Journal of Energy Engineering (에너지공학)

The Korean Society for Energy (한국에너지학회)
권호 표지

A Study on the Performance Improvement in a V8 Type Turbocharged Intercooler D.I. Diesel Engine

V8형 터보차져 인터쿨러 직접분사식 디젤기관의 성능개설에 관한 연구

  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is experimentally to analyze that intake port swirl, injection system and turbocharger have an effect on the engine performance and the emission characteristics in a V8 type turbocharged intercooler D.I. diesel engine of the displacement 16.7ι, and to suggest the improvement of engine performance. Generally to enhance engine power, TCI diesel engine is put to practically use turbo-charged intercoler in order to increase boost efficiency which is cooled boost air. As results of considering the factors of the intake port of swirl ratio 2.25, compression ratio 17.5, re-entrant 8.5$^{\circ}$ combustion bowl, nozzle hole diameter ${\Phi}$0.33*3+${\Phi}$0.35*2, nozzle protrusion 3.18mm, injection timing BTDC 12$^{\circ}$CA and turbo charger (compressor 0.6A/R+46Trim, turbine 1.0A/R+57Trim) is the best in the full range of operating in the engine performance and the exhaust characteristics of NO$\_$x/ concentration. Therefore their factors are appropriated as intake system, injection and turbocharger system.

본 연구는 배기량이 16.7ι인 V8형 터보차져 인터쿨러 직접분사식 디젤기관에서 흡기포트의 선회유동과 연료분사계 및 과급기가 기관성능 및 배출가스특성에 미치는 영향을 실험적으로 고찰하며 성능을 개선하는데 있다. 일반적으로 기관의 출력을 높이기 위하여 과급기 및 인터쿨러를 장착하여 과급공기를 냉각시켜 과급효율을 더욱 높인 TCI디젤기관이 보편화되고 있다 본 연구의 결과로서 흡기포트의 선회비가 2.25인 경우에서 압축비 17.5, re-entrant 8.5$^{\circ}$ 형 연소실, 노즐분공경 $\Phi$0.33*3+$\Phi$0.35*2, 노즐돌출량 3.18mm, 분사시기 BTDC 12$^{\circ}$CA, 과급기 T042(압축기 0.6A/R+46Trim, 터빈 1.0A/R+57Trim)경우가 기관성능 및 NO$_{x}$ 농도의 배출특성을 고려할 때 운전영역에서 가장 우수하여 흡기포트, 분사계 및 과급기에 대한 각 인자를 적정화할 수 있었다.

Keywords

References

  1. SAE 720102 Effect of Air Swirl on Smoke and Emissions from Direct Injection Diesel Engines Kahn, I.M.;Wang, C.H.T.;Langridge, B.
  2. SAE 730169 Factors Effecting Smoke and Gaseous Emissions from Direct Injection Engines and a Method of Calculation Kahn, I.M.;Greeve, G.;Wang, C.H.T.
  3. SAE 851542 Smoke and Fuel Consumption Measurements in a Direct Injection Diesel Engine with Variable Swirl Timoney, D.J.
  4. SAE 851543 A Simple Technique for Predicting Optimum Fuel-Air Mixing Conditions in a Directed Injection Diesel Engine with Swirl Timoney, D.J.
  5. SAE 900440 Combustion Chamber Shape and Pressurized Injection in High Speed Direct Injection Diesel Engine Ikegami, M.;Fukuda, M.;Yoshihara, Y.;Kaneko, J.
  6. SAE 720755 Exhaust Emission Control in Medium Swirl Rate Direct Injection Diesel Engines Paker, R.F.;Walker, J.W.
  7. SAE 820358 Interaction of Port Design and Injection Rate for a D.I Diesel Pettifer, H.F.
  8. JSAE v.44 no.8 A Study on Effects of High Pressure Injection for DI Diesel Combustion Watanabe, S.;Takahashi,T.;Sami, H.
  9. JSAE v.22 no.4 Combustion Process in a DI Diesel Engine with High Pressure Injection Effects of Spatial Distribution of Fuel Spray in a Combustion Chamber on a NO, Emission Hiroyasu, H.(et al.)
  10. Proceedings of JSAE 924, No.924120 In-Cylinder Combusti- on flow Study of a DI Diesel Engine - The Effect of Combustion Chamber Geometry on In-Cylinder Flow- Sato, K.;Zhang, L.;Minami, T.;Takatsuki, T.;Yokota, K.
  11. The 10th Internal Combustion Engine Symposium Effect of Combustion Chamber Geometries on In-Cylinder Flow Motor and Exhaust Emission in a Direct Injection Diesel Engine Hou, Z.;Kijawa, H.