었고 정량적으로 측정되었다. 그러나, Bondapak C18 칼럼, 메탄올 이동상, PDA 검출기를 사용한 역상 HPLC 분석을 통해서는 두개의 광안정제만이 확인되었다. 두 광안정제의 함량은 UV-Vis 흡광광도계를 이용한 정량분석법을 통해 측정되고 NMR 분석 결과와 비교하였다. $^1H$ NMR 스펙트럼으로부터 얻은 분석 정보들이 HPLC에서 얻는 것들 보다 우수하였다.

Keywords

References

  1. F. Gugumus, 'Plastics Additives', 3rd Ed., Oxford Univ. Press, New York, U.S.A., 1990.
  2. R. Gachter and H. Muller, 'Plastics Additives Handbook', 3rd Ed., Oxford University Press, New York, U.S.A., 1990.
  3. T. R. Crompton, 'Practical Polymer Analysis', Plenum Press, New York, U.S.A., 1993.
  4. H. L. Spell and R. D. Eddy, Anal. Chem., 32(13), 1811-1814(1960).
  5. M. Vitali, Polymer Testing, 20, 741-748(2001).
  6. F. C. Schilling and V. J. Kuck, Polymer Degradation and Stability, 31(2), 141-152(1991).
  7. J. C. J. Bart, Polymer Testing, 20, 729-740(2001).
  8. H. El Mansouri, N. Yagoubi, and D. Ferrier, Chromatographia, 48, 491-496(1998).
  9. G. Dorner and R. W. Lang, Polymer Degradation and Stability, 62, 431-440(1998).
  10. M. Ashraf-Khorassani, N. Nazem, and L. T. Taylor, J. Chromatography A, 995, 227-232(2003).
  11. L. Y. Zhou, M. Ashraf-Khorassani, and L. T. Taylor, J. Chromatography A, 858, 209-218(1999).
  12. D. Stapel and A. Benninghoven, Applied Surface Science, 174, 261-270(2001).
  13. S. J. Wright, M. J. Dale, P. R. R. Langridge-Smith, Q. Zhan, and R. Zenobi, Anal. Chem., 68, 3585-3594(1996).
  14. Q. Zhan, R. Zenobi, S. J. Wright, and P. R. R. Langridge-Smith, Macromolecules, 29, 7865-7871(1996).
  15. F. Leis, H. E. Bauer, L. Prodan, and K. Niemax, Spectrochimica Acta Part B, 56, 27-35(2001).
  16. H. V. Drushel and A. L. Sommers, Anal. Chem., 36(4), 836-840(1964).
  17. W. He, R. Shanks, and G. Amarasinghe, Vibrational Spectroscopy, 30, 147-156(2002).
  18. C. A. Wilkie, Polymer Degradation and Stability, 66, 301-306(1999).
  19. F. C.-Y. Wang, J. Chromatography A, 883, 199-210(2000).
  20. F. C.-Y. Wang, J. Chromatography A, 886, 225-235(2000).
  21. F. C.-Y. Wang and W. C. Buzanowski, J. Chromatography A, 891, 313-324(2000).
  22. F. C.-Y. Wang, J. Chromatography A, 891, 325-336(2000).
  23. O.-W. Lau and S.-K. Wong, J. Chromatography A, 882, 255-270(2000).
  24. M. Wolf, M. Riess, D. Heitmann, M. Schreiner, H. Thoma, O. Vierle, and R. van Eldik, Chemosphere, 41, 693-699(2000).
  25. S. Nakamura, M. Takino, and S. Daishima, J. Chromatography A, 912, 329-334(2001).
  26. M. Herrera, G. Matuscheck and A. Kettrup, J. Anal. Appl. Pyrolysis, 70, 35-42(2003).
  27. J. D. Vargo and K. L. Olson, Anal. Chem., 57, 672-675(1985).
  28. J. C. J. Bart, Polymer Degradation and Stability, 82(2), 197-205(2003).
  29. S. J. Kim, Analytical Science & Technology, 13(3), 282-290(2000).
  30. USP (미합중국 특허) 3906033 to Ciba-Geigy A.G.(1975).
  31. USP 5698732 to GE Co.(1997).
  32. K. J. Saunders, 'Organic Polymer Chemistry', 2nd Ed., Chapman and Hall, New York, U.S.A., 1988.
  33. E. G. Crispim, I. T. A. Schuquel, A. F. Rubira, and E. C. Muniz, Polymer, 41, 933-945(2000).
  34. C. J. Pouchert and J. Behnke, 'The Aldrich Library of 13C and 1H FT NMR Spectra', Edition I, Vol. 1, 997, Aldrich Chemical Company, Inc., U.S.A., 1993.
  35. A. S. Wingrove and R. L. Caret, 'Organic Chemistry', 648, Harper & Row, New York, U.S.A., 1981.
  36. J. F. Rabek, 'Experimental Methods in Polymer Chemistry', John Wiley & Sons, New York, U.S.A., 1980.
  37. R. Iyengar and B. Schellenberg, Polym. Degrad. Stab., 61, 151-159(1998).
  38. J. Keck, G. J. Stuber, and H. F. A. Kramer, Angewanndte Makromolekulare Chemie, 252, 119-138(1997).