한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

실험계획법을 이용한 연삭가공물의 형상오차 분석

Geometric Error Analysis of Surface Grinding by Design of Experiments

  • 발행 : 2004.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Various controllable parameters of an experiment have influence on grinding process. In order to get good products with a high quality, these parameters should be considered whether each parameter has relations to the quality. This paper describes the use of the design of experiments to minimize geometric error in surface grinding. Controllable parameters for the design of experiments were selected as spindle speed, table speed, depth of cut and grain size. From the experimental results, a degree of influence between these parameters and the geometric error was evaluated. An optimal set of grinding conditions was obtained by means of analysis of variance(ANOVA).

키워드

참고문헌

  1. CIRP v.37 Thermally Induced Grinding Damage in Superalloy Materials Kovach, J. A.;Malkin, S.
  2. JSPE v.45 no.5 Local Thermal Expansion of Workpiece under Grinding Okuyama, S.;Kawamura, S.
  3. JSME v.35 no.269 On the Floating Behavior of Surface Grinding Machine Table (3rd Report)-The Effect of the Behavior of Tables on the Machining Accuracies Nakano, Y.;Shiozaki, S. https://doi.org/10.1299/kikai1938.35.225
  4. JSPE v.54 no.8 Study on the Flatness of Work Produced by Surface Grinding-Effect of Bending Caused Grinding Heat Nishihara, T.;Okuyama, S.;Kawamura, S.
  5. JSPE v.61 Analysis of Steady State Thermal Deformations of Workpiece During Surface Grinding Operation Nakano, Y.;Ota, K.
  6. JSPE v.64 Study on the Flatness of Work Produced by Surface Grinding Okuyama, S.
  7. KSMTE v.10 no.2 A Study on Prediction Model of Surface Roughness by the Orthogonal Design for Turning Process Hong, M. S.
  8. Modern Design of Experiments Park, S. H.