DOI QR코드

DOI QR Code

저마찰을 위한 Micro-Scale Surface Texturing의 실험적 연구

Experimental Study on Micro-Scale Surface Texturing for Friction Reduction

  • 채영훈 (경북대학교 트라이볼로지연구소)
  • 발행 : 2004.10.01

초록

The aim of this paper is to investigate the effect of surface texturing on reduction friction and to understand the potential of friction reduction through micro-scale dimple to fabricate by photolithography on pin-on-disk test using flat-on-flat contact geometry. It was verify that the friction property with respect to the same pitch has been influence on the size of dimple under lubricated sliding contact. Also, we can recognize from Stribeck curve that the friction property has a connection with the size of dimple. It can explain a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. The friction property has been an effect on the size of surface texture on reduction friction, not only because the density of dimple, but also because the ratio of diameter/pitch. This ratio of approximately 0.5 recommend under the tested friction condition. It suggested that the ratio of d/p is an important parameter for surface texture design.

키워드

참고문헌

  1. Nakada, N., 'Trends in Engine Technology and Tri-bology,' Tribology International, Vol. 27, No. 1, pp.3-8, 1994
  2. Gryk,Y.K. and Etsion, I., 'Experimental Investigationof Laser Surface Texturina for Reciprocating Auto-motive Components,' Tribology Transactions, Vol.45, No. 4, pp. 444-449, 2002
  3. Etion, I, Kligerman, Y. and Halperin, G., 'Analyticaland Experimental Investigation of Laser-TexturedMechanical Seal Faces,' Tribology Transactions, Vol.42, No. 3, pp.511-516, 1999
  4. Tian, H., Saka, N. and Suh, N.P., 'Boundary Lubri cation Studies on Undulated Titanium Surfaces,' Tri-bology Transactions, Vol. 32, No. 3, pp. 289-296, 1989
  5. Etsion, I. and Burstein, L., 'A Model for Mechani-cal Seals with Regular Microsurface Structure,' Tri-bology Transactions, Vol. 39, No. 3, pp. 677-683,1996
  6. Wang, X., Kato, K., Adachi, K. and Aizawa, K.,'The Effect of Laser Texturing of SiC Surface on theCritical Load for the Transition of Water LubricationMode from Hydrodynamic to Mixed,' TribologyInternational, Vol. 34, pp. 703-711, 2001
  7. Etson, I. and Halperin, G., 'A Laser Surface Tex-tured Hydrostatic Mechanical Seal,' Tribology Trans-action, Vol. 45, pp. 430-434, 2002
  8. Wang, X., Kato, K. and Adachi, K., 'The Lubrica-tion Effect of Micro-Pits on Parallel Sliding Faces ofSiC in Water,' Lubrication Engineering, Aus., pp. 27-34, 2002
  9. Ronen, A., Etsion, I. and Kligerman, I., 'Friction-reducing Surface-Texturing in Reciprocating Auto-motive Components,' Tribology Transaction, Vol. 44,No. 3, pp. 359-366, 2001
  10. 채영훈, '가공면 고평탄화 방법 및 장치,' 특허출원번호10-2004-43066, 2004
  11. Wakuda, M., Yamauchi, Y., Kanzaki, S. and Yasuda,Y., 'Effect of Surface Texturing on Friction Reduc-tion between Ceramic and Steel Materials underLubricated Sliding Contact,' Wear, Vol. 254, pp. 356-363. 2003