DOI QR코드

DOI QR Code

광중합형 구치부 수복재료의 중합 수축력과 교두 변위의 상관관계

MEASUREMENTS OF SHRINKAGE STRESS AND REDUCTION OF INTER-CUSPAL DISTANCE IN MAXILLARY PREMOLARS RESULTING FROM POLYMERIZATION OF COMPOSITES AND COMPOMERS

  • 이순영 (연세대학교 치과대학 치과보존학교실) ;
  • 박성호 (연세대학교 치과대학 치과보존학교실)
  • Lee, Soon-Young (Department of Conservative Dentistry, College of Dentistry, Yonsei University) ;
  • Park, Sung-Ho (Department of Conservative Dentistry, College of Dentistry, Yonsei University)
  • 발행 : 2004.07.01

초록

The purpose of present study was to evaluate the polymerization shrinkage stress and cuspal deflection in maxillary premolars resulting from polymerization shrinkage of composites and compomers. Composites and compomers which were used in this study were as follows: Dyract AP, Z100, Surefil. Pyramid, Synergy Compact, Heliomolar, Heliomolar HB, and Compoglass F. For measuring of polymerization shrinkage stress, Stress measuring machine (R&B, Daejon, Korea) was used. One-way ANOVA analysis with Duncan's multiple comparison test were used to determine significant differences between the materials. For measuring of cuspal deflection of tooth, MOD cavities were prepared in 10 extracted maxillary premolars. And reduction of intercuspal distance was measured by strain measuring machine (R&B, Daejon, Korea) One-way ANOVA analysis with Turkey test were used to determine significant differences between the materials. Polymerization shrinkage stress is $\mathbb{\ulcorner}$Heliomolar, Z100, Pyramid < Synergy Compact Compoglass F < Dyract AP < Heliomolr HB, surefil$\mathbb{\lrcorner}$ (P < 0.05). And cuspal delfelction is $\mathbb{\ulcorner}$Z100, Heliomolar, Heliomolar HB, Synergy Compact Surefil. < Compoglass F < Pyramid, Dyract AP$\mathbb{\lrcorner}$ (P < 0.05). Measurements of ploymerization shrinkage stress and those of cuspal deflection of the teeth was different. There is no correlation between polymerization shrinkage stress and cuspal deflection of the teeth(p > 0.05).

키워드

참고문헌

  1. Baush JR , de Lange K, Davidson CR, Peters A and De Gee AJ. Clinical significance of polymerization shrinkage of composite resins. J Prosthet Dent 48:59-67, 1982 https://doi.org/10.1016/0022-3913(82)90048-8
  2. Eick JD and Welch FH. Polymerization shrinkage of posterior composites resins and its possible influence on postoperative sensitivity. 17:103-111, 1986Quint Int
  3. Kemp-Scholte CM and Davidson CL. Marginal sealing of curing contractions gaps in class V composite resin restorations. J Dent Res 67:841-845, 1988 https://doi.org/10.1177/00220345880670050901
  4. Robert JC, Powers JM and Craig RG. Fracture tough ness of composite and unfilled restorative resins. J Dent Res 56:748, 1977
  5. Feilzer AJ, De Gee AJ and Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66: 1636-1639, 1987 https://doi.org/10.1177/00220345870660110601
  6. Feilzer AJ, De Gee AJ and Davidson CL. Increased wall to wall curing contraction in thin bonded resin layers. J Dent Res 68:50-58. 1989
  7. Hansen EK. Effect of cavity depth and application technique on marginal adaptation of resins in dentin cavities. J Dent Res 65(11):1319-1321, 1986 https://doi.org/10.1177/00220345860650110701
  8. Krejci I. Sperr D and Lutz F. A three-sited light curing technique for conventional Class II composite restoraions. Quint Int 18:125-131, 1987
  9. Lutz F, Krejci I and Barbakow F. The importance of proximal curing in posterior composite resin restorations. Quint Int 23:605-609, 1992
  10. Kejci I. Lutz F. Marginal adaptation of class V restorations using different restorative technique. J Dent 19:24-32, 1991 https://doi.org/10.1016/0300-5712(91)90032-T
  11. McCullok A, Smith B. In vitro studies of cuspal movement produced by adhesive materials. Br Dent J 161:405-409, 1986 https://doi.org/10.1038/sj.bdj.4805990
  12. Park SH, Krejci I and Lutz F. Consistency in the amount of linear polymerization shrinkage in syringe type composite. Dent Mater 442-446, 1999
  13. Park SH, Krejci I and Lutz F. A comparison of micro-hardness of resin composites polymerized by plasma arc or conventional visible light curing. Oper Dent 27:30-37, 2002
  14. Suliman AA, Boyer DB and Lakes RS. Cusp movement in premolars resulting from composite polymerization shrinkage. Dent mater 9:6-10, 1993 https://doi.org/10.1016/0109-5641(93)90096-9
  15. Ericson D, Paulsson L, Sowaik H, and Derand T. Reduction of cusp deflection resulting from composite polymerization shrinkage, using a light-transmitting cone. Scand J Dent Res 102:244-248, 1994
  16. Park SH, Lee SY, Cho YS and Kim SS. Amount of polymerization shrinkage stress in composites and compomers for posterior restoration. J Kor Acad Consev Dent 28:354-348-353, 2003 https://doi.org/10.5395/JKACD.2003.28.4.354
  17. Lim BS, Ferracane JL, Sakaguchi RL and condon JR, Reduction of polymerization contraction stress for dental composites by two-step light activation. Dental Mater 18:436-444, 2002 https://doi.org/10.1016/S0109-5641(01)00066-5
  18. Jacobsen PH. The polymerization shrinkage of composite resins. Dent Mater 5:41-44, 1989 https://doi.org/10.1016/0109-5641(89)90092-4

피인용 문헌

  1. Correlation between Linear polymerization shrinkage & tooth cuspal deflection vol.30, pp.6, 2005, https://doi.org/10.5395/JKACD.2005.30.6.442
  2. Correlation Between the Amount of Linear Polymerization Shrinkage and Cuspal Deflection vol.31, pp.3, 2006, https://doi.org/10.2341/05-46
  3. The effect of intermittent composite curing on marginal adaptation vol.32, pp.3, 2007, https://doi.org/10.5395/JKACD.2007.32.3.248
  4. Effect of intermittent polymerization on the rate of polymerization shrinkage and cuspal deflection in composite resin vol.33, pp.4, 2008, https://doi.org/10.5395/JKACD.2008.33.4.341