초록
원자력발전소 운전에 따른 경년열화 등에 의하여 원자력발전소 주요 기기 및 재료 등에 손상 발생 가능성이 있어 원자력법 및 관련 기술기준에서는 비파괴검사 방법을 이용하여 원자력발전소 주요 기기 및 배관의 용접부 등 취약 부위에 대한 건전성을 주기적으로 평가토록하고 있다. 이에 따라, 영광 6호기 가동중검사는 기기, 배관 및 구조물 비파괴검사, 압력용기 자동 초음파탐상검사, 원자로 내부 구조물 육안검사 및 증기발생기 전열관 와전류탐상검사로 구분하여 수행하였다. 원자력발전소 계통의 주요기기에 대한 비파괴검사 결과, 기기, 배관 및 구조물과 원자로 압력용기 용접부에 대해서는 특이 사항 발생 없이 적용 규격에 만족되고 건전한 것으로 최종 평가되었다. 특히, 배관 용접부에 대한 초음파탐상검사는 영광 5호기에서와 마찬가지로 ASME Code Sec. XI 1995년도 판에 따라 기량검증(Performance Demonstration : PD) 방법을 적용함으로써 검사 신뢰도를 확보하였다는데 큰 의미가 있다.
As the increase of the operation year of nuclear power plants, the probabilities of the degradation of the major facilities and materials in the nuclear power plants are increased. The integrity of those facilities shall be monitored and verified by the non-destructive examination methods with the regulation codes, so called inservice inspection(ISI). The ISI of Yonggwang unit 6 was performed in four different parts, 1) non-destructive examinations for the components, piping weldments and structures, 2) automated ultrasonic examinations for pressure vessels, 3) visual examinations for the interior structures of the reactor, 4) eddy current examinations for the steam generator tubes. As the results, there was no severe indication and all detected indications were evaluated as non-relavent. Especially for the examinations of the piping weldments, PD(Performance Demonstration) was applied as a W examination method defined in the 1995 edition of ASME Code Sec. XI. The implementation of the PD for the piping weld results in an improvement of the reliability of the UT examinations.