Abstract
The polymer blends of waste poly(vinyl chloride) (RPVC) and waste polyethylene (RPE) were prepared by melt mixing. Various ethylene-vinyl acetate copolymers (EVA) and ethylene-methacrylic acid Na salt copolymer (ionomer) were used as compatibilizer. Their morphologies and mechanical properties were evaluated as a funtion of mixing sequence and time. EVA with high vinyl acetate contents showed a rapid increment of tensile properties when small amount was added. Tensile properties of the blends were gradually increased with the addition of ionomer. Morphologies of RPVC/RPE blends were analyzed by scanning electron microscopy. FT-IR data showed that EVA was a good compatibilizer in RPVC/RPE blend compared to ionomer. Mechanical properties of the blends were highly enhanced when RPVC and compatibilizer were mixed and first RPE was added later.
폐폴리(염화 비닐) 수지 [waste poly(vinyl chloride), RPVC]와 폐폴리에틸렌 수지 (waste polyethylene, RPE)의 용융 블렌드에 대한 연구로 상용성 향상을 위해 비닐 아세테이트 함량이 다른 4종류의 에틸렌 비닐 아세테이트 공중합체 (EVA)와 에틸렌 메타크릴산 나트륨염 공중합체 (이오노머)를 상용화제로 사용하였으며, 혼합 순서 및 횟수를 변화시키며 물성의 변화를 조사하였다. 비닐 아세테이트의 함량이 높은 EVA가 상용화제로 첨가되었을 경우, 소량 첨가시 큰 인장 강도의 변화를 확인할수 있었으며 이오노머의 경우에는 첨가되는 양에 따라 인장 강도가 서서히 증가되는 경향을 관찰할 수 있었으며, 이러한 결과는 형태학적 특성 변화를 관찰하여 확인할 수 있었다. 블렌드에서의 상용화제의 종류에 따른 상용성은 적외선 분광기를 사용하여 관찰하였으며, 기계적 물성 분석을 통해 EVA 첨가시 이에 따른 인장 강도의 증가를 확인 할 수 있었다. 또한, 혼합 순서 및 횟수 변화에 따른 물성의 변화를 확인하였다.